Pelco C689M (5/01) - Manuals

Pelco C689M (5/01) – Manual in PDF format online.

Manuals:

Manual

Manual Pelco C689M (5/01)

Summary

Page 2 - CONTENTS; Section; LIST OF ILLUSTRATIONS; Figure

2 Pelco Manual C689M (5/01) CONTENTS Section Page DESCRIPTION ................................................................................................................... 3 INSTALLATION ..............................................................................................................

Page 3 - SOFTWARE INSTALLATION; Operation is not

Pelco Manual C689M (5/01) 3 DESCRIPTION The DX3016RX Remote Viewing Software is designed for use with Microsoft Windows ® 98, Windows 2000, and Windows Me. In combination with the DX3016 Series Digital Video Re-corder (DVR) and an Ethernet LAN (local area network), the software can acquire live andr...

Page 4 - IP addresses and; NETWORK CONNECTION; Figure 1. Configuration Page

4 Pelco Manual C689M (5/01) NOTE: IP addresses and subnet masks must be setcorrectly. Do not make oralter these settings if you donot have sufficient expertiseon networks. The IP addres-ses 192.168.1.xxx (1-254)fall within the range ofprivate IP addressesprescribed for RFC1918.Please use this range ...

Page 5 - Figure 2. IP Address Page; Restart your computer.; UNINSTALLATION

Pelco Manual C689M (5/01) 5 00799 2. In the IP Address page, select Specify an IP Address and enter the IP address andsubnet mask. Click OK to complete the settings and exit the menu. Figure 2. IP Address Page 3. Restart your computer. 4. Turn on the DVR(s) and set the IP address and subnet mask for...

Page 6 - OPERATION; RESTRICTIONS; To end a viewing session, click Exit in the File menu.

6 Pelco Manual C689M (5/01) OPERATION RESTRICTIONS The playback speed of the DX3016RX is determined by the computer’s processing speed,type of playback devices used, network traffic, and other factors. For these reasons, therewill be cases where the software’s playback speed does not match the recor...

Page 7 - CONNECT TO A DVR; Figure 4. Network Window; When the software

Pelco Manual C689M (5/01) 7 CONNECT TO A DVR To connect to a DVR: 1. If the Network window is not open, click Network on the toolbar, and then click Re-corder List. The Network window appears. Figure 4. Network Window When you start the software, the Network window appears automatically if there are...

Page 8 - ADD A RECORDER; To add a recorder to the Recorder List:; Figure 6. Recorder Property Window; DISCONNECT FROM A DVR; To disconnect from a DVR:; VIEW VIDEO; Click the Live button or Playback button.; Figure 7. Camera Selection Buttons

8 Pelco Manual C689M (5/01) 00802 00785 ADD A RECORDER To add a recorder to the Recorder List: 1. Click Network on the toolbar, and then click Add Recorder. The Recorder Propertywindow appears. Figure 6. Recorder Property Window 2. Enter the DVR name and IP address in the Recorder Property window. E...

Page 9 - CUSTOM DISPLAY; Figure 8. Camera Assignment List; PLAYBACK CONTROLS; Moves to the beginning of the disk.

Pelco Manual C689M (5/01) 9 If the camera number is shown in red, it means the DVR is recording that camera. In the multiple-screen display, the camera number changes from green to yellow to indicatethe most recently updated field. Clicking the left mouse button on any camera image willchange the mu...

Page 10 - PLAYBACK; Begins playback in the forward direction.; FORWARD SEARCH; IMAGE INFORMATION; In live mode, only the camera number is displayed.; DVR INFORMATION

10 Pelco Manual C689M (5/01) PLAYBACK Begins playback in the forward direction. FORWARD SEARCH Starts search playback in the normal direction. Speed can be adjusted throughrepeated clicks of the button (1X, 2X, 4X, 8X, 1X). PLAY SPEED SLIDER Drag the slider to adjust playback speed. When set at Fast...

Page 11 - ALARM SEARCH; Click Search on the Tool bar to open the Search menu.; Figure 11. Alarm List Window; When the alarm video appears, click the Playback button.; BOOKMARKS; Figure 12. Bookmarks Menu; PLAY BACK VIDEO

Pelco Manual C689M (5/01) 11 ALARM SEARCH 1. Click Search on the Tool bar to open the Search menu. 2. Click Previous Alarm, Next Alarm, or Alarm List. If you click Alarm List, a list of alarms appears. Scroll through the list and click thealarm you want to view. This highlights your selection. Click...

Page 13 - SEQUENCE CAMERAS; Figure 13. Camera Selection List; SMOOTH THE VIDEO IMAGE; Figure 14. Time Search Dialog Boxes

Pelco Manual C689M (5/01) 13 SEQUENCE CAMERAS This option works in both the live and playback modes. To sequence all cameras: 1. Click Camera in the View menu. 2. Click All in the drop-down menu. Figure 13. Camera Selection List To sequence some cameras: 1. Hold down the Ctrl key on your keyboard. 2...

Page 14 - ZOOM; This option works in both the live and playback modes.; QUICK ZOOM; Click Quick Zoom in the View menu. A Quick Zoom window opens.; Figure 15. Quick Zoom Window; ZOOM BOX; Click the arrow in the Zoom box.; Click the right mouse

14 Pelco Manual C689M (5/01) 00800 00810 ZOOM This option works in both the live and playback modes. There are two ways to zoom. QUICK ZOOM 1. Click Quick Zoom in the View menu. A Quick Zoom window opens. Figure 15. Quick Zoom Window 2. Hold down the left mouse button and drag it to create a box aro...

Page 15 - TROUBLESHOOTING; Replace the switching hub if one is used.

Pelco Manual C689M (5/01) 15 TROUBLESHOOTING Refer to the following procedures if problems occur during network connection. 1. Confirm that the cable is physically connected. If a switching hub is used, check thatthe connection has not been made to the hub’s cascade port. Recent connectors fea-ture ...

Page 16 - REVISION HISTORY; PRODUCT WARRANTY AND RETURN INFORMATION

16 Pelco Manual C689M (5/01) ® Pelco, the Pelco logo, Spectra, Genex, Legacy, and PelcoVision are registered trademarks of Pelco. © Copyright 2001, Pelco ™ Esprit and Camclosure are trademarks of Pelco. All rights reserved. ® Windows is a registered trademark of Microsoft Corporation. ® Pentium is a...