Pelco PMC14EX - Manuals - manualsarea.com

Page 2 - CONTENTS; LIST OF ILLUSTRATIONS; Date; ii

16 Pelco Manual C929M-B (2/97) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORTANT SAFEGUARDS AND WARNINGS ............................... 1 2.0 DESCRIPTION .................................................

Page 3 - Only use replacement parts recommended by Pelco.; The product may bear the following marks:; RISK OF

Pelco Manual C929M-B (2/97) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should beobserved. 1. Installation and...

Page 4 - IMPORTANT SAFEGUARDS

2 Pelco Manual C929M-B (2/97) 1.1 IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be readbefore the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retainedfor future reference. 3. Heed Warnings - All warnings on...

Page 6 - Monitor Features; Video tape recorder input and output; OPTIONAL ACCESSORIES; Rear Panel Connectors

4 Pelco Manual C929M-B (2/97) 2.0 DESCRIPTION The PMC14E Series provides 14-inch (36 cm), color, high-resolution monitors. Monitor Features • Two video and audio input channels (one passive) with looping output. Videoinputs include connectors for either a standard composite video signal or Y/C(Super...

Page 7 - BACK PANEL CONNECTIONS; Refer to Table A for the type of video coaxial cable to use.; Camera Inputs; CAMERA ONE; Do not install; Video Coaxial Cable Wiring Distances; Cable Type; Do not connect equipment; Set the 75-ohm/HIGH switch for 75 ohms if you are using Input 1.

Pelco Manual C929M-B (2/97) 5 3.0 INSTALLATION 3.1 BACK PANEL CONNECTIONS Refer to Table A for the type of video coaxial cable to use. Refer to Figure 1 for rear panel connections. Connect equipment to the monitor as follows. There are several options for inputs 1and 2 as shown on this and the follo...

Page 8 - Figure 3; control

6 Pelco Manual C929M-B (2/97) Input 1 or 2 (Input from Switcher or Matrix Control System - VideoOnly) 1. Refer to Figure 3. Connect the video output from the video switcher or matrixcontrol equipment to Input 1 or Input 2 on the output monitor. 2. Set the 75-ohm/HIGH switch for 75 ohms if you are us...

Page 9 - Output Connections; SET FOR 75 OHMS

Pelco Manual C929M-B (2/97) 7 Input 1 (Dedicated Monitor Application - Video Only, No CameraControl) 1. Refer to Figure 5. Connect the video cable from the camera to the IN connec-tor of Input 1 on the feed monitor. Connect another video cable from the OUTconnector of the feed monitor to the video s...

Page 10 - VTR Connections; VIDEO IN

8 Pelco Manual C929M-B (2/97) VTR Connections Refer to Figure 7. Connect the video and audio connections from the monitor to avideo recorder if desired. Power Plug the appropriate end of the power cable into the AC INPUT on the monitor. Plugthe other end into a utility outlet. Figure 7. VTR Connecti...

Page 11 - FRONT PANEL CONTROLS; Set the VTR/VIDEO switch for the signal input that you are using.; Front Panel Controls

Pelco Manual C929M-B (2/97) 9 3.2 FRONT PANEL CONTROLS Refer to Figure 8. Set the controls on the front panel of the monitor as follows: 1. Set the PAL/NTSC switch for NTSC video format if you have a PMC14E moni-tor. Set the switch for PAL video format if you have a PMC14EX monitor. 2. Set the VTR/V...

Page 14 - ELECTRICAL

12 Pelco Manual C929M-B (2/97) 6.0 SPECIFICATIONS ELECTRICAL Input Power PMC14E 120 VAC, 60 Hz PMC14EX 230 VAC, 50 Hz Power Consumption PMC14E 65 W PMC14EX 70 W System PMC14E NTSC (525 lines, 60 fields per second) PMC14EX PAL (625 lines, 50 fields per second) Picture Tube: 14 inches (36 cm) measured...

Page 15 - GENERAL

Pelco Manual C929M-B (2/97) 13 GENERAL Dimensions: 13.8" W x 12.4" H x 14.6" D(35 x 31.5 x 37.1 cm) Finish: Steel cabinet painted dark gray. Black bezel around the screen. OperatingTemperature: 32 ° to 104 ° F (0 ° to 40 ° C) Humidity: 0% to 90% (non-condensing) Connectors Video Input,Ou...

Page 16 - WARRANTY AND RETURN INFORMATION; WARRANTY; RETURNS

14 Pelco Manual C929M-B (2/97) 7.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit,Genex, Legacy, and Spectra are registeredtrademarks of Pelco.Endura and ExSite are trademarks of Pelco. © Copyright 1997, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, wi...