Raypak Y-200 Series - Manuals

Installation and Operating Manual 4-20 mA / 2-10 VDC Input Control Module Contents Introduction ............................................................... 1 Important Safety Instructions .................................... 1 Installation ...........................................................

4-20 mA / 2-10 VDC Input Control Module Installation and Operating Manual Installation 1. Verify that the control signal is within the 4-20 mA / 2-10 VDC parameter. 2. Turn off the power to the Y-200. 3. Open the front cover of the Y-200 to access the display/keypad door. 4. Open the display/keypad ...

Installation and Operating Manual 4-20 mA / 2-10 VDC Input Control Module Start-up NOTE: The 4-20 mA / 2-10 VDC Module can be set up for 4-20 mA mode or 2-10 VDC mode, not both. 4-20 mA Mode 1. Restore power to the Y-200. 2. Set the SW1-2 dip switch (4-20 mA) to the ON position, and the SW1-1 dip sw...