Planar PL1911M - Manual

5 Connecting the LCD Monitor and Base When you open the box, place the monitor and put on the desk first. (See fig. 1-1)  Connect the LCD monitor and base.  Using your hand, lock the base and neck by screwing the thread clockwise.  To unlock the height adjustment feature of the stand, locate the ...

6 Connecting the Display 1. Power off your computer. 2. Connect one end of the signal cable to the LCD Monitor’s VGA port or DVI port. (See Fig 1-3) 3. Connect the other end of the signal cable to the VGA port or DVI port on your PC. 4. Make sure connections are secure. Figure 1-3 Connecting the AC ...

7 Optional Mounting Alternatives Warning: The monitor stand base may forcefully extend and cause injury. Raise the monitor to its "Full Up" position before removing the monitor stand. Detaching LCD Monitor from Its Stand Unscrew screws  the swivel base support column and pull down  the hin...

8 Display Controls User Controls A brief description and the location of all LCD Monitor functions controls and indicators: Figure 2-1 1 Power LED will be Green when the monitor is on, Yellow when in power saving mode, and Dark when the monitor is off. Press this button to turn on and turn off the m...

9 Function Description Icon Function Function Description Brightness 101 scales of brightness are available to choose from (0 to 100). Contrast 101 scales of contrast are available to choose from (0 to 100). H. Position This function let's you adjust the display's horizontal position. (Only support ...

10 OSD Lock Out Function When the monitor is in normal display, you can enable the “OSD Lock Out” function. Option 1 : OSD lock – all 4 buttons are locked except the “ POWER ＂ button. Press and hold the , and buttons at the same time for 3 seconds to lock the buttons. The monitor will show an “ OSD ...

11 Technical Information Specifications LCD Panel Size 19" Display Type Active matrix color TFT LCD Resolution 1280 x 1024 Display Dot 1280 x (RGB) x 1024 Display Area (mm) 376.32 x 301.056 (H x V) Display Color 16.7M (RGB 6 bit+FRC) Lamp Voltage (typical) 660 Vrms Lamp Current (typical) 7.5 mA ...

13 Standard Timing Table If the selected timing is NOT included in the table below, this LCD monitor will use the most suitable available timing. SYNC TOTAL ACTIVE SYNC FRONT BACK PIXEL TIMING FH(kHZ) FV(HZ) POLARITY (DOT/ LINE) (DOT/ LINE) WIDTH (DOT/LINE) PORCH (DOT/LINE) PORCH (DOT/LINE) FOREQ (M...

14 Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This L...

15 Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/pro...