Wayne Dalton 8500 - Manuals

Page 2 - Important Safety Instructions; WARNING; Tools Required

Important Safety Instructions Definition of key words used in this manual: WARNING WARNING INDICATEs A POTENTIALLy hAzARDOus sITuATION WhICh; If NOT AvOIDED, COuLD REsuLT IN sEvERE OR fATAL INjuRy. CAuTION: PROPERTY DAMAGE OR InjuRY CAn RESuLT fROM fAILuRE TO fOLLOW InSTRuCTIOnS. IMPORTANT: REquIRED...

Page 3 - Door Section Identification; Removing an Existing Door; Preparing the Opening

5/16” x 1 5/8” Hex head lag screws (as required) 1/4”-20 x 11/16” Self drilling screws (as required) 1/4”-20 x 5/8” Self drilling screws (as required) (2) 5/16”-18 Hex nuts (2) 3/8”- 16 Hex nuts 1/4”- 20 Flanged hex nuts (as required) 3/8” Washer 1/4”-20 x 7/8” Self drilling screws (as required) 1/4...

Page 5 - InsTallaTIon; Bottom Brackets and Counterbalance; hinge Attachment

InsTallaTIon Before installing your door, be certain that you have read and followed all of the instruc- tions covered in the pre-installation section of this manual. failure to do so may result in an improperly installed door. Bottom Brackets and Counterbalance 1 Tools: Power drill, 7/16” Socket dr...

Page 7 - Lift handles; step Plate

Please Do not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the find a Dealer section online at www.wayne-dalton.com 8500 LT-coM Steel Strutting Schedule---Brown colored Do...

Page 8 - Top section

Please Do not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the find a Dealer section online at www.wayne-dalton.com Flag angle lag screw locations Vertical track Jamb brac...

Page 9 - Attaching hor Tracks to vertical Tracks; Adjusting Top Brackets; End Bearing Brackets

Please Do not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the find a Dealer section online at www.wayne-dalton.com (4) 1/4”- 20 x 5/8” Self-drilling screws (3) 1/4”- 20 x...

Page 11 - Rear support

Please Do not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the find a Dealer section online at www.wayne-dalton.com securing Door for spring Winding 19 Tools: Vice Clamps ...

Page 13 - Trolley Arm hookup; side Lock; Cleaning Your Garage Door; optional Installation

Trolley Arm hookup Tools: Needle nose pliers NOTE: If Wayne-Dalton operator/ trolley bracket was installed, follow these directions. Align hole in the door arm with holes in operator bracket tabs, as shown. Attach with 5/16”-18 x 3-1/2” hex bolt, 3/8” washer and 5/16”-18 nut. Trolley arm Operator br...

Page 15 - Lifetime limited warranty; Warranty

Lifetime limited warranty Models 8300, 8500 Subject to the terms and conditions contained in this Lifetime Limited Warranty, Wayne-Dalton Corp. (“Manufacturer”) warrants the sections of the door, which is described at the top of this page, for as long as you own the door against: The door becoming i...

Page 16 - Please Do Not Return This Product To The store; Thank you for your purchase.; find a Dealer; section online at

Covered by one or more of the following Patents; 5,408,724; 5,409,051; 5,419,010; 5,495,640; 5,522,446; 5,562,141; 5,566,740; 5,568,672; 5,718,533; 6,019,269; 6,089,304; 6,644,378; 6,374,567; 6,561,256; 6,527,037; 6,640,872; 6,672,362; 6,725,898; 6,843,300; 6,915,573; 6,951,237; 7,014,386; 7,036,548...