Pelco PT55OP - Manuals - manualsarea.com

Page 2 - REVISION HISTORY; Revised Figures 3 & 4 to include wiring for HB option.; CONTENTS; LIST OF ILLUSTRATIONS

2 Pelco Manual C325M-C (6/99) REVISION HISTORY Manual # Date Comments C325M-C 10/98 Changed manual to new format. Added ratings. Revisedinstallation instructions. Moved exploded assembly dia-gram, parts lists, and potentiometer adjustment to main-tenance/service manual. Reversed wire colors for pins...

Page 3 - Only use replacement parts recommended by Pelco.; The product and/or manual may bear the following marks:; RISK OF

Pelco Manual C325M-C (6/99) 3 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should beobserved. 1. Installation and...

Page 5 - When mounting the pan/; Keep a wiring diagram with the system for later use and reference.; Figure 1 . Sealant Locations

Pelco Manual C325M-C (6/99) 5 CAUTION: Pan/tilts in the PT550P Series aredesigned for upright or in-ve r t e d o p e r a t i o n a n dshould never be mountedhorizontally. NOTE: When mounting the pan/ tilt outdoors in the inverted position(base up), RTV silicone sealant,such as Dow Corning Type 732 o...

Page 6 - Table A . Maximum Cable Distances; Wire Size

6 Pelco Manual C325M-C (6/99) Table A . Maximum Cable Distances Wire Size Maximum Distance 20 AWG 635 feet (193.55 m) 18 AWG 1,015 feet (309.37 m) 16 AWG 1,610 feet (490.73 m) Distances are calculated with both motors (pan/tilt) running and assuming a 10%voltage drop in cable.

Page 7 - Figure 2. Connector Assembly; Contacts cannot be re-; OR

Pelco Manual C325M-C (6/99) 7 Figure 2. Connector Assembly 3.3.1 Mating Connector Assembly To assemble the mating connectors, refer to Figure 2 and perform the following steps. The instructions that follow apply to all AMP style connectors regardless of pin sizeor pin number. 1. Slide the connector ...

Page 10 - Figure 5. Limit Stops; LIMIT STOP ADJUSTMENTS; Loosen the pan limit stops.; Do not; remove or reposition the

10 Pelco Manual C325M-C (6/99) Figure 5. Limit Stops 3.4 LIMIT STOP ADJUSTMENTS To set pan/tilt limit stops, perform the following steps. Refer to Figure 5. 1. Loosen the pan limit stops. 2. Turn the control unit on. Pan the unit to the right until the desired right pan limitis reached. 3. Move the ...

Page 13 - TIGHTENING DRIVE CHAINS; Loosen the screws securing the motor to the mounting frame.; CHAIN DRIVE LUBRICATION; Apply additional grease if necessary.

Pelco Manual C325M-C (6/99) 13 Figure 6. Servicing the Pan/Tilt 6.0 MAINTENANCE Inspect the pan/tilt unit every six months to ensure trouble-free operation and anextended product life. Harsh environments and/or continuous motion applicationsmay require more frequent maintenance. Please read all of t...

Page 15 - Figure 7. PT550P Series Dimension Drawing; GENERAL; Aluminum plate all internal parts corrosion protected

Pelco Manual C325M-C (6/99) 15 Figure 7. PT550P Series Dimension Drawing GENERAL Construction: Aluminum plate; all internal parts corrosion protected Environment: Indoor/outdoor; completely weatherproofed Temperature: -10 ° F to 120 ° F (-23 ° C to 49 ° C) Dimensions: See Figure 7 Weight: 22 lb (9.9...

Page 16 - WARRANTY AND RETURN INFORMATION

16 Pelco Manual C325M-C (6/99) 8.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workman-ship for a period of one year after the date of shipment.Exceptions to this warranty are as noted below: • Five years on F...