Pelco DX9000RM - Manuals - manualsarea.com

Page 2 - CONTENTS; Section; LIST OF ILLUSTRATIONS; Figure

2 C644M (1/04) CONTENTS Section Page DESCRIPTION ..................................................................................................................................................................................................................... 3 INSTALLATION .........................

Page 3 - DESCRIPTION; DX9000 recorder with external IDE storage unit

C644M (1/04) 3 DESCRIPTION The DX9000RM-KIT allows you to upgrade DX9000 recorders and viewstations with the same RAID Manager software that isfound in DX9200 recorders and DX9100 viewstations. To perform the upgrade, you need the following: • DX9000RM-KIT • DX9000 recorder with external IDE storage...

Page 4 - INSTALLATION; Make sure the following parts are included with your kit.; BIOS CONFIGURATION PROCEDURE; This procedure allows you to boot from the CD-ROM.

4 C644M (1/04) INSTALLATION Make sure the following parts are included with your kit. 1 Viewstation Disk #1 1 Viewstation Disk #2 1 Viewstation Disk #3 1 Recorder Disk 1 Floppy Ghost Disk NOTE: You must write down your system’s name and IP address, and export all videos before starting these procedu...

Page 5 - Figure 3; . Save to CMOS Prompt

C644M (1/04) 5 3. Select Advanced BIOS Features, and then press Enter. The following screen appears. Figure 2. Advanced BIOS Features 4. Select CDROM as the First Boot Device, and then press Enter. 5. Select Floppy as the Second Boot Device, and then press Enter. 6. Select HDD-0 as the Third Boot De...

Page 6 - GHOST PROCEDURE; This procedure allows you to configure your master viewstation.; LOADING RAID MANAGER SOFTWARE; Raid Manager Folder Copy Procedure

6 C644M (1/04) GHOST PROCEDURE This procedure allows you to configure your master viewstation. 1. Close all applications on the viewstation. 2. Insert Viewstation Disk #1 (CD-DX9000RM-VS1) into the CD-ROM drive of the viewstation. 3. Go to Start > Shutdown > Restart. 4. Press Enter at the Nort...

Page 7 - and the default password is; admin

C644M (1/04) 7 3. Use pcAnywhere™ remote control software to select the recorder you wish to install the RAID Manager software on.Figure 5 shows a recorder named PELCO124. Figure 5. DX9000 Recorder 4. Click OK. The login window appears. Figure 6. Login Window 5. Enter your username and password. The...

Page 8 - viewstation name; is the; pelcovs1

8 C644M (1/04) Figure 8. Viewstation Name 9. Click OK. The login window appears. 6. Click OK. The following window appears. Figure 7. Recorder Applications 7. Close all applications on the recorder, such as the DX9000 Recording Server application and DX9000 Server Attendantapplication. 8. Go to Star...

Page 9 - Enter your username and password. The default username is

C644M (1/04) 9 10. Enter your username and password. The default username is admin and the default password is 1234 . The following window appears. Figure 9. Additional Installs Folder

Page 10 - Raid Manager Folder

10 C644M (1/04) 11. Open the Additional Installs folder on the viewstation. The following window appears. Figure 10. Raid Manager Folder

Page 11 - Raid Manager Software Copy Procedure

C644M (1/04) 11 12. Copy the RAID Manager software on the viewstation to the Additional Installs folder on the recorder. Figure 11. Raid Manager Software Copy Procedure 13. Close the network connection to the viewstation and install the Raid Manager.

Page 12 - RAID MANAGER INSTALLATION; Welcome Dialog Box

12 C644M (1/04) RAID MANAGER INSTALLATION Before you install this utility on the recorder, you must install it on the administrator viewstation. 1. Open the Additional Installs folder on the recorder. The following window appears. Figure 13. Welcome Dialog Box Figure 12. Setup Program Folder 2. Doub...

Page 16 - CONFIGURE THE RAID MANAGER SERVER; Detect Option Dialog Box

16 C644M (1/04) CONFIGURE THE RAID MANAGER SERVER 1. Go to Start > Programs > Raid Manager Utility > Raid Manager Server > Raid Manager Server. The following dialog boxappears. Figure 19. Detect Option Dialog Box 2. Verify that the process found “1 SCSI/Fiber RAID Controller.” 3. Select ...