Page 5 - Table of Contents
1 Usage Notice Precautions ........................................................................................ 2 Introduction About Planar ’s PT1710MX.. ............................................................... 3 Touch Screen for PT1710MX……………………………………………..4 Package Overview ................
Page 6 - Usage Notice; Precautions
2 Usage Notice Warning - To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. Warning - Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this user ’s...
Page 7 - Introduction
3 Introduction About Planar’s PT1710MX The PT1710MX is a 17” flat panel screen with an active matrix, thin-film transistor (TFT) liquid crystal display (LCD). Features include: Direct Analog signal input Active matrix TFT LCD technology 1280x1024 SXGA resolution 17” viewable display area 31.5 ~ 80 k...
Page 9 - Package Overview
5 Package Overview LCD Display Power Adapter Power Cord VGA Signal Cable Audio-in Cable USB Cable RS-232 Cable Landing Strip Touchscreen Driver Installation CD-ROM User’s Guide
Page 10 - Installation; Product Overview
6 Installation Product Overview Front View Back View
Page 12 - Kensington Security Slot
8 Kensington Security Slot The monitor can be secured to your desk or any other fixed object with Kensington lock security products. The Kensington lock is not included.
Page 13 - VESA Mount Your Monitor
9 VESA Mount Your Monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface Standard which defines a physical mounting interface for flat panel monitors, and corresponding standards for flat panel monitor mounting devices, such as wall and table arms. The VESA mountin...
Page 14 - Start Your Installation; Remove the Back Cover
10 Start Your Installation Remove the Back Cover Please follow these instructions to remove the cover on the back panel of the LCD so that you can connect the cables in “Connector Ports A.” 1. To remove the back cover, follow the arrows in Figure A and press with both your thumbs. The cover should b...
Page 17 - User Controls; Front Panel Controls; MENU
13 User Controls Front Panel Controls No / Icon Control Function MENU Menu button Display the OSD menus SELECT/AUTO Select/Auto Select – To select the adjustment items from OSD menus. Auto – To activate the “Auto Adjustment” function to obtain an optimum image. Brightness Minus/Minus 1. Decreases th...
Page 18 - How to Use the OSD Menus
14 How to Use the OSD Menus 1. Press the "MENU" button to pop up the “on-screen menu” and to select among the four Main Menus. 2. Choose the adjustment items by pressing the “Select/Auto” button. 3. Adjust the value of the adjustment items by pressing the “ ”or “ “ button. 4. The OSD menu wi...
Page 19 - On-Screen Display Menus
15 On-Screen Display Menus Main OSD Menu: MAIN MENU SUB MENU Function Description Remark Au to-Adjus t ment No/Yes Choose this function to obtain an optimum image. Cont ras t 0-100 Adjust the contrast of the display image. Default 50 Brightness 0-100 Adjusts the brightness of the image. Default 70 H...
Page 20 - Appendix; Troubleshooting
16 Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. Check that all the I/O and power connectors are correctly and well connected...
Page 21 - Warning Signal; No Signal
17 Warning Signal If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card. There may be two sources for this problem. Please check the cable connections or contact Planar for more information. No Signal This messag...
Page 22 - Product Dimensions
Page 23 - Compatibility Modes
19 Compatibility Modes Mode Resolution V. Frequency (Hz) H. Frequency (kHz) IBM VGA 640 x 350 70 31.5 IBM VGA 720 x 400 70 31.5 IBM VGA 640 x 480 60 31.5 VESA VGA 640 x 480 72 37.9 VESA VGA 640 x 480 75 37.5 VESA SVGA 800 x 600 56 35.2 VESA SVGA 800 x 600 60 37.9 VESA SVGA 800 x 600 72 48.1 VESA SVG...
Page 24 - Touch Screen Driver Installation
20 Touch Screen Driver Installation The PT1710MX is available with both RS-232 and USB connections. The PT1710MX is Microsoft® Windows® HID (Human Interface Device) compatible if you use the USB touch screen interface . No additional software driver is required for general operation of the touch scr...
Page 27 - Product Registration and Technical Support; Register Your Planar Products Today
23 Product Registration and Technical Support Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website at http://www.planar.com/support/product_registration.htm...
Page 31 - 目录
1 目录 使用须知 使用须知 使用须知 使用须知 使用前注意事项 ............................................................................ 2 介绍 介绍 介绍 介绍 Planar PT1710MX 简介 ............................................................... 3 PT1710MX 的触摸屏 ................................................................... 4 组件概览 .....
Page 33 - 使用须知
3 使用须知 警告 警告 警告 警告 - 为了避免火灾或者触电危险,请勿使本产品遭受 雨淋或受潮。 警告 警告 警告 警告 - 请勿打开或拆解本产品,以免遭到电击。 使用前 使用前 使用前 使用前注意事项 注意事项 注意事项 注意事项 遵照本用户手册中建议的所有警告、注意事项和维护步骤,以延 长产品的寿命。 应做: 应做: 应做: 应做: 清洁之前关闭设备。 可以使用干净软布,沾取适度窗户玻璃清洁剂或水与异丙醇 50/50 混合物,清洁触摸屏。 使用沾有适度清洁剂的软布清洁显示器外壳。 只使用随显示器附带的高质量、经过安全认证的交流 / 直流适配 器。 如果长时间不使用设备,请从 AC 电源插...
Page 35 - 介绍; 简介
5 介绍 Planar PT1710MX 简介 简介 简介 简介 PT1710MX 17” 平板显示器采用有源矩阵、薄膜晶体管( TFT ) 液晶显示屏( LCD )。 功能特点: 直接模拟信号输入 有源矩阵 TFT LCD 技术 1280x1024 SXGA 分辨率 17” 可视显示区域 31.5 ~ 80 kHz 水平扫描 56 ~ 75 Hz 高刷新频率 0.264mm x 0.264mm 像素点距 自动调整功能 多语言 OSD 用户控制 VESA DPMS 节能 Kensington 防盗锁槽 100 mm VESA 安装 可拆卸底座,可实现灵活的安装解决方案
Page 39 - 安装; 产品概述
9 安装 产品概述 产品概述 产品概述 产品概述 视图 后视图 LCD显示器 面板控制 底座支架 扬声器
Page 49 - 用户控制; 前面板控制
19 用户控制 前面板控制 前面板控制 前面板控制 前面板控制 编号 编号 编号 编号 / 图标 图标 图标 图标 控制 控制 控制 控制 功能 功能 功能 功能 MENU 菜单按钮 显示 OSD 菜单。 SELECT/AUTO 选择 / 自动 选择 — 从 OSD 菜单中选择调整项目。 自动 — 启动 “ 自动调整 ” 功能以获得最佳图 像。 亮度 减号 / 减号 1. 减小显示图像的亮度。 2. 减小调整项目的值。 亮度 加号 / 加号 1. 增加显示图像的亮度。 2. 增加调整项目的值。 电源开关 打开 / 关闭 LCD 显示器的电源。 电源 LED 1. 绿色表示显示器已开机。 2. ...
Page 54 - 附录; 故障排除
24 附录 故障排除 故障排除 故障排除 故障排除 如果液晶显示器出现故障,请查阅以下内容。如果问题仍未解决,请联系 当地经销商或我们的服务中心。 问题 问题 问题 问题: : : :屏幕上没有图像。 屏幕上没有图像。 屏幕上没有图像。 屏幕上没有图像。 检查所有 I/O 和电源接口均已如 “ 安装 ” 部分中所述正确、完好地连接。 确保接口插针没有弯曲或折断。 问题 问题 问题 问题: : : :只显示部分图像或图像显示不正确。 只显示部分图像或图像显示不正确。 只显示部分图像或图像显示不正确。 只显示部分图像或图像显示不正确。 检查一下计算机的分辨率是否高出液晶显示的分辨率。 重新配置计算...
Page 56 - Out of Range
26 警告信号 警告信号 警告信号 警告信号 如果您在液晶显示器屏幕上看到警告信息,则表示液晶显示器 无法从计算机图形卡接收完好的信号。 出现此问题可能有两个原因。请检查线缆连接或联系 Planar 了解 更多信息。 No Signal (无信号) (无信号) (无信号) (无信号) 此信息表示液晶显示器已打开,但无法从计算机图形卡接收任何信号。请 检查所有电源开关、电源线和 VGA 信号线。 Out of Range (超出范围) (超出范围) (超出范围) (超出范围) 此信息表示计算机图形卡的信号与 LCD 显示器不兼容。当信号没有包括在 我们在本手册 “ 附录 ” 中所列的 “ 视频模...