Pelco PT280-24 - Manuals - manualsarea.com

Page 2 - CONTENTS; LIST OF ILLUSTRATIONS

2 Pelco Manual C324M-I (8/98) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 IMPORTANT SAFEGUARDS AND WARNINGS ............................... 5 2.0 DESCRIPTION ..................................................

Page 3 - REVISION HISTORY; Date

Pelco Manual C324M-I (8/98) 3 REVISION HISTORY Manual # Date Comments C324M 12/89 Original manual. C324M 4/90 Revision A. Manual updated with improved wiringdiagrams. C324M 7/90 Revision B. Manual revised with updated wiring diagramand corrected mechanical parts list. C324M 2/91 Revision C. Manual r...

Page 5 - Only use replacement parts recommended by Pelco.; The product and/or manual may bear the following marks:; RISK OF

Pelco Manual C324M-I (8/98) 5 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should beobserved. 1. Installation and...

Page 6 - pan rotation, 24 VAC; Agency Compliance Certification; CE Class B

6 Pelco Manual C324M-I (8/98) 2.0 DESCRIPTION The pan/tilts of the PT280-24 Series are mini-size, light duty, indoor units capableof supporting loads up to 15 pounds (6.8 kg). They operate on 24 VAC. They are factory pre-wired for pan and tilt control functions, motorized zoom lensoperation, camera ...

Page 7 - ELECTRICAL INSTALLATION

Pelco Manual C324M-I (8/98) 7 CAUTION: Pan/tilts in the PT280-24 Se-ries are for indoor use.Do not install outdoors.They are designed tooperate in an uprightor inver ted pos i t i o no n l y. D o n o t mountthe pan/tilts horizon-tally. 3.0 INSTALLATION To ensure proper wiring and operation of your e...

Page 8 - Table A. Requirements to Wire 24 VAC Power to Pan and Tilt Motors

8 Pelco Manual C324M-I (8/98) Table A. Requirements to Wire 24 VAC Power to Pan and Tilt Motors Model Wire Size Maximum Distance “A” Maximum Distance “B” Maximum Distance “B” (AWG) (5 Conductors*) (5 Conductors*) (6 Conductors**) All models 20 5,800 ft (1,768 m) *** 110 ft (33.53 m) 210 ft (64.01 m)...

Page 9 - Figure 1. Connector Assembly; Contacts cannot be re-; OR; FRONT VIEW

Pelco Manual C324M-I (8/98) 9 Figure 1. Connector Assembly 3.3.1 Mating Connector Assembly To assemble the mating connectors, refer to Figure 1 and perform the following steps. The instructions that follow apply to all AMP style connectors regardless of pin sizeor pin number. 1. Slide the connector ...

Page 11 - 8–PIN PAN/TILT SPINDLE CONNECTOR

Pelco Manual C324M-I (8/98) 11 9–PIN LENS CONNECTOR S1 S2 S3 S4 C2 C1 M1 M2 ORG VIO 8 6 3 2 4 1 7 9 5 BLK BLK GRY BLU GRN/WHT VIO/WHT RED/WHT BLK/WHT WHT/BRN WHT/RED WHT/ORG BLK GRY/WHT YEL/WHT GRN WHT WHT/YEL RED YEL P2 COAX COMMON LEFT RIGHT UP DOWN PAN PRESET TILT PRESET PRESET GND PRESET + 5V FO...

Page 13 - LIMIT STOP ADJUSTMENTS; Loosen the pan limit stops.; Figure 5. Limit Stops; Do; Do not; NOTE: COVER PLATE NOT SHOWN IN THIS ILLUSTRATION.

Pelco Manual C324M-I (8/98) 13 3.4 LIMIT STOP ADJUSTMENTS To set pan/tilt limit stops, perform the following steps. Refer to Figure 5. 1. Loosen the pan limit stops. 2. Turn on the control unit. Pan the unit to the right until the desired right pan limitis reached. 3. Move the right pan limit stop u...

Page 16 - TIGHTENING DRIVE CHAINS; Loosen the screws securing the motor to the mounting frame.; CHAIN DRIVE LUBRICATION; Apply additional grease if necessary.; Figure 6. Servicing the Pan and Tilt

16 Pelco Manual C324M-I (8/98) 6.0 MAINTENANCE Inspect the pan/tilt unit every six months to ensure trouble-free operation and anextended product life. Harsh environments and/or continuous motion applicationsmay require more frequent maintenance. Please read all of the instructions that follow befor...

Page 18 - GENERAL; Aluminum plate, all internal parts corrosion protected

18 Pelco Manual C324M-I (8/98) GENERAL Construction: Aluminum plate, all internal parts corrosion protected Environment: Indoor Temperature: 32 ° to 120 ° F (0 ° C to 49 ° C) Dimensions: See Figure 7 Weight: PT280-24P,PT280-24P/PP 9 lb (4.05 kg) PT280-24SLPT280-24SL/PP 11 lb (4.95 kg) Shipping Weigh...

Page 19 - Figure 7. PT280-24 Series Dimension Drawings

Pelco Manual C324M-I (8/98) 19 Figure 7. PT280-24 Series Dimension Drawings

Page 20 - WARRANTY AND RETURN INFORMATION

20 Pelco Manual C324M-I (8/98) 8.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workman-ship for a period of one year after the date of shipment.Exceptions to this warranty are as noted below: • Five years on F...