Planar PX2611W - Manuals - manualsarea.com

Page 3 - Contents

1 Contents Preface .........................................................................................2 Installation....................................................................................4 Unpacking .....................................................................................

Page 4 - Preface; Warning

2 Preface This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Th...

Page 5 - Important Safety Instructions; Important Recycle Instruction:

3 Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean the LCD Monitor screen: -- Power off the LCD Monitor and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a rag. -- Gently clean the screen wi...

Page 6 - Installation; Unpacking

4 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little p...

Page 7 - Adjust height and angle of Tilt stand

5 Adjust height and angle of Tilt stand The monitor screen may be raised or lowered and tilted (-5 to 40 degree). To raise or lower the monitor screen, place hands on each side of the monitor screen and lift or lower to the desired height as shown in the right figure. 40 o 5 o 170 o 170 o Figure 1-1...

Page 8 - Connecting the AC Power

6 Connecting the AC Power 1. Connect the power cord to the LCD Monitor.(See Fig. 1-4) 2. Connect the power cord to an AC power source. 3. Turn the AC power switch to On. AC Power Jack Power Cord AC Power switch Figure 1-4 Connecting the USB Hub 1. Connect the “A“ end of the USB cable to your compute...

Page 9 - Display Controls; MENU 2; EXIT 3; D+1 Key Function Definition

7 Display Controls User Controls A brief description and the location of all LCD Monitor functions controls and indicators Figure 2-1 1 Push to turn ON or turn Off. MENU 2 Activates OSD main menu. EXIT 3 Exit OSD display / DV mode hot key. SOURCE 4 Select DVI or D-SUB signal source. (Toggle Switch) ...

Page 11 - Function Description

9 Function Description Figure Function Function Description DV MODE The following DV mode display setting can be selected by OSD (STANDARD/TEXT/sRGB/MOVIE/GAMING/PHOTO) Default setting: TEXT BRIGHTNESS Adjust the brightness. Factory setting: 100.0% CONTRAST Adjust the image contrast. Factory setting...

Page 14 - Target color coordinates

12 Auto Adjust (Analog Input Only) When the monitor is displayed for the first time and the resolution is 800x600 and above, the monitor will auto adjust itself. To manually execute the Auto Adjust function, press the Auto button. Target color coordinates Color Temp. 9300K 7500K sRGB u’ 0.189 0.194 ...

Page 15 - OSD Lock Out Function; Option 1: OSD lock – all buttons be locked except the “POWER” button.

13 OSD Lock Out Function OSD Lock Function allows you to lock out the OSD menu and the button keys. To activates the OSD lock function, the monitor must be in a normal display mode and the information menu as shown in fig-2-4 must be activated. Then follow the instructions below. fig-2-4 Option 1: O...

Page 16 - Technical Information; Specifications

14 Technical Information Specifications LCD Panel Size 26" Display Type Active matrix color TFT LCD Resolution 1920 x 1200 Display Dot 1920 x (RGB) x 1200 Display Area (mm) 550.08 x 343.8 (H x V) Display Color 16.7M (RGB 8 bit) Video Input Signal Input Impedance Polarity Amplitude Multi-mode Sup...

Page 17 - Power Management

15 Power Management Mode Power Consumption* AC Input LED Color DPM ON 135W maximum 240 VAC Green DPM OFF 2W maximum 240 VAC Amber DC switch off 1W maximum 240 VAC Dark Disconnected 2W maximum 240 VAC Dark Meeting VESA DPM requirements measured from AC Input end of AC power cord. Sync Input Analogue ...

Page 20 - Troubleshooting

18 Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This L...