Planar PT1945RW - Manuals

Introduction About PT1945R/PT1945RW/PT1945S The PT1945R/PT1945RW/PT1945S is a 19" fl at panel screen with an active matrix, thin- fi lm transistor (TFT) liquid crystal display (LCD). Features include: • Direct Analog signal input• Active matrix TFT LCD technology• PT1945R/S - 1280 x 1024 SXGA re...

Package Overview LCD Display Power Cord VGA Signal Cable RS-232 Cable USB Cable ( A to B) Audio-in Cable Touch Screen Driver Installation CD-ROM Landing Strip User’s Guide xxxxxxxxx / xxxxxxxxx xxxxxxxxx USER’S GUIDE www.planartouch.com Screw DC Power Supply (for PT1945RW only) 3

Installation Product Overview • Front View PT1945R/PT1945S PT1945RW • PT1945R/PT1945S Bottom View RS-232 VGA AC IN USB POWER SWITCH AUDIO • PT1945RW Bottom View POWER SWITCH DC IN VGA RS-232 USB EARPHONE AUDIO 4

5 Start Your Installation Please follow these instructions so that you can hookup the cables to associated connector.1. Lay the LCD fl at on an even surface. 2. Move the stand into position as seen in the step 2 diagram.3. Remove the cable cover as seen in the step 3 diagram.4. Connect the cables to...

Kensington Security Slot The monitor can be secured to your desk or any other fi xed object with Kensington lock security products. The Kensington lock is not included. PT1945R/PT1945S PT1945RW 9

VESA Mount Your Monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface standard which de fi nes a physical mounting interface for fl at panel monitors, and corresponding with the standards of fl at panel monitor mounting devices, such as wall and table arms. The VE...

Remove the Deskstand PT1945R/PT1945S Remove 4 screws and then remove hinge. PT1945RW Remove 4 screws and then remove hinge. 11

User Controls Side Panel Controls PT1945R/PT1945S Icon key Name Menu Up Down Enter Power PT1945RW Icon key Name Menu Up Down Enter Power OSD Key Menu off status Menu on status Menu appear Menu disappear/ return to main item Brightness Main item select up/ Adjust up Mute Main item select down/ Adjust...

How to Use the OSD Menus Icon Key Name Menu Up Down Enter Power 1. Press the “MENU” button to pop up the “on-screen menu” and press “Up” or “Down” button to select among the six functions in the main menu.2. Choose the adjustment items by pressing the “Enter ” button.3. Adjust the value of the adjus...

14 On-Screen Display Menus Main OSD Menu: ITEM CONTENT Contrast The monitor luminance level control. Brightness The monitor backlight level control. Auto Adjust Fine-tune the image to full screen automatically. Left/Right Moving screen image horizontal position to left or right. Up/Down Moving scree...

Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. ► Check that all the I/O and power connectors are correctly and well connected ...

16 Warning Signal If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card.Below are the three kinds of Warning Signal. Please check the cable connections or contact your local dealer or Planar for more information....

Product Dimensions PT1945R/PT1945S 431.8 mm 390.9 mm 358.0 mm 249.6 mm 219.0 mm 212.0 mm 67.0 mm 17 Front View Side View Top View

Compatibility Modes PT1945R/PT1945S Mode Resolution H-Frequency (KHz) V-Frequency (Hz) IBM VGA 720X400 31.47 70 IBM VGA 640X480 31.47 60 Apple MacII 640X480 35.00 66 VESA VGA 640X480 37.86 72 VESA VGA 640X480 37.50 75 VESA VGA 800X600 35.16 56 VESA VGA 800X600 37.88 60 VESA VGA 800X600 48.08 72 VESA...

Touch Screen Driver Installation The PT1945R/PT1945RW/PT1945S is available with both RS232 and USB connections. The touch driver is located on the enclosed CD-ROM for these operating systems: Windows ® 7, VISTA, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux, Apple ® Mac OS. Please Note: The PT194...

If you are using a PC running Windows ® CE, follow the instructions below: 1. Power on the computer.2. Make sure that the RS232 or USB cable is connected to the computer.3. Using Platform Builder, build an image fi le by following the step-by-step instructions found in the zipped fi le on the CD-ROM...

Product Registration and Technical Support Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the bene fi ts of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/...