Planar IX2850 - Manuals

Planar IX2850 – Manual in PDF format online.

Manuals:

Manual

Manual Planar IX2850

Summary

Page 2 - Content

Content Operation Instructions ................................................................................................................................................... 1 Unpacking Instructions ...................................................................................................

Page 3 - Operation Instructions; Reorient or relocate the receiving antenna.

Operation Instructions Thank you for purchasing the IX2850 LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the limits for a Class B dig...

Page 4 - Avertissement de la FCC:; doivent être utilisé pour être conforme aux limites d’émission.

COMMUNIQUE D’AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Classe B, suivant la partie 15 des règlements de la FCC. Ces limites ont été dé...

Page 6 - Consignes de sécurité

Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d’entretien recommandés dans ce manuel de l’utilisateur pour maximiser la durée de vie de votre appareil. A faire : Éteindre le produit avant de le nettoyer. La surface de l'écran tactile peut être nettoyée avec un ...

Page 7 - Package Overview

Package Overview LED LCD Monitor Base Power Cord DisplayPort Cable HDMI Cable USB 3.0 Cable (A to B) User’s Guide 5

Page 8 - First Setup; Install the stand base; hooks down as directed below.

First Setup Install the stand base 1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. 2. Unpack the base, one hand hold the monitor, the other hand attach the b...

Page 9 - Front View of the Product; LED Indicator

Front View of the Product ①②③④ ⑤⑥ ① OSD Turn On/ Off ② Scroll Down/ Adjust Decrease/ Audio/ Preset * ③ Scroll UP/ Adjust Increase/ PIP (PBP)/Swap * ④ Input select/ Confirm Selection/ Auto * ⑤ Power On/ Off ⑥ LED Indicator * Hot keys Instructions please see “Using the OSD Menu” on page 10. 7

Page 10 - Rear View of the Product; Power Input

Rear View of the Product ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ① Power Input ② DVI Input (DVI 24 pin) ③ HDMI-2 input (HDMI 19 pin) ④ HDMI-1 input (HDMI 19 pin) ⑤ DisplayPort-2 Input (DisplayPort 20 pin) ⑥ DisplayPort-1 Input (DisplayPort 20 pin) ⑦ VGA Input (D-Sub 15 pin) ⑧ Up-stream USB port (to PC) ⑨ USB port x 2...

Page 11 - Quick Installation

Quick Installation 1. Connect either VGA, DVI, HDMI or DisplayPort Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Please note. The monitor ships with DisplayPort and HDMI cables only. DVI-dual link, or VGA cable may be sourced separately from a ca...

Page 12 - Basic Operation and Calibration/Reset Instructions; Using the OSD Menu

Basic Operation and Calibration/Reset Instructions Before using the LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press button on the front. The power LED indicator light wi...

Page 14 - Advanced Operation—OSD Menu

Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor. Press the 1 button to display the OSD Menu, and use ▲ or ▼ to select the desired OSD menu. Press 2 to confirm or reach the next sub-menu. To exit press 1 . Short Cuts Function from the button(s)...

Page 17 - In PbP Mode; Splits the screen into four equal quadrants.

In PbP Mode 2PbP. Splits the screen left and right equally. In order to achieve full screen on each side, recommended resolution is 1920 x 2160; however, this is a custom resolution. Check your video card to see if custom resolution is supported. If not supported, black bars on top and bottom will r...

Page 22 - Supporting Timing Modes; STANDARD

Supporting Timing Modes STANDARD RESOLUTION STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VESA 1280 x 1024 @ 75Hz VGA 640 x 480 @ 60Hz VESA 1440 x 900 @ 60Hz MAC 640 x 480 @ 67Hz VESA 1440 x 900 @ 75Hz VESA 640 x 480 @ 72Hz VESA 1600 x 900 @ 60RB VESA 640 x 480 @ 75Hz VESA 1680 x 1050 @ 60Hz VESA 800 x 6...

Page 23 - Technical Information

Technical Information Panel 28” TFT (with LED backlight) Power Management On: 45 Watts (typical), 75 Watts (maximum) Standby Mode: < 1.2 Watt (USB 3.0) Off: < 0.5 Watt Displayable Resolution UHD 3840 x 2160 max. Vertical Frequency 60Hz max. Compatibility PC VGA Support up to 2048 x 1152 HDMI/ ...

Page 24 - Wall-Mount Installation Instructions; Preparing to Install the Optional Wall Mount Arm (not included)

Wall-Mount Installation Instructions Preparing to Install the Optional Wall Mount Arm (not included) This LED LCD Monitor can be attached to a wall mounting arm purchased separately. Turn the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure below. 1. Lay ...

Page 25 - Troubleshooting; No power; Power on but no screen image; Connect the LED LCD Monitor to another computer.

Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the LED LCD Monitor. Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Make sure all signal cables are in...

Page 26 - Cables and Accessories; Planar Support

24 Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com . Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warrant...