Pelco MPT9500TDX - Manuals

Pelco MPT9500TDX – Manual in PDF format online.

Manuals:

Manual

Manual Pelco MPT9500TDX

Summary

Page 2 - CONTENTS; Section; SELECTION OF STANDARD COAXITRON

2 Pelco Manual C535M-B (8/98) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 IMPORTANT SAFEGUARDS AND WARNINGS ............................... 5 2.0 DESCRIPTION ..................................................

Page 3 - REVISION HISTORY; Date; LIST OF ILLUSTRATIONS; Figure; Multiple Camera Coaxitron

Pelco Manual C535M-B (8/98) 3 REVISION HISTORY Manual # Date Comments C535M 12/93 Original version. C535M-A 1/95 Updated manual to include preset tour programmingand other software updates. Sections 5.0 through 5.3.9are totally new material as per ECO #95-006. C535M-B 1/96 Manual updated per ECO #95...

Page 5 - Only use replacement parts recommended by Pelco.; The product and/or manual may bear the following marks:; RISK OF

Pelco Manual C535M-B (8/98) 5 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should beobserved. 1. Installation and...

Page 7 - Distance =4 dB / Loss of the Coax Cable and any Splices; “Loss of the Coax Cable

Pelco Manual C535M-B (8/98) 7 3.0 INSTALLATION 3.1 THE VIS (COAXITRON ® ) CONTROL SYSTEM The operating distance for the Vertical Interval Signaling (VIS) system is probablythe most crucial installation parameter. For a VIS control system, the maximum lossallowed across the coax is 4 dB at 1 MHz. The...

Page 8 - CONNECTING TO THE RECEIVERS; Refer to Figures 4 and 5 for additional system configurations.; RS-485 Duplex Control System (PTZ Control and Alarm Reporting)

8 Pelco Manual C535M-B (8/98) 3.3 CONNECTING TO THE RECEIVERS The rear panel view and pin out for the 6 pin modular cable is shown in Figure 3. Refer to Figures 4 and 5 for additional system configurations. Figure 2. RS-485 Duplex Control System (PTZ Control and Alarm Reporting) Figure 3. MPT9500 Re...

Page 9 - Combination Coaxitron

Pelco Manual C535M-B (8/98) 9 Figure 4. RS-485 Simplex System (PTZ Control Only) Figure 5. Combination Coaxitron ® and RS-485 (Simplex) System CX9504 CX9504 PROGRAMMING MONITOR 1 TXD (–)2 TXD (+)3 GND4 GND5 RXD (–)6 RXD (+) RXD (–)RXD (+) KEEP PARALLEL CONNECTIONSINTO RECEIVERS VERY SHORT;NO “T” CON...

Page 10 - Default keyboard display; EXT CXTRN; MPT9500 Layout of Operating Controls & Functions

10 Pelco Manual C535M-B (8/98) 4.0 OPERATION The MPT9500 operates in one of three modes: Coaxitron ® Standard (15-bit proto- col), Coaxitron ® Extended (32-bit protocol) and RS-485. Which mode is usable de- pends upon receiver configuration; however, upon power up or reset the transmitterwill wake u...

Page 11 - SELECTION OF STANDARD COAXITRON; Video must pass through; SET COM

Pelco Manual C535M-B (8/98) 11 4.1 SELECTION OF STANDARD COAXITRON ® To select the Standard Coaxitron ® mode of operation, press the number “1” key and then press the “COAX RECV” key. The default keyboard display will read “STDCXTRN”. This mode will operate the standard 15 bit Coaxitron ® receivers ...

Page 12 - and the following screen will pop up on the monitor:; Mode; In STANDARD COAXITRON; PGM LABEL

12 Pelco Manual C535M-B (8/98) Enter whatever number you desire or need and press the “PRESET SET” key. Thekeyboard display will show: and the following screen will pop up on the monitor: giving you the programming information you need to create a preset label on themonitor. At the flashing cursor p...

Page 13 - Flashing Cursor

Pelco Manual C535M-B (8/98) 13 and on the monitor the following screen will appear: NOTE: Before programming a tour for the FIRST TIME , it is recom- mended that you clear the pro-gramming area by pressing theturbo button on the joystick (seeFigure 7). F1 TO EXITJOYSTICKENTER VALUEF2 NEXT STEP 1 2 3...

Page 14 - While in; Hitting F3 PREV; PRESET TOUR

14 Pelco Manual C535M-B (8/98) NOTE & WARNING: While in t h e p r o g r a m m i n g p r e s e t t o u r smode, you may delete all previouslyprogrammed tour steps by press-ing the turbo button on the joystick(see Figure 7). Make sure you re-ally want to do this before pressingthe button. Hitting ...

Page 16 - Blinking; AUX; To deactivate an auxiliary command in Extended Coaxitron

16 Pelco Manual C535M-B (8/98) Blinking SET AUX TYPERECEIVER #JOYSTICKSELECT TO SETF1 TO EXIT AUX 1 2 3 4 5 6 7 8LATMOM ❊ ❊ ❊ ❊ ❊ ❊ ❊ ❊ → → → → where: “LAT” means latching“MOM” means momentary and 4.3.9 Programming Auxiliary Functions This feature will operate only on receivers that support this opt...

Page 17 - EDIT ZONE LABEL; This feature will operate only on receivers that support zones.; right only; to the desired end of the zone. Now enter the same; If you have entered zone

Pelco Manual C535M-B (8/98) 17 EDIT ZONE LABEL USE JOYSTICK UP DOWN CHAR SET CHAR POSITIONF1 TO SEND LABELCLEAR TO EXIT 4.3.10.2 Pattern End Point If the pattern time is less than the maximum allowed, simply end the pattern se-quence by pressing the number 2 key and then press the F1 key. This will ...

Page 18 - YEARS; and on the monitor will appear the following:

18 Pelco Manual C535M-B (8/98) YEARS ENTER YEARand PUSH SELECTF1 TO EXIT 4.3.12 Time (MPT9500TD Only) The MPT9500 is equipped with a time clock for specific functions requiring refer-ence to time and date. 4.3.12.1 Set Time (MPT9500TD Only) To set the time, press the number 1 key followed by the F2 ...

Page 19 - Operating distances are

Pelco Manual C535M-B (8/98) 19 5.0 SPECIFICATIONS ELECTRICAL Input Voltage: (50/60 Hz) 120, 230 VAC PowerConsumption: 12 watts Control Method: Coaxitron ® VIS 4-wire RS-485 StandardBaud Rates: VIS 1 MHzRS-485 2400 baud CommandError Rates: DUPLEX 0%SIMPLEX 2% Input Video Level: 0.5 to 1.5 Vp-p Operat...

Page 20 - WARRANTY AND RETURN INFORMATION; WARRANTY

20 Pelco Manual C535M-B (8/98) 6.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit,Genex, Legacy, and Spectra are registeredtrademarks of Pelco.Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, wi...