Planar ND1950 - Manuals - manualsarea.com

Page 3 - Contents

1 Contents Contents .............................................................................................................. 1 Preface ................................................................................................................ 2 Installation ..................................

Page 4 - Preface; Warning

2 Preface This manual is designed to assist users in setting up and using the Integrated Thin Client Network Display (Network Display). Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this doc...

Page 5 - Important Safety Instructions

3 Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean the Network Display screen; -- Power off the Network Display and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a soft cloth. -- Gently clea...

Page 6 - Installation; Unpacking; Desktop Installation

4 Installation Unpacking Before unpacking the Network Display, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that Network Display has enough space around it for sufficient airflow. Though the Network Display uses v...

Page 8 - Connecting User Devices; Setting Up the Network Display

6 Connecting User Devices 1. USB devices such as the Keyboard can be connected to ports on the side or bottom (See Fig. 1-6 and Figure 1-7) 2. The unit may be secured through the use of Kensington locking devices. (See Figure 1-6) 3. The Headset/Handset port (RJ22) is reserved for future use with VO...

Page 9 - Display Controls; User Controls

7 Display Controls User Controls A brief description and the location of all Network Display functions controls and indicators: 5 4 1 3 2 Figure 2-1 1 Power Control - LED Modes are changed by pressing the Power Control Button (Please refer to Figure 2-2) 2 Brightness Function / Adjust increase 3 Bri...

Page 11 - Technical Information; Specifications; Power Management

9 Technical Information Specifications LCD Panel ND1750 ND1950 Size 17" SXGA 19” SXGA Display Type Active matrix color TFT LCD Active matrix color TFT LCD Resolution 1280 x 1024 1280 x 1024 Display Dot 1280 x (RGB) x 1024 1280 x (RGB) x 1024 Aspect Ratio 5:4 5:4 Display Area , mm (H x V) 337.92 ...

Page 12 - Supported Display Resolutions

10 External Connections Power Input (DC input) DC Socket, 12V, 5A (Center Positive) GigaBit Ethernet port RJ45USB ports 4 x USB connectors, Type A Receptacles Headphone 3.5mm Stereo Jack Microphone 3.5mm Mono Jack, Pink Headset RJ22 (4P4C, Reserved for Future VOIP Software Support) Environment Opera...

Page 13 - Troubleshooting

11 Troubleshooting This Network Display has been pre-adjusted using factory standards. PROBLEM There is no image on Network Display If there’s no image on the Network Display, please perform the following steps: 1. Verify that the power cord is connected to a proper source of power. 2. Verify that t...