Planar PL1910W - Manuals

Introduction Installation Features 4 Congratulations on your purchase of PL1910W, a high performance 18.5 inch wide color TFT LCD monitor. * 18.5" TFT Color LCD monitor * 16:9 Widescreen * Recommended resolution: 1366 x 768 @ 60Hz * Direct analog signal input * Direct digital signal input * Auto...

Unpacking User Guide LCD Monitor AC Power Cord 15-pin D-Sub Cable DVI Cable 5 PJ19W Please check that the following items are present when you unpack the box. We recommend you save the packaging 　 for future use.

Attaching the Base: 6 1. Lay the TFT LCD monitor on a flat surface with the LCD screen face down. To prevent the monitor from being scratched, put a soft cloth on the table. 2. Unpack the stand and attach to monitor as shown. 3. Unpack the base and attach to stand as shown.

Removing the Base 1. Lay the TFT LCD monitor on a flat surface with the LCD screen face down. To prevent the monitor from being scratched, put a soft cloth on the table. 2. 3. Press the release button on the stand while pulling away from the monitor. Press the release button on the base while pullin...

Preparing The Monitor For Wall-Mounting 1. Check the stability of the wall-mounting fixture. 2. The rear of this LCD display has 4 integrated 4 mm, 0.7 pitches threaded nuts. Use the four holes (A), (B), (C), and (D) to attach the swing arm or other mounting fixture to the back of the monitor with s...

Screen Position Adjustment In order to optimize the best viewing position, you can adjust the tilt of the monitor as shown in the figure below. 9

Display Controls Front Panel Controls Icon 1 2 3 4 5 6 Power LED Description Auto adjust screen display .Press 5 seconds to auto detect the input source or manually select the input source of VGA or DVI. Backward selection of the OSD menu. Decease the value after sub-menu selected. Forward selection...

OSD Lock Function All Lock Function OSD lock – all 4 buttons are locked except the “POWER” button. press the “Menu” and buttons to lock the OSD function. “ ” The monitor will show the “OSD Lock” or “OSD Unlock” messa The monitor will show the “All Lock” or “All Unlock” messa ge for 3 seconds and it ...

OSD H. position Adjusts the OSD menu's horizontal position. V. position Adjusts the OSD menu's vertical position. OSD Timeout Adjusts how long OSD menu remains open. Display Display Mode Expands image to full screen or 4:3. Preset Modes Selects between different preset modes. ECO If on, sets the mon...

Specifications Technical Information * All specifications are subject to change without notice. Model Name Planar PL1910W LCD Display Display Type 18.5" TFT LCD Display Area 409.8 mm(H) x 230.4 mm( V ) Input Voltage 100-240Vac Frequency F : 30-61 kHz, F : 50-75 Hz Operational Features Display Co...

Supported Timing Resolution IBM, VGA 640x480 @ 60Hz VESA 640x480 @ 72Hz VESA 640x480 @ 75Hz VGA 720x400 @ 70Hz VESA 800x600 @ 56Hz VESA 800x600 @ 60Hz VESA 800x600 @ 72Hz VESA 800x600 @ 75Hz VESA 1024x768 @ 60Hz VESA 1024x768 @ 70Hz VESA 1024x768 @ 75Hz CEA 1280x720 @ 60Hz CVT 1280x800 @ 60Hz VESA 1...

Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to (VGA Mode) Problems Current Status Remedy No Picture LED ON Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF Check the power switch. Check if ...

Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receiv e all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support /prod...