Wayne Dalton 8000 - Manual
Wayne Dalton 8000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 1: Installing the ECR Lock; C A U T I O N; D O N O T D R I L L L O C K; place the lock section
- Page 3 – Step 2: Outside Lock Handle Assembly; align the; NOTE: Before proceeding to the next step; Step 3: Inside Handle Assembly; position
- Page 4 – Step 4: Installing the Autolatch; locate the
Required Tools
Wayne-Dalton Corp.
P.O. Box 67 Mt. Hope, OH 44660
(888) 827-3667
www.wayne-dalton.com
All Residential Door Models: 8000/9000 Series & Wood Doors
Keyed-in-Handle Autolatch ECR Lock
Installation Instructions
and Owner’s Manual
© Copyright 2003 Wayne-Dalton Corp.
New 6/10/03
Important Notice!
REFER TO THE DOOR MODEL INSTALLATION INSTRUCTIONS MANUAL FOR
IMPORTANT SAFETY NOTICES.
Part No: 307895
(1) Electric Drill
(1) 1/8” Drill Bit
(1) 3/4” Dia. Hole Saw
(1) 7/16” 6 Point Nut Driver
(1) 7/16” Wrench Or Socket
(1) Pliers/Wire Cutter
(1) Phillips Screw Driver
(1) Standard Screw Driver
(1) Center Punch
UNIVERSAL
LOCK STILE
(9200/9600 & 9900)
#261964
(6) 1/4” -20
FLANGED HEX NUTS
#100279
(6) 1/4-20 X 9/16”
TRACK BOLTS
#200527
PHILLIPS HEAD MACHINE SCREWS
(2) 1” (9200) #306564
(2) 1-1/4” (9600/8300 & WOOD)#306565
(2) 1-1/2” (9900) #306566
(2) 1-3/4” (8000/PR9000/8500) #306567
OUTSIDE
HANDLE
#255543
(2) AUTOLATCH
FLIPPERS
#100287
(2)STRIKER
PLATES #299008
INSIDE DOOR HANDLE
#307893
(2) FOAM TAPE
(9200/9600/9900)
3/4” X 2-1/2”
#306653
(6) 1/4-20 X 11/16”
SELF DRILLING
SCREWS #300723
(2) #8 - 32 X 3/4”
PHILLIPS HEAD SELF TAPPING
SCREWS #100278
LOCK CABLE
#307894
LOCK BACKUP PLATE
(8300/8500 & WOOD)
#128564
OR
1/4-14 X 1”
LAG SCREWS
(WOOD DOORS ONLY)
#107584
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
22 Step 1: Installing the ECR Lock C A U T I O N D O N O T D R I L L L O C K SECTION OR INSTALL LOCK ON DOORS WITHOPENERS. THE DOOR AND/ OR OPENER MAYBE DAMAGED IF THE OPENER IS USED WHILETHE DOOR IS LOCKED. NOTE: Common practice for doors with the oddnumber of raised panels is to mount the lock tow...
3 Step 2: Outside Lock Handle Assembly 8000/PR9000 & PR9050 Series doors (see Fig. 4), align the outside handle assembly with the handlepointing towards the floor and insert the assemblythrough the previously drilled 3/4” diameter holes inthe section. Secure the outside lock handle to the sectio...
Step 4: Installing the Autolatch 8000/9000 Series & Wood doors (Fig.1-3), locate the inside handle and uncoil the lock cable, then thread thecable through the inside handle as illustrated ( see Fig.1 ). Locate the autolatch striker plates over the pre-punchedholes in the vertical track nearest t...
