Pelco MD2001-X - Manuals - manualsarea.com

Page 2 - ii; CONTENTS; LIST OF ILLUSTRATIONS

20 Pelco Manual C616M-B (11/97) ii CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORTANT SAFEGUARDS AND WARNINGS ............................... 11.2 UNPACKING INSTRUCTIONS ...................................

Page 3 - Only use replacement parts recommended by Pelco.; The product and/or manual may bear the following marks:; RISK OF

Pelco Manual C616M-B (11/97) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should beobserved. 1. Installation an...

Page 4 - UNPACKING INSTRUCTIONS; Unpack and inspect all parts carefully.; RECOMMENDED TOOLS; Small flat blade screwdriver

2 Pelco Manual C616M-B (11/97) 1.2 UNPACKING INSTRUCTIONS Unpack and inspect all parts carefully. The following items are supplied: 1 Single Channel Analog Video Motion Detector 1 Installation/Operation Manual (C616M-B) 1 6-pin mating plug Be sure to save the shipping carton, boxes and inserts. They...

Page 5 - Single channel analog video motion detector, 120 VAC.

Pelco Manual C616M-B (11/97) 3 2.0 DESCRIPTION The MD2001 is an analog video motion detector designed to detect motion in thefield-of-view of a CCTV camera. The MD2001 utilizes solid-state circuitry and provides consistent detection levelsand high levels of noise immunity. An on-screen window define...

Page 6 - Table A. Video Coaxial Cable Wiring Distances; Maximum Distance; Refer to Table A for the

4 Pelco Manual C616M-B (11/97) 3.0 INSTALLATION Systems involving video motion detectors must use the best possible connectionand grounding practices. Poor wiring not only causes poor pictures, but could af-fect the alert function. Camera and lens selection, camera location, scene lighting,and mount...

Page 7 - RELAY CLOSURE CONNECTIONS; Do not use

Pelco Manual C616M-B (11/97) 5 3.3 RELAY CLOSURE CONNECTIONS The 6-pin connector (supplied) is used to access a SPDT relay which can be usedto activate a VCR or other devices during an alert. The relay contacts provide aclosure between pins 1 and 3 when an alert condition occurs (see Figure 2, RearP...

Page 8 - FRONT PANEL CONTROLS AND INDICATORS; Figure 1. Front Panel Controls and Indicators for the MD2001

6 Pelco Manual C616M-B (11/97) 4.0 OPERATIONS 4.1 FRONT PANEL CONTROLS AND INDICATORS Refer to Figure 1 to better understand the front panel controls and indicators. Display (ON/OFF) Activates (switch up position) or deactivates (switch downposition) display of the sensitive area window. Motion insi...

Page 9 - Power On LED (PWR) Green LED lights when power is applied to the unit.; REAR PANEL CONTROLS AND CONNECTIONS; Input power for the unit.

Pelco Manual C616M-B (11/97) 7 Sensitivity (SEN) This control adjusts the sensitivity of the detection areawindow. Clockwise rotation of a screwdriver on this controlincreases sensitivity. Visual Alert LED(ALRT) When no motion is detected, the red LED is constantly on(the ARM toggle switch is in the...

Page 10 - ON

8 Pelco Manual C616M-B (11/97) Figure 2. Rear Panel Controls and Connections Figure 3. Dip Switch Settings NOTE: Dip switch ON settings in Table B, Setup Timer Table, are in the “up” position. Table B. Setup Timer Table (Approximate Time) TIMER Switch1 Switch 2 Switch 3 1/2 second ON ON ON 2 seconds...

Page 11 - Turn all motion detector toggle switches to OFF (down position).; Figure 4. On-Screen Display of Detection Area Window

Pelco Manual C616M-B (11/97) 9 4.3 SETUP 1. Apply power to the motion detector and associated cameras, switchers, and moni-tors. It is normally better to have power to auxiliary equipment, such as VCR’s,turned off during initial setup. 2. If necessary, adjust the switcher to display the camera conne...

Page 19 - Figure 5. MD2001 Dimension Drawing; NOTE: VALUES IN PARENTHESES ARE CENTIMETERS ALL OTHERS ARE INCHES; FRONT PANEL

Pelco Manual C616M-B (11/97) 17 Figure 5. MD2001 Dimension Drawing NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES DISPLAY V H RESET ARM ON P S SEN AUTO ALRT ON PWR OFF MAN OFF P S 5.50 (13.97) 8.81 (22.38) 1.75 (4.45) FRONT PANEL REAR PANEL SIDE VIEW DISP ADJ AUTO TIME AUDIBLE 12...

Page 20 - WARRANTY AND RETURN INFORMATION; WARRANTY; RETURNS

18 Pelco Manual C616M-B (11/97) 8.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit,Genex, Legacy, and Spectra are registeredtrademarks of Pelco.Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, w...