Ridgid R7121 - Manuals - manualsarea.com

Page 3 - GENERAL SAFETY RULES; ELECTRICAL SAFETY

3 GENERAL SAFETY RULES WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) ...

Page 4 - SERVICE; SPECIFIC SAFETY RULES

4 GENERAL SAFETY RULES  Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.  Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make expo...

Page 5 - SYMBOLS

5 SYMBOLS Important: Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency...

Page 6 - ELECTRICAL

6 DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protect-ing insulation. Double insulated tools do not need ...

Page 7 - FEATURES

7 FEATURES Before using this tool, familiarize yourself with all operat-ing features and safety requirements. However, do not let familiarity with the tool make you careless.This new drill is equipped with the following features. See Figure 1. SINGLE SPEED REVERSIBLE SWITCH This drill has a single s...

Page 8 - INSTRUCTIONS; PACKING LIST

8 Fig. 1 SWITCH TRIGGER / FORWARD-REVERSE LEVER SPADE HANDLE LOCK-ON BUTTON CHUCK AUXILIARY HANDLE LIGHTED PLUG FEATURES UNPACKING INSTRUCTIONS When unpacking the drill:  Carefully remove the tool and accessories from the box.  Make sure that all items listed in the packing list are included. ...

Page 9 - ASSEMBLY; INSTALLING AUXILIARY HANDLE

9 WARNING: The tool should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury. ASSEMBLY INSTALLING AUXILIARY ...

Page 10 - TO INSTALL BITS; CHUCK KEY

10 ASSEMBLY Fig. 4 TO INSTALL BITS See Figure 4.  Unplug the drill.  Insert the chuck key and twist counterclockwise as shown in figure 4.  Insert the drill bit into the chuck the full length of the jaws. WARNING: Do not insert drill bit into chuck jaws and tighten as shown in figure 5. This coul...

Page 11 - OPERATION; SWITCH; REVERSIBLE; APPLICATIONS

11 OPERATION WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury. SWITCH See Figure 6. To turn the drill ON, depress the...

Page 12 - DRILLING

12 DRILLING See Figures 8 and 9.  Attach auxiliary handle (except for very light duty jobs)  Depress and release the switch trigger to be sure the drill is in the OFF position before connecting it to power supply.  Secure the material to be drilled in a vise or with clamps to keep it from turning...

Page 13 - MAINTENANCE; CHUCK REMOVAL

13 MAINTENANCE Fig. 10 CHUCK REMOVAL See Figure 10, 11, and 12. The chuck must be removed in order to use some acces-sories. To remove:  Unplug the drill.  Open chuck jaws using the provided chuck key.  Insert a 3/8 inch (10 mm) or larger hex key wrench into the chuck of the drill and tighten the...

Page 14 - BRUSH REPLACEMENT

14 MAINTENANCE WARNING: This tool should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury. BRUSH REPLACEMEN...

Page 15 - GENERAL; ACCESSORIES

15 MAINTENANCE WARNING: When servicing use only identical RIDGID ® replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and ma...

Page 16 - NOTES

Page 17 - WARRANTY

17 WARRANTY Proof of purchase must be presented when requesting war-ranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after. This product is manufactured by One World Technologies, Inc. The trademark is licensed from RIDGID, Inc. All warranty communications...

Page 18 - Customer Service Information:; OPERATOR’S MANUAL

18 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid...