Pelco SB2600 - Manuals

Pelco SB2600 – Manual in PDF format online.

Manuals:

Manual

Manual Pelco SB2600

Summary

Page 2 - CONTENTS; Section; CONDUCTOR AND CABLE REQUIREMENTS (ALL MODELS

2 Pelco Manual C1402M-B (2/98) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 IMPORTANT SAFEGUARDS AND WARNINGS ............................... 5 2.0 DESCRIPTION .................................................

Page 3 - Changed manual to new format.; LIST OF TABLES

Pelco Manual C1402M-B (2/98) 3 LIST OF ILLUSTRATIONS Figure Page 1 SB2600 Wiring Diagram .................................................................... 9 2 SB2600-SL Wiring Diagram .............................................................. 10 3 SB2600SL-PP Wiring Diagram .....................

Page 5 - Please thoroughly familiarize yourself with the information; Only use replacement parts recommended by Pelco.; The product and/or manual may bear the following marks:; RISK OF

Pelco Manual C1402M-B (2/98) 5 1.0 GENERAL CAUTION: This device is designed to operate at24 volts AC power. Inputvoltage must not exceed28 volts or drop below 22volts or else DAMAGE TO T H E M O T O R S W I L LO C C U R . S h o u l d y o u n e e d t e c h n i c a l a s s i s -tance, please call (800...

Page 6 - tion, and a position feedback package for presets.

6 Pelco Manual C1402M-B (2/98) 2.0 DESCRIPTION The SB26 is a discreet surveillance, low profile, hemisphere dome for CCD typecameras designed for ease of installation, relocation, and service in fixed ceilingsor standard 2' x 2' (.61 m x .61 m) or 2' x 4' (.61 m x 1.22 m) false ceiling tiles. Thebla...

Page 7 - All of the models are listed

Pelco Manual C1402M-B (2/98) 7 2.1 MODELS SB26 Drop ceiling discreet surveillance enclosure with black opaquelower dome with 1 f-stop light loss and all aluminum back boxwhich mounts above the ceiling. (Camera mount supplied.)(UL) SB26-1 Same as SB26 except supplied with clear viewing slot forvirtua...

Page 8 - CONDUCTOR AND CABLE REQUIREMENTS; Models with PP; Calculations are based on a 10% cable loss with both motors running.; WIRING INSTRUCTIONS; The following are cable

8 Pelco Manual C1402M-B (2/98) 3.0 INSTALLATION Save the shipping box and any inserts in case the unit must be returned for credit orrepair. 3.1 CONDUCTOR AND CABLE REQUIREMENTS (ALL MODELS EXCEPT SB26) A minimum of 12 conductors plus coax is required, which includes common re-quirements for motoriz...

Page 11 - SB2600SL-PP Wiring Diagram

Pelco Manual C1402M-B (2/98) 11 Figure 3. SB2600SL-PP Wiring Diagram

Page 13 - MOUNTING INSTRUCTIONS; Hook up camera power, video, and lens with the connectors supplied.; Fixed Ceiling Mounting

Pelco Manual C1402M-B (2/98) 13 3.3 MOUNTING INSTRUCTIONS Handle the lower dome with care so as not to scratch or get fingerprints on theviewing window. Determine the type of mounting desired. The enclosure can be mounted in a fixedceiling, or completely replace a standard 2' x 2' (.61 m x .61 m) ce...

Page 14 - Dropped Ceiling Mounting with; When installing the

14 Pelco Manual C1402M-B (2/98) 3.3.2 Dropped Ceiling, Tile Replacement Mounting To mount the enclosure into a dropped ceiling grid, perform the following steps(refer to Figure 6): 1. Determine the location for mounting the enclosure and remove the appropri-ate ceiling tile. 2. Remove trim ring and ...

Page 15 - Attaching Camera/Lens to Tilt Table; R e m o v e “ s h i p p i n g

Pelco Manual C1402M-B (2/98) 15 3.3.3 Camera/Lens Installation Install the camera/lens that you have selected for use with the SB2600 Series domeas follows: 1. Loosen the 1/4-20 lens support fastener and slide lens support down (seeFigure 8). 2. Place camera/lens atop the tilt table and thread the p...

Page 16 - CONNECTOR ASSEMBLY; Prepare the wires from the conductor cable as follows:; OR; Connector Assembly

16 Pelco Manual C1402M-B (2/98) 3.4 CONNECTOR ASSEMBLY Assemble the connector parts according to the instructions below. Detail B, below,reflects the pin arrangement specific to all SB26/SB2600 Series. Refer to Figure 10during assembly. For best results use an AMP style crimper when making the wiret...

Page 17 - Installations Requiring Conduit; When conduit must be run to the enclosure back box:; or; When conduit is not required at the enclosure back box:

Pelco Manual C1402M-B (2/98) 17 3.5 J-BOX INSTALLATION For installations requiring full plenum rating, perform the following step: Installations Requiring Conduit When conduit must be run to the enclosure back box: 1. Attach the provided J-box to the top of the enclosure back box as shown inFigure 1...

Page 18 - Attachment of J-Box to Back Box for Plenum Applications

18 Pelco Manual C1402M-B (2/98) Figure 11. Attachment of J-Box to Back Box for Plenum Applications

Page 19 - Limit Stop Locations; Do

Pelco Manual C1402M-B (2/98) 19 3.6 ADJUSTMENTS To adjust the pan limits, perform the following steps. Refer to Figure 12 for limit stoplocations. Factory pan limits are set at 0-355 ° , tilt limits are set at 0-90 ° (horizontal to vertical). To adjust limit stops, perform the following steps: 1. Pa...

Page 21 - EXPLODED ASSEMBLY DIAGRAMS; SB26 Exploded Assembly Diagram

Pelco Manual C1402M-B (2/98) 21 5.0 EXPLODED ASSEMBLY DIAGRAMS Refer to Figure 13 for an exploded assembly diagram of the SB26 Enclosure, Figures 14 and 15 for the SB2600 Series Pan/Tilt, andFigure 16 for the SB26 fixed mount. Figure 13. SB26 Exploded Assembly Diagram Table A. SB26 Exploded Assembly...

Page 22 - SB2600 Series Pan/Tilt Exploded Assembly Diagram

22 Pelco Manual C1402M-B (2/98) Figure 14. SB2600 Series Pan/Tilt Exploded Assembly Diagram

Page 23 - SB2600 Series Pan/Tilt Exploded Assembly Parts List

Pelco Manual C1402M-B (2/98) 23 Table B. SB2600 Series Pan/Tilt Exploded Assembly Parts List Item No. Quantity Description Part Number 1 1 Bracket, drive mount 25004103COMP 2-4 - Not Used 5 1 Slip ring lead 28010000 Slip ring lead, preset (PP) models only 250010000 6 1 Spindle 8004024COMP 7 3 Stop, ...

Page 25 - SB2600 Hardware Exploded Assembly Diagram

Pelco Manual C1402M-B (2/98) 25 Figure 15. SB2600 Hardware Exploded Assembly Diagram

Page 26 - SB2600 Hardware Exploded Assembly Parts List

26 Pelco Manual C1402M-B (2/98) Table C. SB2600 Hardware Exploded Assembly Parts List Item No. Quantity Description Part Number A 4 Spacer, 1/4" O.D. x 1/8" L, #6 clear SPA8500 B 10 Nut, hex 6-32 SS ZH6-32NUTSH C 2 Screw, 8-32 x 3/8", hex hd, m/s, SS ZH8-32X.375HMSS D 2 Spacer 1/4" h...

Page 27 - SB26 Fixed Series Exploded Assembly Diagram

Pelco Manual C1402M-B (2/98) 27 Figure 16. SB26 Fixed Series Exploded Assembly Diagram

Page 28 - SB26 Fixed Series Exploded Assembly Mechanical Parts List

28 Pelco Manual C1402M-B (2/98) Table D. SB26 Fixed Series Exploded Assembly Mechanical Parts List Item No. Quantity Description Part Number 1 1 Bracket, drive mount, upper 25004103COMP 2 1 Adapter bracket, spindle, fixed mount 8004137COMP 3 1 Frame 14", fixed mount 8004019COMP 4 2 Bracket, dome...

Page 30 - GENERAL; Indoor

30 Pelco Manual C1402M-B (2/98) Figure 17. SB2600 Dimension Drawing GENERAL Environment: Indoor TemperatureRange: 14 ° to 122 ° F (-10 ° to 50 ° C) Dimensions: See Figure 17 Rating: NEMA 1 (Design and product specifications subject to change without notice.)

Page 31 - NOTES

Page 32 - WARRANTY AND RETURN INFORMATION; WARRANTY; RETURNS

32 Pelco Manual C1402M-B (2/98) 7.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit,Genex, Legacy, and Spectra are registeredtrademarks of Pelco.Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, w...