Pelco IWM24 - Manuals - manualsarea.com

Page 3 - Important Safety Instructions

C288M-G (8/05) 3 Important Safety Instructions Read these instructions. 1. Keep these instructions. 2. Heed all warnings. 3. Follow all instructions. 4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 5. Only use attachments/accessories specified by...

Page 4 - Description; MODELS

4 C288M-G (8/05) Description IWM Series wall mount is designed for Spectra ® Series pendant dome systems, and DF5 and DF8 fixed domes. The indoor/outdoor mounts can be installed directly to a wall or attached to an adapter and mounted to a corner, parapet, or pole mount. The mounts support maximum l...

Page 5 - Installation; PREPARE MOUNTING SURFACE

C288M-G (8/05) 5 Installation IWM-BK AND IWM-GY 1. Determine the mounting location. If the mount is to be attached to a corner, parapet, or pole mount adapter, install the adapter plate (refer to the instructions supplied with the adapter). If the mount is to be attached to a wall, use the base of t...

Page 6 - METHOD 1 – INSTALL A CONDUIT FITTING TO THE BOTTOM OF THE MOUNT

6 C288M-G (8/05) 2. Install the conduit fittings or glands. Refer to one of the following installation methods: METHOD 1 – INSTALL A CONDUIT FITTING TO THE BOTTOM OF THE MOUNT • Remove the 0.75-inch (1.91 cm) NPT plug. • Install a conduit fitting in the 0.75-inch NPT hole. METHOD 2 – INSTALL THE CON...

Page 7 - PULL WIRING; METHOD 1 – THROUGH CONDUIT FITTINGS TO THE BOTTOM OF THE MOUNT; ATTACH THE MOUNT TO THE SURFACE

C288M-G (8/05) 7 PULL WIRING 1. Refer to Table A and B for coaxial cable requirements and 24 VAC wiring distances. 2. Pull wiring/cabling for video and power. Refer to one of the following installation methods: METHOD 1 – THROUGH CONDUIT FITTINGS TO THE BOTTOM OF THE MOUNT If you are pulling video a...

Page 8 - INSTALL DOME

8 C288M-G (8/05) INSTALL DOME 1. Attach the dome back box to the mount and tighten the set screw. 2. Make all necessary electrical connections to dome. (Use the documentation provided with the dome.) IMPORTANT: If you are wiring more than one dome, wire the power in each dome the same way. For examp...

Page 9 - Wiring Tables; Cable Type; Maximum distance from transformer to load

C288M-G (8/05) 9 Wiring Tables Table A. Video Coaxial Cable Requirements The following are the recommended maximum distances for 24 VAC applications and are calculated with a 10 percent voltage drop. (Ten percent is generally the maximum allowable voltage drop for AC-powered devices.) Table B. 24 VA...

Page 10 - Specifications; MECHANICAL

10 C288M-G (8/05) Specifications MECHANICAL Construction Cast aluminum Finish IWM-BK, IWM24-BK Black polyester powder coat IWM-GY, IWM24-GY Gray polyester powder coat Cable Entry IWM Series Mount One 0.75-inch (1.91 cm) NPT opening on the bottom of the mount IWM24 Series Mount Two cable feedthrough ...

Page 11 - PRODUCT WARRANTY AND RETURN INFORMATION

C288M-G (8/05) 11 REVISION HISTORY Manual # Date Comments C288M – Original version. C288M-A 9/97 Completely revised. Includes IWM24 Series mounts. C288M-B 3/98 Included wiring diagram. Modified Section 3.2, step 3f. Changed manual pagination. C288M-C 5/99 Removed template. Revised Description and In...