Pelco DX9000H-C SERIES - Manuals

Page 2 - CONTENTS; LIST OF ILLUSTRATIONS

2 C685M-D (2/03) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS .................................................................................................................................................................. 3 DESCRIPTION .....................................................

Page 3 - RISK OF ELECTRIC SHOCK.; IMPORTANT SAFEGUARDS AND WARNINGS; The product and/or manual may bear the following marks:

C685M-D (2/03) 3 This symbol indicates that dangerous voltage constituting a risk ofelectric shock is present within this unit. This symbol indicates that there are important operating and mainte-nance instructions in the literature accompanying this unit. CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPE...

Page 4 - MODELS; DESCRIPTION

4 C685M-D (2/03) Figure 1. DX9000 System MODELS DX9008F-C Eight-channel digital video recorder, 30 ips for each camera, Revision C software DX9016F-C Same as DX9008F-C, except has 16 camera inputs DX9024F-C Same as DX9008F-C, except has 24 camera inputs DX9008H-C Eight-channel digital video recorder...

Page 5 - INSTALLATION; READ BEFORE BEGINNING YOUR INSTALLATION; RECORDERS AND VIDEO STORAGE UNITS

C685M-D (2/03) 5 INSTALLATION Make sure all of the supplied items are present. 1 Recorder 2 Power cords (1 USA standard and 1 European standard) 1 Patch panel1-5 BNC mounting plates1-5 37-pin connectors with 24-inch (61 cm) sets of coaxial cable and BNC connectors2-10 Screws, 6-32 x .375-inch, black...

Page 6 - MOUNTING; To install the recorder in an equipment rack:

6 C685M-D (2/03) MOUNTING CAUTION: The recorder should be installed in an air conditioned room where the temperature is maintained between 65° and 70°F (18° and 21°C) with relative humidity not to exceed 80 percent, non-condensing. The recorder should be connected to an uninterruptible power supply ...

Page 7 - CONNECTIONS; Network Connection section.; Maximum Distance; DO NOT TURN ON; These cables must hang loosely in the rack.

C685M-D (2/03) 7 CONNECTIONS Make the following connections on the rear of the recorder. Refer to Figure 3. NOTE: A mouse, keyboard, and monitor are required to configure the recorder to operate over a LAN/WAN network. After configuration, they can be left for network administration and troubleshoot...

Page 8 - DX9000 System Connections

8 C685M-D (2/03) Figure 3. DX9000 System Connections COM 2 * STORAGE UNIT #0 ** STORAGE UNIT #2 ** STORAGE UNIT #3 ** STORAGE UNIT #1 ** 37 PINCONNECTOR PATCHPANEL ETHERNET SWITCH RECORDER COM 1 * TO VIEWSTATION * COM 1 AND COM 2 ARE RESERVED FOR PELCO’S USE. ** STORAGE UNITS ARE NUMBERED AND MUST B...

Page 9 - SYSTEM CONFIGURATION; Necessary Information; Microsoft

C685M-D (2/03) 9 SYSTEM CONFIGURATION Necessary Information To configure the recorder, you will need to provide the following information. Most of the information can be obtained fromyour network administrator. • User name and company nameThey do not have to be unique. Typically both are set to the ...

Page 10 - Recorder Configuration

10 C685M-D (2/03) Figure 4. Server Configuration 1. Windows should boot up all the way to the desktop without user intervention. Close all recording applications on thedesktop. On the task bar click Start > Programs > DX9000 Server > Server Configuration Utility. 2. Ensure that the number o...

Page 12 - Enter a new recorder name in the Custom naming field and click Add.

12 C685M-D (2/03) 1. Double-click the Client Configuration Utility icon if it's on the viewstation desktop or click the Start button and go toPrograms > Viewstation > Client Configuration Utility. 2. Enter user name and password. The default is admin/admin. 3. Click Login. 4. In the Custom nam...

Page 13 - NETWORK CONNECTION; The following is required:; INSTALLATION COMPLETION

C685M-D (2/03) 13 NETWORK CONNECTION The following is required: • Dedicated LAN of four or more ViewStations requires a minimum network of 100BaseT (100 Mbit/sec) • Integration within an existing LAN/WAN requires a network of 100BaseT (100 Mbit/sec) 1. Refer to Figure 3. On the back of the recorder,...

Page 14 - SPECIFICATIONS; MECHANICAL

14 C685M-D (2/03) SPECIFICATIONS ELECTRICAL/VIDEO Input Voltage: 100-240 VAC, 50/60 Hz, auto-ranging Power Consumption: 195W maximum Signal System: NTSC/PAL Operating System: Windows 2000 and SP1 Service Pack Recording Resolution NTSC: 352 x 240 pixels PAL: 384 x 288 pixels Compression: MPEG Compres...

Page 15 - REGULATORY NOTICES; WARRANTY AND RETURN INFORMATION

C685M-D (2/03) 15 REVISION HISTORY Manual # Date Comments C685M 5/01 Original version. C685M-A 7/01 Revised the Installation and Specifications sections. C685M-B 6/02 Revised format. Updated for Version C software. C685M-C 9/02 Updated parts list on page 7. Revised Figure 2. Added Repairing the SQL ...