Wayne Dalton 5150 - Manuals

Wayne Dalton 5150 – Manual in PDF format online.

Manuals:

Manual Wayne Dalton 5150

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - OPERATING ZONE; You Can Save Time And Effort If You First Establish; All; The Facts About; HEADROOM CHART For Standard Lift Track

HEADROOM “A” “B” SIDE ROOM DAYLIGHT OPENING HEIGHT BACKROOM DAYLIGHT OPENING WIDTH SIDE ROOM OPERATING ZONE You Can Save Time And Effort If You First Establish All The Facts About The “Operating Zone” HEADROOM CHART For Standard Lift Track (Minimum Distance Required) Dim. Y INDICATES THE DISTANCE FR...

Page 3 - SIDEROOM REQUIREMENTS; inch TRACK; bracket is limited to doors 14’2” X 10’ (5 Sections high and smaller).

PG. 14 DIM Y HEADER TO SHAFT CENTERLINE MINIMUM HEADROOM REQUIRED (REFER TO HEADROOM CHART) 8” for 2” TRACK 12” for 3” TRACK EXTEND JAMBS TO OPENING HEIGHT plus DIM Y plus 1 1/2” (MINIMUM LENGTH) TORSION SHAFTS REQUIRE 10” OF SIDEROOM FOR SOLID SHAFTS and 5” OF SIDEROOM FOR TUBULAR SHAFTS NOTE: HEAD...

Page 4 - NOTE: Use a chalk line or line level to ensure; SECTIONS HIGH OR LESS; OVER 8 SECTIONS HIGH

Intermediate hangers for all doors over 11’ high and over 14’ wide. Positioned half way between jamb and rear hanger. Lateral brace all hanger angles. Use a 3/8” X 3/4” truss bolt for roller clearence. 3/8” dia. Bolt should protrude into track to serve as a roller stop. Apply locking pliers to secur...

Wayne Dalton Manuals