Page 2 - IMPORTANT SAFEGUARDS AND WARNINGS; Only use replacement parts recommended by Pelco.; DESCRIPTION; MODELS; INSTALLATION; A terminal box or
2 Pelco Manual C361M-A (8/02) IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel andconform to all local codes. 2. Installation shall be done in a...
Page 3 - PREPARE MOUNTING SURFACE; Figure 1. PS20 Surface Mount Template
Pelco Manual C361M-A (8/02) 3 PREPARE MOUNTING SURFACE 1. Determine the mounting location. Make sure the mounting surface can support fourtimes the combined weight of the scanner and the camera and lens or enclosure,camera, and lens. Refer to the manuals for your enclosure, camera, and lens for thew...
Page 4 - WIRING; Table A. Maximum Operating Distances; Model; Attachment
4 Pelco Manual C361M-A (8/02) WIRING Make electrical connections as required for scanneroperation. If required use the wire nuts (provided).Cable distances should not exceed the distancesspecified in Table A. Refer to the following wiring diagrams (Figure 3)and select the correct diagram for your in...
Page 5 - Remove the speed setting cover.; Figure 4. Scanner Adjustments and Settings
Pelco Manual C361M-A (8/02) 5 MOUNTING Attach the scanner to a flat surface or compatible wall/ceiling/pedestal mount using fourbolts (not provided). CAMERA/ENCLOSURE MOUNTING 1. Center (balance) the camera and lens, or enclosure, camera, and lens load on the tilttable. Adjust the positioning as nee...
Page 6 - LIMIT STOP ADJUSTMENT; To set pan limit stops, perform the following steps:
6 Pelco Manual C361M-A (8/02) LIMIT STOP ADJUSTMENT To set pan limit stops, perform the following steps: 1. Loosen the right and left limit stops. 2. Operate the scanner. Pan the unit to the right until the desired right pan limit isreached. 3. Move the right limit stop to the selected position and ...
Page 7 - SPECIFICATIONS; MECHANICAL
Pelco Manual C361M-A (8/02) 7 SPECIFICATIONS MECHANICAL Pan: 0-380 ° movement in horizontal plane Speed: 3 ° , 6 ° , or 12 ° per sec ± .5 ° Maximum Load: 35 lb (16 kg) centered Operation: Upright or inverted Bearings: Heavy-duty ball bearings Overload Protection: Thermal protected ELECTRICAL Input V...
Page 8 - REVISION HISTORY; WARRANTY AND RETURN INFORMATION; REGULATORY NOTICES; Reorient or relocate the receiving antenna.
8 Pelco Manual C361M-A (8/02) REVISION HISTORY Manual # Date Comments C361M 6/01 Original version. C361M-A 8/02 Revised installation instructions. Added certifications. ® Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco. © Copyright 2002, Pelco...