Ridgid R82233 - Manuals

6 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols will allow you to operate the tool better and safer. Read The Operator’s Manual Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands S...

7 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, c...

8 FEATURES Fig. 1 COUPLER BIT STORAGE DIRECTION OF ROTATION SELECTOR (FORWARD / REVERSE / LOCK-OUT) PADDLE SWITCH PRODUCT SPECIFICATIONS Motor ................................................................................................................................................................

9 FEATURES KNOW YOUR IMPACT DRIVER See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules. COUPLER Quickly and easily change bits without the need for separate tools. VARIABLE SPEED PADDLE SWITCH The variable speed paddle switch allows ...

10 OPERATION ??????? Ev alu at ee Ev alu er Ev alu ar Ch ar gin g C Ch ar gin g Ch ar gin g a rg a n d Ch ar gin g Ch ar gin g o En ch a rg e Fu ll C o m p let o C h arg e m ax .. Pow er Co r rie n t e A lim e n t at ioio nn De fec tiv ee De fect ue usee De fec tuo sa 12.0v /14.4 v 18.0v Fig. 2 WARN...

11 OPERATION OPERATION OPERATION OPERATION Ready to charge battery pack When battery pack reaches cooled temperature, charger begins fast charge mode W h e n b a t t e r y p a c k re a c h e s w a r m e d t e m p e r a t u re , c h a rg e r begins fast charge mode Charger pre-charges battery until n...

12 OPERATION INSTALLING BITS See Figure 4. n Lock the paddle switch on the driver by placing the direc-tion of rotation (forward-reverse) selector in center lock out position. n Remove the battery pack from the driver. n Pull the coupler away from the driver (1). n Insert driver bit to be used into ...

13 OPERATION TO REMOVE BATTERY PACK See Figure 6. n Locate the latches on the side of the battery pack and depress both sides to release the battery pack from the driver. n Remove the battery pack from the driver. Fig. 7 TO TURN ON PADDLE SWITCH FORWARD TO TURN OFF REVERSE DIRECTION OF ROTATION SELE...

14 OPERATION RIGHT ANGLE DESIGN See Figures 9 - 10. ���The impact driver features a right angle head design to reach into tight areas. WARNING Hold tool by insulated gripping surfaces whenperforming an operation where the screw may contact hidden wiring. Contact with a “live” wire will also make exp...

15 MAINTENANCE WARNING: When servicing use only iden ti cal RIDGID replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, a...

17 WARRANTY Proof of purchase must be presented when requesting war-ranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after. This product is manufactured by One World Technologies, Inc. The trademark is licensed from RIDGID, Inc. All warranty communications...

18 983000-528 2-05 Customer Service Information: For parts or service, con tact your near est RIDGID authorized service center. Be sure to pro vide all rel e vant information when you call or vis it. For the lo ca tion of the au tho rized ser vice cen ter nearest you, please call 1-866-539-1710 or v...