Pelco DD53CBW18-X - Manuals

8 C2487M-B (11/05) HOW TO OPERATE YOUR DOME SYSTEM Operation How to Control Pan and Tilt Move joystick or press the direction keys left/right and up/down. Zoom Far To zoom far, do the following: 1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit . 2. ...

C2487M-B (1 1 /05) 11 SPECTRA III LANGUAGE ENGLISH <SYSTEM INFORMATION><DISPLAY SETUP><DOME SETTINGS>ACK ALERT** EXIT RESET CAMERACYCLE CAMERA POWERREBOOT SYSTEM DOME SETTINGS <CAMERA><MOTION><POWER UP><LINE SYNC><PRESETS><PATTERNS><ZONES>&...

C2487M-B (11/05) 13 LANGUAGE The language for the on-screen menus is selectable. Available languages include English,Spanish, French, German, Italian, Portuguese, Russian, Polish, Turkish, and Czechoslovakian.The factory default language is English. NOTE: The dome system cannot store all 10 language...

14 C2487M-B (11/05) SYSTEM INFORMATION The system Information screen displays dome drive model, software version, available memory,and other diagnostic information. System settings cannot be changed using this screen. This screen is for reference only. Use the following steps to display the System I...

C2487M-B (11/05) 15 DISPLAY SETUP Display setup allows you to program how labels are displayed on the monitor. The followinglabels are available: PRESET LABEL Identifies preset. ZONE LABEL Identifies zone. ZOOM Identifies the amount of magnification. AZIMUTH 1 /ELEVATION 2 Amount of pan from 0 ° and...

16 C2487M-B (11/05) Label Position Labels can be placed anywhere on the monitor. This feature allows you to customize theappearance of your monitor screen. The following labels are not set at fixed positions: PRESET LABEL ZONE LABEL ALARM 1 ZOOM RATIO - XXX.XX AZIMUTH 1 /ELEVATION 2 - XXX ° /-XX ° D...

C2487M-B (11/05) 17 DOME SETTINGS Camera AUTO FOCUS Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions. There are two auto focus settings: ON (default) If auto focus mode is set to ON, the camera will focus automatically when using pan, tilt, and zoom functi...

18 C2487M-B (11/05) ZOOM LIMIT Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The defaultsetting is 144X. Cameras with 180X zoom (18X optical zoom and 10X digital zoom) can be set for 18X, 32X, 72X,144X, or 180X. ZOOM SPEED Zoom Speed allows the user to define how...

C2487M-B (11/05) 19 IR CUT FILTER Spectra III has two modes of operation: color, and black and white. You can increase sensitivityin low light conditions by switching to black and white mode (removing the IR cut filter). Colormode is preferred in normal lighting conditions. The following are the set...

20 C2487M-B (11/05) Advanced Camera Settings SHUTTER SPEED Shutter speed is the duration of the electronic shutter. Program shutter speed to operateautomatically (Auto) or manually (Numeric Value). AUTO (default) The electronic shutter speed is set automatically by the amount oflight sensed by the c...

C2487M-B (11/05) 21 AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changinglight conditions. Program the auto iris to operate automatically or at a user-defined level. OFF Auto iris is disabled, and control is always manual. AUTO (default) The ir...

22 C2487M-B (11/05) AUTO SHARPNESS Auto sharpness enhances picture detail by increasing the aperture gain of the camera andsharpening the edges in the picture. There are two settings: ON (default) The camera automatically maintains a normal sharpness mode. OFF The sharpness of the picture is set man...

24 C2487M-B (11/05) VIDEO LEVEL Set the video output to one of the following: NORMAL 1.0 volt peak-to-peak HIGH (default setting) 1.2 volt peak-to-peak to compensate for losses in video cable. *This setting only applies to Pressurized Spectra III domesystems with software version1.27 or higher. EXIT...

C2487M-B (11/05) 25 Motion Settings AUTO FLIP When the camera tilts downward and goes just beyond the vertical position, the dome rotates180 degrees. When the dome rotates (flips), the camera starts moving upward as long as youcontinue to hold the joystick in the down position. Once you let go of th...

26 C2487M-B (11/05) PARK TIME This feature allows the dome to begin a specified operation after a programmed time ofinactivity. Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, whichdisables this feature. The default setting is zero. Park Action This feature will ...

28 C2487M-B (11/05) LIMIT STOPS Limit stops are programmable stops that limit the pan range of the dome. There must be twolimits, a left and a right, to define an area. There are two types of limit stops: MANUAL A manual (joystick) pan operation stops when a limit stop is reached. SCAN The dome reve...

C2487M-B (11/05) 29 AZIMUTH ZERO Azimuth is the pan angle from 0 ° to 359 ° . Azimuth zero is the pan position you specify to be the 0 ° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point. To program azimuth zero: 1. ...

30 C2487M-B (11/05) Power Up POWER UP ACTION This setting defines a specific activity (scan, preset, pattern) to be performed in the event thepower to the dome is cycled. The following settings are available: NONE No action. AUTO SCAN Dome starts auto scan operation. RANDOM SCAN Dome starts random s...

C2487M-B (11/05) 31 Line Sync Line sync refers to a programmable function that allows you to synchronize all cameras within amatrix system. NOTE: Spectra III SE automatically senses V-sync input. No line sync setup is required for Pelco control systems that provide a V-sync signal. For matrix system...

34 C2487M-B (11/05) Patterns A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can berecalled with a command from a controller or automatically by a programmed function. The Spectra III can handle one user-defined pattern. Pattern length is based upon memory us...

C2487M-B (11/05) 35 Zones A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The Spectradome system is capable of eight zones, each with a 20-character label. To program a zone: 1. Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open the curs...

36 C2487M-B (11/05) Window Blanking Window blanking allows a user to program one, four-sided, user-defined area that cannot beviewed by the operator of the dome system. The blanked area will move with pan and tiltfunctions and automatically adjust in size as the lens zooms telephoto and wide. Spectr...

38 C2487M-B (11/05) REVERSE A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. The areas above and below theblanking area remain visible. Reversing the window a second time will return it to its original condition. CLEAR WINDOW All areas that have be...

C2487M-B (11/05) 39 Alarms Set the alarm contact: 1. Use the joystick to position the cursor beside ALARM CONTACT. 2. Press Iris Open. The cursor moves to the right. 3. Move the joystick up or down to view the following available selections. N/O (default) Normally openN/C Normally closed 4. Press Ir...

40 C2487M-B (11/05) Aux An auxiliary output is a programmable signal from the dome back box that can trigger anotherdevice to operate. An auxiliary output is programmable to trigger from an alarm or from acontroller. An AUX 1 command from the controller will activate the relay in the dome and operat...

C2487M-B (11/05) 41 Title Text Title text is the label used to identify the camera viewed on the monitor. Up to 20 characters canbe used for a title. To edit the title text label, do the following: 1. Use the joystick to position the cursor beside EDIT TITLE TEXT. 2. Press Iris Open. The following a...

42 C2487M-B (11/05) Alert NOTE: The Alert section only applies to Pressurized Spectra III dome systems with software version 1.27 or higher. Spectra III systems that are not pressurized or pressurized systems thatdo not have dome drive software version 1.27 or higher will not display this menu item....

C2487M-B (11/05) 43 ACK ACTION Acknowledge action programs the alert label behavior after the alert condition has beenacknowledged. The following settings are available for ACK ACTION: ALWAYS ON The alert label is displayed until alert conditions are cleared. OFF 8 HRS The alert label is turned off ...

44 C2487M-B (11/05) *This setting only applies to Pressurized Spectra III domesystems with software version1.27 or higher. Clear Use this setting to return the dome to factory default settings. EXIT SPECTRA III LANGUAGE ENGLISH <SYSTEM INFORMATION><DISPLAY SETUP><DOME SETTINGS>ACK ...

C2487M-B (11/05) 45 *This setting only applies to Pressurized Spectra III dome systems with softwareversion 1.27 or higher. (See page 11) Quick Programming Guide Password Spectra III features password protection to prevent unauthorized changes to the dome settings.An operator can open the System Inf...

46 C2487M-B (11/05) *This setting only applies to Pressurized Spectra III domesystems with software version1.27 or higher. RESET, CYCLE POWER, REBOOT RESET CAMERA Use this function to reset all camera settings to factory default parameters. CYCLE CAMERA POWER If the camera is not operating or if you...

C2487M-B (11/05) 47 SOFTWARE/LANGUAGE FILE UPLOAD The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading ofrevised operating software and language files. A Pelco field service tool is required to performthese operations. Field service tools include Pelco’s remo...

48 C2487M-B (11/05) SPECIFICATIONS DD53CBW18 Signal Format NTSC Scanning System 2:1 Interlace Image Sensor 1/4-inch CCD Effective Pixels 724 (H) X 494 (V) Horizontal Resolution >470 TV lines Lens F1.6 (f=3.8~68.4 mm optical, 18X optical zoom, 10X digital zoom) Zoom Speed (optical range) 2.9/4.2/5...

C2487M-B (11/05) 49 REGULATORY NOTICES This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may notcause harmful interference, and (2) this device must accept any interference received, including interference that may causeundesire...