Campbell Hausfeld PW1876 - Manual
Campbell Hausfeld PW1876 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Instrucciones de montaje y lista de piezas; Lista de Repuestos; Replacement Parts List
- Page 3 – CONEXIÓN DEL SISTEMA; Especificaciones; Instrucciones de Montaje; Conexión de la Manguera de Jardin y del Sistema; BRANCHEMENT DU SYSTÈME; Spécifications; Instructions de Montage; Branchement du Tuyau d’Arrosage et du Système
- Page 4 – Notes; Numéro; Liste de Pièces de Rechange
Max Pressure with
Effective Pressure
Maximum
Motor Power
Maximum Inlet
Unit
Model
Standard Lance
w/Turbo Lance
Capacity
(Single Phase)
Voltage
Water Temperature
Weight
Electric Pressure
Washer
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-
erty damage! Retain instructions for future reference.
IN455600AV 1/99
© 1999 Campbell Hausfeld
Specifications
PW1876
1300 psi
1850 psi
1.9 GPM
14.5 Amps
120V
100˚F
39 lbs.
Assembly Instructions
Assembly Instructions and Parts List
PW1876
Figure 1
Figure 2
Figure 3
Figure 4
Garden Hose and System Connection
GARDEN HOSE CONNECTION
INSTRUCTIONS
1. Attach nipple adapter to inlet fit-
ting on the unit (this may already
be attached to the pump).
2. Attach quick connect fitting to gar-
den hose.
3. Pull side “A” of quick connect
fitting toward garden hose and
push onto nipple adapter.
4. Push side “A” of quick connect
fitting towards nipple adapter and
release.
SYSTEM CONNECTION
1. Insert lance into the gun and turn
clockwise to positive stop as shown
in Figure 6.
2. Ensure that the power switch is in
the “OFF” position.
3. Attach the high pressure hose and
gun assembly to the unit.
4. Connect garden hose as explained
under
Garden Hose Connection
Instructions
.
5. Plug the
power cord
into a
grounded
120V outlet
and press
the reset
button as
shown in fig-
ure 7. THIS
MUST BE
DONE EACH TIME THE UNIT IS
PLUGGED INTO AN OUTLET.
"A"
Figure 5 - Garden Hose Connection
Figure 6 - Gun/Lance Connection
Reset
Figure 7 - Grounded
plug/reset button
Quick Connect Fitting
Garden
Hose
Nipple
Adapter
NOTE: REFER TO PRODUCT MANUAL FOR
ALL SAFETY INSTRUCTIONS
For parts, product & service information
visit
www.campbellhausfeld.com
1
3
5
4
6
7
2
12
10
11
8
Para ordenar repuestos, sírvase llamar al 1-800-330-0712 (En
los Estados Unidos, o llame a su distribuidor local)
Instrucciones de montaje y lista de piezas
PW1876
Notas
U
L
Approved
#7P64
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5. Enchufe el cordón deenergía enun tomacor-riente de 120V conectadoa tierra, ypresione elbotón dereposicióncomo semuestra en la figura 7. ESTO DEBEHACERSE CADA VEZ QUE SEENCHUFE LA UNIDAD EN UN TOMA-CORRIENTE. 6. Abra la llave del agua. 7. Presione el gatillo y manténgalo presionado por 1 minuto pa...
INSTRUCCIONES DE CONEXIÓN DELA MANGUERA DE JARDÍN 1. Inserte el adaptador de manguito en la conexión de entrada de launidad (es posible que ya estéconectado a la bomba). 2. Fije el conector rápido en la manguera de jardín. 3. Jale el extremo "A" del conector rápido hacia la manguera de jardí...
1 3 5 4 6 7 2 12 10 11 8 Pour Pièces de Rechange, Appelez 1-800-330-0712 Instructions de Montage et Liste de Pièces de Rechange PW1876 Notes 13 mm Figure 8 - Raccordements Branchement duSystème (Suite) Sortie Arrivée Cordond’Alimentationavec DDFT Réservoir de Détergent TuyauHautePression Interrupteu...
