Pelco LRD41A11 - Manuals - manualsarea.com

Page 2 - CONTENTS; Section; LIST OF ILLUSTRATIONS; Figure

2 C553M-C (3/03) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS ................................................................................................................................................................. 3 DESCRIPTION ......................................................

Page 3 - DESCRIPTION; MODELS; IMPORTANT SAFEGUARDS AND WARNINGS

C553M-C (3/03) 3 DESCRIPTION The LRD41A11 Series Legacy ® system fixed speed receiver is designed for use with Pelco’s LWM41 wall mount. Standard features include pan/tilt control, camera power, zoom lens control, wiper control, and scan capabilities. MODELS LRD41A11-1 Legacy fixed speed receiver, 1...

Page 4 - INSTALLATION; CABLE AND WIRING PREPARATION METHODS; REAR ENTRY WITHOUT CONDUIT

4 C553M-C (3/03) INSTALLATION CABLE AND WIRING PREPARATION METHODS There are four methods of installing the LWM41 wall mount. Cables can be fed directly into the rear of the LWM41 or throughthe bottom of the mount arm. Conduit plates are supplied for added flexibility of installation. A rear entry, ...

Page 5 - BOTTOM ENTRY WITH CONDUIT; INSTALLING THE SWITCH BRACKET

C553M-C (3/03) 5 BOTTOM ENTRY WITH CONDUIT 1. Install LWM41 wall mount (refer to the installation instructions supplied with the mount). 2. Remove the bottom plate of the mount arm and replace with the gland/conduit plate provided with the LRD41A11 Seriesreceiver. 3. Secure the conduit to the gland/...

Page 7 - INSTALLING THE LRD41A11 SERIES RECEIVER

C553M-C (3/03) 7 INSTALLING THE LRD41A11 SERIES RECEIVER NOTE: The LRD41A1 Series receiver accommodates an additional electrical (coax) connection to the camera for camera synchro- nization, which is necessary when multiple cameras require frame synchronization. The receiver box attaches to the insi...

Page 8 - CHANGING CAMERA VOLTAGE

8 C553M-C (3/03) CHANGING CAMERA VOLTAGE Set the camera voltage jumpers for the voltage that the camera will use. Refer to Figure 6 for the locations and settings for thejumpers. WARNING: CAMERA DAMAGE POSSIBLE. You will damage your camera if you connect it to the wrong connector on an EH4700L or EH...

Page 9 - OPERATION; CONTROL WITHOUT VIDEO; Presets

C553M-C (3/03) 9 OPERATION CONTROL WITHOUT VIDEO With this feature, the receiver can detect Coaxitron ® commands from the controller when no video signal is present. Control without video is mainly desired for the auxiliary function. NOTE: The MPT9000, and the CM8500 and CM9500 families of controlle...

Page 10 - SPECIFICATIONS; ELECTRICAL

10 C553M-C (3/03) SPECIFICATIONS ELECTRICAL Input Voltage: LRD41A11-1 Input Voltage: 120 VAC P/T Voltage: 120 VAC Camera Voltage: 24 VAC or 120 VAC (selectable) Enclosure Voltage: 120 VAC LRD41A11-2 Input Voltage: 24 VAC P/T Voltage: 24 VAC Camera Voltage: 24 VAC Enclosure Voltage: 24 VAC LRD41A11-3...

Page 11 - WARRANTY AND RETURN INFORMATION; MECHANICAL; ENVIRONMENTAL

C553M-C (3/03) 11 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material orworkmanship for a period of one year after the date of shipment. Exceptions to this warranty areas noted below: • Five years on Pelco manufactured c...