Pelco C698M-A(6/04) - Manuals

Pelco C698M-A(6/04) – Manual in PDF format online.

Manuals:

Manual

Manual Pelco C698M-A(6/04)

Summary

Page 2 - CONTENTS; Section

2 C698M-A (6/04) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS ..................................................................................... 4 UNPACKING INSTRUCTIONS .................................................................................................... 4 DESCRIPTION ....

Page 3 - LIST OF ILLUSTRATIONS; Figure

C698M-A (6/04) 3 LIST OF ILLUSTRATIONS Figure Page 1 DX2000 Data Hub Front Panel .............................................................................................. 5 2 DX2000 Data Hub Rear Panel ................................................................................................

Page 4 - RISK OF ELECTRIC SHOCK.; IMPORTANT SAFEGUARDS AND WARNINGS; The product and/or manual may bear the following marks:; UNPACKING INSTRUCTIONS

4 C698M-A (6/04) This symbol indicates that dangerous voltageconstituting a risk of electric shock is presentwithin this unit. This symbol indicates that there are importantoperating and maintenance instructions in theliterature accompanying this unit. CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. I...

Page 5 - Power Indicator; Lights to indicate the data hub has power.; OUT; DESCRIPTION; DATA HUB FRONT PANEL

C698M-A (6/04) 5 POWER HUB/PORT OUT IN Tx Rx Tx Rx 1 2 3 4 5 6 7 DATA PORT Figure 1. DX2000 Data Hub Front Panel The indicators on the front panel show the following: • Power Indicator Lights to indicate the data hub has power. • HUB/PORT Indicators OUT Tx: Lights when device data or data hub status...

Page 6 - HUB IN Connector; Press this button to reset the data hub.; AC/DC Power Connector; This is used to connect to the 12V power supply.; DATA HUB REAR PANEL

6 C698M-A (6/04) DATA PORT 1 2 3 4 5 6 7 IN OUT HUB DVR/HUB RESET Use Only UL Listed Class 2 Power Supply 9-12V~ AC/DC 50/60hz Figure 2. DX2000 Data Hub Rear Panel The rear panel contains the following: • DATA PORT Input Connectors (1-7) These ATM or POS device inputs connect to DX2000 data adapter ...

Page 7 - MODELS; The following are supplied:; Qty Description

C698M-A (6/04) 7 MODELS DX2000DH DX2000 Data Hub, U.S. standard power supply (115V, 60Hz input, 12 VDCoutput to data hub) and European standard power supply (230V, 50Hz input,12 VDC output), FCC class B The following are supplied: Qty Description 1 DX2000DH 2 Mounting brackets (included for mounting...

Page 8 - SUPPORTED COMMUNICATION TYPES; Data Encoding; SETTING UP THE SYSTEM

8 C698M-A (6/04) SUPPORTED COMMUNICATION TYPES Data Encoding Data Format Baud Rate Data Bits Parity Stop Bits* Asynchronous NRZ ASCII 19200 8 None 1 SNA/SDLC NRZ EBCDIC 9600 7 Odd 2 SNA/SDLC NRZI 4800 Even 24001200 600300 * Stop bits are selected automatically. NOTE: Programming is done in the DX200...

Page 9 - INSTALLATION; Refer to the connection diagrams in the; CONNECTING POS TERMINALS TO THE DATA PORT INPUTS; SNA Network Connection

C698M-A (6/04) 9 INSTALLATION Refer to the connection diagrams in the Installation and Programming Examples section. They help illustrate and clarify the connection process. CONNECTING POS TERMINALS TO THE DATA PORT INPUTS POS terminals with RS-232 output ports are connected to the data hub using th...

Page 10 - Plug the power supply into the proper power source.; European Standard; Plug the power cord into the proper power source.

10 C698M-A (6/04) CONNECTING DAISY-CHAINED DATA HUBS Up to four data hubs can be daisy-chained together. Connect the DVR/HUB OUT port of the nextdata hub in the daisy chain (farther from the DX2000 DVR) to the HUB IN port on the data hub beinginstalled. Use straight-pinned Cat5 cable with RJ-45 conn...

Page 11 - PROGRAMMING THE DX2000 DVR FOR USE WITH A DATA HUB; OK

C698M-A (6/04) 11 PROGRAMMING THE DX2000 DVR FOR USE WITH A DATA HUB You will need to program the following settings on the DX2000 DVR configuration screens to makethe data hub work properly. Refer to the DX2000 Series Digital Video Recorder Installation/Operation Manual (C690M) for moredetailed pro...

Page 13 - INSTALLATION AND PROGRAMMING EXAMPLES; SIMPLE CONFIGURATION FOR TWO ATM OR POS DEVICES

C698M-A (6/04) 13 Figure 3. Configuration for Two Devices Figure 4. Associated Programming Configuration for Two Devices INSTALLATION AND PROGRAMMING EXAMPLES The following examples show typical installations using the DX2000DH Data Hub. The inputdevices (indicated by DATA DEVICE #) can be a POS ter...

Page 14 - MINIMUM CONFIGURATION FOR 16 ATM OR POS DEVICES; Configuration for 16 Devices

14 C698M-A (6/04) MINIMUM CONFIGURATION FOR 16 ATM OR POS DEVICES Figure 5. Configuration for 16 Devices Figure 6. Associated Programming Configuration For 16 Devices HUB# P4-1 DX2000 DVR DA TA PORTS 1 2 3 4 DATA DEVICE 16 DATA PORT 1 2 3 4 5 6 7 IN OUT HUB DVR/HUB RESET Use Only UL Listed Class 2 P...

Page 15 - MAXIMUM CONFIGURATION USING EIGHT DATA HUBS; Configuration Using Eight Data Hubs

C698M-A (6/04) 15 MAXIMUM CONFIGURATION USING EIGHT DATA HUBS Figure 7. Configuration Using Eight Data Hubs HUB# P4-1 DX2000 DVR DA TA P OR TS 1 2 3 4 DATA DEVICE 13 DATA PORT 1 2 3 4 5 6 7 IN OUT HUB DVR/HUB RESET Use Only UL Listed Class 2 Power Supply 9-12V~ AC/DC 50/60hz DATA PORT 1 2 3 4 5 6 7 ...

Page 16 - Associated Programming Configuration Using Eight Data Hubs; POWERING UP AND SYSTEM OPERATION STATUS; All data port indicators light to show a system reset occurred.

16 C698M-A (6/04) Figure 8. Associated Programming Configuration Using Eight Data Hubs POWERING UP AND SYSTEM OPERATION STATUS When you apply power to the data hub or press the reset button, the front panel indicators provideinformation about the data hub’s configuration. The information is flashed ...

Page 17 - SPECIFICATIONS; ELECTRICAL

C698M-A (6/04) 17 SPECIFICATIONS ELECTRICAL Input Power: 9-12V AC/DC, 500 mA, 3.6W Power Supply: U.S. Standard (115V, 60 Hz)European Standard (230V, 50 Hz) MECHANICAL Input/Output Connectors: RJ-45 standardPower Connector: 2.3 mm center pin, 6 mm output diameter GENERAL OperatingTemperature Range: 3...

Page 18 - REGULATORY NOTICES; • Reorient or relocate the receiving antenna.

18 C698M-A (6/04) REGULATORY NOTICES This equipment has been tested and found to comply with the limits of a Class B digital device,pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipme...

Page 19 - REVISION HISTORY

C698M-A (6/04) 19 REVISION HISTORY Manual # Date Comments C698M 6/02 Original version. C698M-A 6/04 Per CAR 040407, added material to the manual indicating that port 8004 is now the standard webservice port for the DX2000. This involves adding :8004 to the end of the IP address. ® Pelco, the Pelco l...