Page 2 - CONTENTS; Section
2 C2902M (10/02) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 3 - LIST OF ILLUSTRATIONS; Figure; LIST OF TABLES; Table
C2902M (10/02) 3 LIST OF ILLUSTRATIONS Figure Page 1 Singe-Monitor Installation (PMM15A Shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Multiple-Monitor Installation (PMM15A Shown) . . . . . . ...
Page 4 - IMPORTANT SAFEGUARDS AND WARNINGS; All operating and use instructions should be followed.; damp cloth
4 C2902M (10/02) IMPORTANT SAFEGUARDS AND WARNINGS Before installing your equipment, please read the following important safeguards as outlined by Underwriters Laboratories Inc. Read Instructions All the safety and operating instructions should be read before the appliance is operated. Retain Instru...
Page 5 - When the power-supply cord or plug is damaged.; Replacement Parts; This product has been evaluated for; INDOOR USE ONLY; unless it bears the marking; FOR USE IN WET LOCATIONS.; WARNING; The lightning flash; information on how to operate and maintain the appliance.
C2902M (10/02) 5 Object and Liquid Entry Never push objects of any kind into this CCTV product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the CCTV product. Servicing Do not attempt to...
Page 6 - DESCRIPTION; MODELS; INSTALLATION; The following parts are supplied:; MOUNTING; SINGLE-MONITOR INSTALLATION; Refer to Figure 1 and Table A for the following instructions.
6 C2902M (10/02) DESCRIPTION The PMM9A, PMM12A, PMM15A, and PMM20A are high resolution, black and white, CCTV video monitors. The cabinets aremade of steel for ruggedness and, with the exception of the picture tube, the circuitry is all solid-state for reliability. MODELS PMM9A Black and white monit...
Page 7 - MULTIPLE-MONITOR INSTALLATION; Refer to Figure 2 and Table A for the following instructions.
C2902M (10/02) 7 MULTIPLE-MONITOR INSTALLATION Refer to Figure 2 and Table A for the following instructions. 1. Connect a 75-ohm video cable from the video source, such as a camera, to the BNC connector labeled VIDEO IN (orINPUT) on the back of the first monitor. 2. Connect a 75-ohm video cable from...
Page 8 - OPERATION; LED Power Indicator; Vertical Roll
8 C2902M (10/02) OPERATION Controls are located on the front of the monitor. On the PMM9A, PMM12A, and PMM15A, some or all of the controls arebehind a hinged cover. Refer to Figure 3. Power On/Off Switch – This rocker switch turns the power on or off. Push the side with the white line to turn on the...
Page 9 - MAINTENANCE; Use a damp cloth to clean the screen.
C2902M (10/02) 9 MAINTENANCE The only maintenance required is to clean the cabinet and screen periodically. Use a damp cloth to clean the screen. Use mild soap and water to clean the cabinet. Some common household aerosol sprays, cleaning agents, solvents, or polishesmay damage the cabinet finish. D...
Page 10 - SPECIFICATIONS; ELECTRICAL
10 C2902M (10/02) SPECIFICATIONS ELECTRICAL Input Voltage: 96-256 VAC, 50/60 Hz, auto-ranging Power Consumption PMM9A: 28 W PMM12A: 30 W PMM15A: 35 W PMM20A: 48 W Input Signal: 0.5 to 2.0 Vp-p composite video Input Impedance: 75 ohms or high (switchable) Bandwidth: 100 Hz to 10 MHz Resolution: >1...
Page 11 - WARRANTY AND RETURN INFORMATION; REGULATORY NOTICES; Increase the separation between the equipment and the receiver.
C2902M (10/02) 11 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material orworkmanship for a period of one year after the date of shipment. Exceptions to this warranty areas noted below: • Five years on Pelco manufactured c...