Pelco ICS090 - Manuals - manualsarea.com

Page 2 - CONTENTS; Section; LIST OF ILLUSTRATIONS; Figure

2 C2477M (6/03) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS ..................................................................................... 3 WELCOME .......................................................................................................................................

Page 3 - IMPORTANT SAFEGUARDS AND WARNINGS

C2477M (6/03) 3 IMPORTANT SAFEGUARDS AND WARNINGS 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes. 2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and mus...

Page 4 - WELCOME; MODELS

4 C2477M (6/03) WELCOME Thank you for purchasing Pelco’s ICS090 Series Camclosure ® housing for indoor applications. The unit is easy to install and can be mounted to the surface of a ceiling/wall or recessed in a ceiling/wall. The following is supplied with the ICS090 Series housing: Qty. Descripti...

Page 5 - REMOVE THE BUBBLE; How to Remove the Bubble

C2477M (6/03) 5 REMOVE THE BUBBLE Turn the bubble counterclockwise and lift (refer to Figure 1). Place the bubble on a nonabrasivesurface. Figure 1. How to Remove the Bubble

Page 6 - Ceiling/Wall Installation; INSTALLATION TO SURFACE OF A CEILING/WALL; Concrete Ceiling/Wall Installation; INSTALL THE BACK BOX

6 C2477M (6/03) Figure 2. Ceiling/Wall Installation WALL ORCEILING 6-32 TOGGLE BOLTS(NOT SUPPLIED) BACK BOXAND SURFACE MOUNT RING INSTALLATION TO SURFACE OF A CEILING/WALL Using 6-32 toggle bolts, attach the surface mount ring and back box to the mounting surface (referto Figure 2). For a concrete c...

Page 7 - How to Remove Surface Mount Ring from Back Box; IN-CEILING INSTALLATION – SUSPENDED CEILING; Refer to Figure 4 for the following steps.; Ceiling Tile Installation

C2477M (6/03) 7 SURFACE MOUNT RING BACK BOX STANDOFF Figure 5. How to Remove Surface Mount Ring from Back Box IN-CEILING INSTALLATION – SUSPENDED CEILING Refer to Figure 4 for the following steps. 1. Remove the ceiling tile from the ceiling. 2. Cut a four-inch diameter hole in the ceiling tile. 3. R...

Page 8 - IN-CEILING INSTALLATION – FIXED CEILING/WALL; Refer to Figure 6 for the following steps.

8 C2477M (6/03) IN-CEILING INSTALLATION – FIXED CEILING/WALL Refer to Figure 6 for the following steps. 1. Cut a four-inch diameter hole in the ceiling/wall. 2. Remove the surface mount ring from the back box. Refer to Figure 5 and do the following: a. Place fingers on the circular marks located on ...

Page 9 - REINSTALL THE BUBBLE; To install the bubble refer to Figure 7 and do the following:

C2477M (6/03) 9 REINSTALL THE BUBBLE To install the bubble refer to Figure 7 and do the following: 1. Align the standoffs of the bubble with the slots of the back box. 2. Turn the bubble clockwise until it locks in place. Figure 7. How to Install the Bubble

Page 10 - SPECIFICATIONS; General

10 C2477M (6/03) SPECIFICATIONS General Construction Back Box andSurface Mount Ring: ABS plastic Bubble: Polycarbonate Finish: White Environment: Indoor Weight Unit: .52 lb (.24 kg) Shipping: 2 lb (.91 kg) (Design and product specifications subject to change without notice.) 5.30 (13.46) 1.65 (4.19)...

Page 11 - WARRANTY AND RETURN INFORMATION; REVISION HISTORY

C2477M (6/03) 11 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date ofshipment. Exceptions to this warranty are as noted below: • Five years on Pelco manufactured c...