Worx WX426 - Manuals

10 Electric Circular Saw WX426 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and...

11 Electric Circular Saw WX426 FURTHER SAFETY INSTRUCTIONS FOR ALL SAWS KICKBACK CAUSES AND RELATED WARNINGS - Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator. - When the blade is pinched o...

13 Electric Circular Saw WX426 To reduce the risk of injury, user must read instruction manual Double insulation Warning Wear ear protection Wear eye protection Wear dust mask Do not stare into beam Laser radiation RCM marking Before any work on the machine itself, pull the mains plug from the socke...

14 Electric Circular Saw WX426 OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Recommendation that the tool always be supplied via a residual current device with a rated residual current of 30 mA or less INTENDED USE: The tool is intended for ripping and cros...

15 Electric Circular Saw WX426 TROUBLE SHOOTING Symptom Possible Causes Possible Solution Tool will not start when operating the on/off switch. Power cord not plugged in.Power cord is broken.Carbon brush has worn down Check to make sure power cord is connected well into a working outlet.Unplug the p...