Pelco PT1280P - Manuals - manualsarea.com

Page 2 - CONTENTS; LIST OF ILLUSTRATIONS

2 Pelco Manual C379M-G (12/98) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 IMPORTANT SAFEGUARDS AND WARNINGS ............................... 5 2.0 DESCRIPTION .................................................

Page 3 - REVISION HISTORY; Date

Pelco Manual C379M-G (12/98) 3 REVISION HISTORY Manual # Date Comments C379M 8/87 Original version. C379M 6/90 Rev. A. New format, options edited, mounting informa-tion added, wiring diagram added. C379M 1/91 Rev. B. Wiring diagram for the PT1280P/PP added,warning section added, additional mounting ...

Page 5 - Only use replacement parts recommended by Pelco.; The product and/or manual may bear the following marks:; RISK OF

Pelco Manual C379M-G (12/98) 5 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should beobserved. 1. Installation an...

Page 7 - When mounting the pan/; Figure 1 . Sealant Locations

Pelco Manual C379M-G (12/98) 7 3.0 INSTALLATION Pan/tilts in the PT1280P Series are designed to mount onto a horizontal surface inthe upright or inverted position. In order to ensure proper wiring and system operation of all components, it is rec-ommended that you test the pan/tilt and the associate...

Page 8 - Table B. Recommended Cable Distances Using RB115 Relay Box; Wire; Simultaneous pan/tilt activation; Maximum Distance; Conductors; Table A. Maximum Cable Distances

8 Pelco Manual C379M-G (12/98) Table B. Recommended Cable Distances Using RB115 Relay Box Wire Maximum Maximum Size Distance (feet) Distance (feet) (Awg) “A” “B” 20 5,800 (1,768 m) 489 (149 m) 18 8,250 (2,515 m) 778 (237 m) 16 13,000 (3,962 m) 1,235 (376 m) REQUIRES EXTERNALPOWER SUPPLY *Using 2-wir...

Page 9 - Figure 2. Connector Assembly; OR; FRONT VIEW

Pelco Manual C379M-G (12/98) 9 3.3.1 Mating Connector Assembly To assemble the mating connector, refer to Figure 2 and perform the following steps. The instructions that follow apply to all AMP style connectors regardless of pin sizeor pin number. 1. Slide the connector clamp assembly over the condu...

Page 14 - LIMIT STOP ADJUSTMENTS; Loosen the pan limit stops.; Do not; remove or reposition the; Figure 7. Limit Stops

14 Pelco Manual C379M-G (12/98) 3.4 LIMIT STOP ADJUSTMENTS To set pan/tilt limit stops, perform the following steps. Refer to Figure 7. 1. Loosen the pan limit stops. 2. Turn the control unit on. Pan the unit to the right until the desired right panlimit is reached. 3. Move the right pan limit stop ...

Page 16 - TIGHTENING DRIVE CHAINS; Loosen the screws securing the motor to the mounting frame.; CHAIN DRIVE LUBRICATION; Apply additional grease if necessary.

16 Pelco Manual C379M-G (12/98) 6.0 MAINTENANCE Inspect the pan/tilt unit every six months to ensure trouble-free operation and anextended product life. Harsh environments and/or continuous motion applicationsmay require more frequent maintenance. Please read all of the instructions that follow befo...

Page 17 - MOTOR BRAKE REPLACEMENT; Use the knife blade to remove the worn pads, as follows:

Pelco Manual C379M-G (12/98) 17 6.3 MOTOR BRAKE REPLACEMENT To order replacement motor brakes, specify part number 1250BRAKE. The kit con-sists of four springs, four Teflon pads, two screws, and a small knife-blade for re-moving the old brake pads. 1. Remove the large rectangular heat sink from the ...

Page 19 - Figure 9. Dimension Drawing; GENERAL

Pelco Manual C379M-G (12/98) 19 Figure 9. Dimension Drawing GENERAL Dimensions: See Figure 9 Construction: Aluminum casting and plate Finish: Textured semi-gloss beige enamel Environment: Completely weatherproof for indoor/outdoor operation Temperature: -10 ° to 120 ° F (-23.33 ° to 48.89 ° C) Weigh...

Page 20 - WARRANTY AND RETURN INFORMATION

20 Pelco Manual C379M-G (12/98) 8.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workman-ship for a period of one year after the date of shipment.Exceptions to this warranty are as noted below: • Five years on ...