Planar LC SERIES - Manual

USB (Touch Versions)

Touch Controller

US or EU Power Supply

Video Cable

LC SERIES

QUICK START GUIDE

LC Series

Thank you for choosing Planar’s very high-bright LC
series embedded LCD monitor family.

Customer Service:
To view online documentation and frequently
asked questions, or to send an email to our
technical support staff, please visit:
http://www.planar.com/support or call
1-866-PLANAR1 (1-866-752-6271).

To receive advanced notifi cation of product
updates, please register your monitor at
www.planar.com/support.

Planar is one of the world’s most accomplished
providers of fl at-panel displays, with over 24
years’ expertise in fl at-panel innovation. The
company provides the most dependable display
solutions for various applications in industrial,
medical, and commercial markets.

Monitor Set-up

1. If it is necessary, clean the front surface of

the display by using clean, compressed air or

by using only a clean, dry soft cloth.

2. Mount the monitor to your enclosure using

your hardware. Detailed mechanical draw-

ings, including mounting hole patterns,

may be found at:

http://www.planar.com/support

3. Securely tighten all mounting hardware.

4. Connect the video and power cables. The

unit will display a test screen the fi rst time

power is applied without a video signal.

5. Power up the computer.

See the user’s guide for your product at

http://www.planar.com/support for

advanced set-up instructions.

Optional Auto Dimming

The LC17/LC19 is available with optional
auto dimming. This feature allows
the display to automatically adjust its
brightness for optimal viewing at a wide
range of ambient lighting conditions.
For additional information please
view the LC series User Guide at
www.planar.com/support.

Package Overview

Contents -

Important Recycle Instruction -

LCD Lamp(s) inside this

product contain mercury.

This product may contain other

electronic waste that can be

hazardous if not disposed of

properly. Recycle or dispose in ac-

cordance with local, state, or federal

Laws. For more information, contact

the Electronic Industries

Alliance at

WWW.EIAE.ORG.

For

lamp specifi c disposal information

check

WWW.LAMPRECYCLE.ORG.

LCD Display

DVI-D Cable

The test results show that this device meets the FCC rules. Refer to the
product operation manual for FCC classifi cation found at:
http://www.planar.com/support. Those limits are set to protect residential
areas from the devices with harmful emission. This device will produce,
use and radiate radio frequency energy. In addition, failure to follow
the user’s manual to install or use this device might produce harmful
interference with radio communication. Notwithstanding the foregoing,
it does not guarantee that this type of harmful interference does not
occur in some special installations. The interference caused by this device
to the reception of radio or television signals may be verifi ed by turning it
on and off. Any changes or modifi cations to this TFT LCD would void the
user’s authority to operate this device.

020-0605-00

36.61702G001

For best performance, set your computer video
graphics resolution to: 1280 x 1024.

European Union 2002/95/EC Directive on the Restriction
of Hazardous Substances (RoHS)

In February 2003, the European Union issued Directive 2002/95/EC on
the Restriction of Hazardous Substances, commonly known as RoHS,
in certain electrical and electronic equipment. It restricts the use of six
hazardous substances, including lead (Pb). The Directive states that all
new products within its scope, placed on the European market after
July 1, 2006 must be compliant with its requirements.

Planar Systems Inc. is fully in support of and compliant with EU Direc-
tive 2002/95/EC for applicable products within its scope. A Planar part
number will be modifi ed with an “LF” suffi x designation to indicate
RoHS compliance, as shown on the part number label affi xed to the
display and on the box containing the display.

Power Supply

Europe & NA AC Cord

S-Video Cable

Composite Video Cable