Polycom 70 - Manuals

INSTALLING THE IPOWER 70 ROOM CAMERA 6 Important NoteAbout Moving theCamera The iPower 70 camera is designed to be controlled (moved) from the collaboration system wireless keypad, the keyboard, or the remote control. Be sure that your system is turned on before you move the camera. You should not m...

Attaching the Camera to a Monitor 7 Attaching theCamera to aMonitor Note: If you are installing a second monitor for a iPower 900 system, be sure to install the iPower 70 camera on the NTSC or PAL monitor and not on the VGA monitor. If you are installing a second monitor for a Concorde•4500 or Venue...

INSTALLING THE IPOWER 70 ROOM CAMERA 8 Connecting theCamera Cable Caution Whenever you plug a cable into this camera, hold the camera by its base, not by the camera head. To connect the camera cable: 1. Plug the 8-pin camera cable (labeled with the icon on both cable collars) into the 8-pin camera c...

Connecting an Additional Power Cable 9 Connecting anAdditional PowerCable Although the camera cable provides power to the iPower 70 camera, if you are using a camera cable longer than 32.8 feet (10 meters), you must use an additional power cable for the camera. To connect an additional power cable: ...

INSTALLING THE IPOWER 70 ROOM CAMERA 10 Service andSupport For support or service, please contact your Polycom service provider or call Polycom Technical Support. You can find phone numbers for Technical Support in your area at the Polycom web site, www.polycom.com. Specifications Physical Specifica...