Wayne Dalton 8100 - Manuals

-2- WIND LOAD POST INSTALLATION INSTRUCTIONS Step 1: Attach the header lock bracket to the header using the (4) 5/16” x 1-5/8” lag screws provided as shown in fi gure 1. The header lock bracket should be in line with the intermediate hinges where the post is to be installed and located such that the ...

-3- WIND LOAD POST INSTALLATION INSTRUCTIONS Step 6: Place the post assembly into position by lowering the top plate extension into the notch in the header lock bracket until the top plate extension seats in the bottom of the notch. Allowing the outer post to slide down the inner post, insert the 1/...

-4- WIND LOAD POST INSTALLATION INSTRUCTIONS SECURING POSTS FOR STORAGE Step 1 : Locate a convenient location as close to the door as possible and mount a header lock bracket to the wall such that the distance be-tween the bottom of the header lock bracket and the fl oor is 4” greater than the distan...