Planar PLL2710W - Manual - manualsarea.com

Page 2 - Content

Content Operation Instructions................................................................................................................................................. 1 Safety Precautions ..........................................................................................................

Page 3 - Operation Instructions; Reorient or relocate the receiving antenna.

1 Operation Instructions Thank you for purchasing the PXL2760MW LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the limits for a Class ...

Page 4 - Safety Precautions

2 Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do:  Turn off the product before cleaning.  LED Display screen surface may be cleaned using a soft clean cloth moistened with mild window glass commercial c...

Page 5 - Package Overview; LED LCD Monitor

3 Package Overview Congratulations on your purc hase of this hi gh per for mance edge lit LED LCD monitor. This LED LCD Monitor comes with the following accessories: LED LCD Monitor Base Power Cord VGA Signal Cable User’s Guide

Page 6 - First Setup; Install the stand base; Stand the LED LCD Monitor up.; Disconnecting the stand base; hooks down as directed below.

4 First Setup Install the stand base 1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. 2. Unpack the base, one hand hold the monitor, the other hand attach the...

Page 7 - Front View of the Product; Confirm Select /Input select/Auto adjust

5 Front View of the Product ① ② ③ ④ ⑤ ① OSD Turn On/ Off ② Contrast/Brightness /Scroll Down/Adjust Decrease ③ Preset Mode/Scroll Up/ Adjust Increase ④ Confirm Select /Input select/Auto adjust ⑤ Power ON/OFF/ LED Indicator .

Page 8 - Rear View of the Product; Power Input

6 Rear View of the Product ① ② ③ ① Power Input ② DVI Input (DVI 24 pin) ③ VGA Input (D-Sub 15 pin)

Page 9 - Quick Installation

7 Quick Installation 1. Connect either VGA or DVI Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect power cord to a properly grounded AC outlet, and then to the monitor. 3. Power-ON computer and then POWER-ON the monitor. 4. Set the timing mode ...

Page 10 - Basic Operation; Using the OSD Menu

8 Basic Operation Before using the LED LCD Monitor:  Connect external equipment properly.  Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press Power button on the front of LED LCD Monitor. The power LED indicator light will b...

Page 12 - Advanced Operation—OSD Menu

10 Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor. Press the 1 button to display the OSD Menu, and use ▼ or ▲ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertic...

Page 15 - Supporting Timing Modes; Doing so may result in permanent damage to your LED LCD Monitor.

13 Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 76...

Page 16 - Technical Information

14 Technical Information Panel 27” TFT (with LED backlight) Power Management On: 30 Watts (typical), 40 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.3114 x 0.3114 mm Display Color 16.7M T...

Page 17 - Wall-Mount Installation Instructions; Preparing To Install The Optional Wall Mount Arm (not included); Lay the LED LCD Monitor face down on a soft surface.; Attaching The Optional Wall Mount Arm (not supplied); Place the wall mounting arm onto the back of the LED LCD

15 Wall-Mount Installation Instructions Preparing To Install The Optional Wall Mount Arm (not included) This LED LCD Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure belo...

Page 18 - Care and Maintenance; Care; Put your LED LCD monitor in a well ventilated area.; Note; Pull the base from Parallel versus Panel to Vertical.; Safety Tips; Troubleshooting; No power; Make sure all signal cables are installed.; Power on but no screen image; Connect the LED LCD monitor to another computer.; Planar Suppor t; Planar Support

16 Care and Maintenance Care  Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your LED LCD monitor away from the sun to reduce glare.  Put your LED LCD monitor in a well ventilated area.  Do not place any heavy things on top of your LED LCD monitor.  Make cer...

Planar PLL2710W - Manual

Table of Contents:

Summary

Other Planar Models