CDA CI931 - Manuals

Levelling s To reduce the noise level from the washing machine and to prevent unnecessary movement during use, you should ensure the washing machine is level using the adjustable feet. Please note: Raising the washing machine too high can affect the stability of the appliance. Electrical Connection ...

Electrical information Warning! This appliance must be earthed. The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug, follow the steps below: 1. Remove the fuse cover and fuse. 2. Fit replacement 13A fuse, ASTA approved to BS 1362 t...

Before First Use s When your washing machine has been correctly installed, we recommend that you pre-clean the machine. This is to check that the installation, the connections and the drainage are all correct, and to thoroughly clean the inside of the washing machine before any wash programmes are r...

Preparing Garments for Washing Preparation s Before placing the clothes in the drum, make sure all the pockets are empty (Figure 11). Any small objects may block the drain pump. Sorting the Clothes Sort the clothes according to fabric and how they are made: s We recommend using the delicate programm...

Detergents and Additives Your washing machine’s detergent dispenser has three compartments. s Add the detergent or additive to the detergent dispenser before starting the wash programme (Figure 15). s Liquid detergents may also be used in this washing machine. The level of liquid must never be highe...

Washing Machine Programmes There are five types of programme: Normal programmes Delicate programmes Wool programme Auxiliary programmes Drying programmes Eco Note We recommend you choose a wash programme without prewash whenever possible. This will save you money and help protect the environment. PRO...

Spin Speed Selection and Anti-Crease You should first select the wash programme and then select the wash options (Changing the programme cancels the preset selected options). Each selected programme has its own preset spin speed. Spin speed s You can reduce the spin speed or remove it completely by p...

Delay Timer Delay timer selection button s A delay of up to 24 hours can be selected. The delay must be selected after choosing the wash programme. s To set the required delay, press the delay timer button (Figure 26). Each time the button is pressed the delayed start of washing is increased by one ...

Starting Up Start/Pause button s To start up the washing machine you have to press the Start/Pause button (Figure 29). s The time remaining (in minutes) until the end of the programme will appear on the display at all times. Lock Function Lock function selection s The lock function ensures that the ...

fig. 34 fig. 35 18 Maintenance After each wash, leave the door open for a while to allow the air to circulate freely inside the machine. From time to time, depending on the hardness of your water, it is recommendable to run a full wash cycle using a decalcifying product. This will extend the life of y...

Cleaning the Filter s Clean the accessible filter if the drain pump is blocked by any foreign objects. s Open the kickplate cover with the aid of a coin and by gently pulling open (Figure 36). s Place a container under the drain pump filter to collect any water that comes out of it (Figure 37). s Remo...

20 Safety and Troubleshooting s If you detect any problems with your washing machine, you will probably be able to rectify them yourself by consulting the following instructions. s If this is not the case, unplug the appliance and contact CDA Customer Care. Do not open up the washing machine. It doe...

Problems Why doesn’t the washing machine drain or spin-dry? s If this failure is detected, F02 will appear on the display. The reasons for the F02 indicator may be the following: s s The washing machine drain pump is blocked, building drainage pipes are blocked, or incorrect pump electrical connecti...