Pelco REL2064 - Manuals - manualsarea.com

Page 2 - CONTENTS; LIST OF ILLUSTRATIONS

2 C1518M-A (11/02) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS .................................................................................................................................................................. 3 OVERVIEW ......................................................

Page 3 - IMPORTANT SAFEGUARDS AND WARNINGS; The product and/or manual may bear the following marks:; FOR QUALIFIED SERVICE PERSONNEL ONLY; Only use replacement parts recommended by Pelco.

C1518M-A (11/02) 3 IMPORTANT SAFEGUARDS AND WARNINGS 1. Read, keep, and follow these instructions. 2. Heed all warnings. 3. There are no user-serviceable parts inside this unit. Only authorized service personnel may open the unit. 4. Installation and servicing should only be done by qualified servic...

Page 4 - Front View with Panel Removal; OVERVIEW; DESCRIPTION; Other features include the following:; FRONT VIEW

4 C1518M-A (11/02) Figure 1. Front View with Panel Removal OVERVIEW DESCRIPTION The REL2064 Relay Interface Unit provides up to 64 single-pole, single-throw (SPST) dry contact outputs for direct or automatic control ofperipheral equipment. Using Pelco’s proprietary M protocol, the relay unit communi...

Page 5 - REAR VIEW; The rear of the REL2064 unit consists of the following:

C1518M-A (11/02) 5 REAR VIEW The rear of the REL2064 unit consists of the following: 1. Four groups of 16 contact pairs, each with mating plugs for the attachment of peripheral equipment; only the group for the first 16contact pairs is shown in Figure 2 with mating plugs 2. One RS-485 output communi...

Page 6 - Rack-Mount Installation; WIRING RELAYS; Refer to Figure 5 for wiring the relays to peripheral equipment.; INSTALLATION; The following items are supplied:; MOUNTING

6 C1518M-A (11/02) Figure 3. Rack-Mount Installation WIRING RELAYS The relay unit has four groups of relay contacts. Each group represents 16 pairs of relay contacts: • Group I – 1-8, 9-16 • Group II – 17-24, 25-32 • Group III – 33-40, 41-48 • Group IV – 49-56, 57-64 Each of the four groups contains...

Page 7 - Relay Interface Contact Configuration

C1518M-A (11/02) 7 Figure 4. Relay Interface Contact Configuration 17 18 19 20 21 2 2 23 24 25 26 27 28 29 30 31 32 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 00702

Page 8 - Wiring Relays to Peripheral Equipment

8 C1518M-A (11/02) Figure 5. Wiring Relays to Peripheral Equipment 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32-122F (0-50C) + — 9 WARNING: WARNING: 00703

Page 10 - SETTING THE DIP SWITCHES; Switch 1; Switch 2; DIP Switch; Switch 3

10 C1518M-A (11/02) SETTING THE DIP SWITCHES The positioning of the DIP switches on the front of the relay unit determines how the relay unit operates. You must recycle power wheneveryou make changes to the DIP switches. 1. Remove the front panel by unscrewing the five flat-head Phillips screws. You...

Page 11 - SW2 DIP Switches

C1518M-A (11/02) 11 2. Set the DIP switches. Figure 7. SW1 DIP Switches DIAGNOSTICS:OFF LOCAL DEVICE ADDRESS ON 1 2 3 4 5 6 7 8 9 10 NOT USED:OFF DEFAULT SETTINGS: LOCAL DEVICE ADDRESS 1, DIP SWITCH 9 OFF, DIP SWITCH 10 ON 00697 NOT USED:OFF MEMORY (MEM) CONTACTS1-16: OFF OR ON17-32: OFF OR ON33-48:...

Page 12 - OPERATION; MEMORY FEATURE

12 C1518M-A (11/02) OPERATION The function of the relay unit is to operate relays to control peripheral equipment. Each relay unit processes and executes only commands withaddresses that match those of the relay units. When power is turned on, the green power LEDs on the front and back of the unit l...

Page 13 - OPERATING RELAYS FROM THE KBD960; ACTIVATING RELAYS USING F12

C1518M-A (11/02) 13 OPERATING RELAYS FROM THE KBD960 To operate relays from a KBD960 keyboard, you must know which GPI to call, and which auxiliary (AUX) to select on the keyboard. You can cascade two relay units. Each relay unit has eight GPIs. Relay Unit 1 has a GPI range of 1-8, and Relay Unit 2 ...

Page 14 - Relay Unit 1; Relay Unit 2; GPI

14 C1518M-A (11/02) Table D. Relay Unit 1 GPI Relay Contacts 1 1 2 3 4 5 6 7 8 2 9 10 11 12 13 14 15 16 3 17 18 19 20 21 22 23 24 4 25 26 27 28 29 30 31 32 5 33 34 35 36 37 38 39 40 6 41 42 43 44 45 46 47 48 7 49 50 51 52 53 54 55 56 8 57 58 59 60 61 62 63 64 Associated Aux 1 2 3 4 5 6 7 8 Table E. ...

Page 15 - Power Input Fuse Replacement; Problem; Why is the unit not operating as it should?; Solution; TROUBLESHOOTING

C1518M-A (11/02) 15 Figure 10. Power Input Fuse Replacement Problem Why were the contact positions lost whenthere was a power failure? Why is the unit not operating as it should? What is the DB9 port used for? Solution Make sure DIP switches 3-6 of SW3 are enabled so that your settings remain inmemo...

Page 16 - APPENDIX A

16 C1518M-A (11/02) DIP Switch Address 1 2 3 4 5 6 7 8 1 0 0 0 0 0 0 0 0 2 1 0 0 0 0 0 0 0 3 0 1 0 0 0 0 0 0 4 1 1 0 0 0 0 0 0 5 0 0 1 0 0 0 0 0 6 1 0 1 0 0 0 0 0 7 0 1 1 0 0 0 0 0 8 1 1 1 0 0 0 0 0 9 0 0 0 1 0 0 0 0 10 1 0 0 1 0 0 0 0 11 0 1 0 1 0 0 0 0 12 1 1 0 1 0 0 0 0 13 0 0 1 1 0 0 0 0 14 1 0 ...

Page 18 - REL2064 Dimension Diagram; SPECIFICATIONS; ELECTRICAL

18 C1518M-A (11/02) Figure 11. REL2064 Dimension Diagram 19.00 (48.26) PWR ALARM REL2064 Relay Interface Unit Made in USA 17.40 (44.20) 1.75 (4.45) 8.15 (20.70) NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES 00695 SPECIFICATIONS ELECTRICAL Input Voltage: 100-240 VAC, 50/60 Hz, au...

Page 19 - REVISION HISTORY; REGULATORY NOTICES; Reorient or relocate the receiving antenna.; WARRANTY AND RETURN INFORMATION

C1518M-A (11/02) 19 REVISION HISTORY Manual # Date Comments C1518M 5/01 Original version. C1518M-A 11/02 Updated manual to new format. Revised Table A and updated Table B. ® Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco. © Copyright 2002, Pe...