Pelco C664M-B - Manuals - manualsarea.com

Page 2 - CONTENTS; Section; LIST OF ILLUSTRATIONS; Figure

2 C664M-B (8/02) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS .................................................................................................................................................................. 3 WELCOME .........................................................

Page 3 - RISK OF ELECTRIC SHOCK.; IMPORTANT SAFEGUARDS AND WARNINGS; Only use replacement parts recommended by Pelco.; W A R N I N G; before applying power

C664M-B (8/02) 3 C A U T I O N : RISK OF ELECTRIC SHOCK. DO NOT OPEN. IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should be done only by qualified service personnel and conform to all local ...

Page 4 - WELCOME; Qty

4 C664M-B (8/02) WELCOME Thank you for purchasing Pelco’s DX7000 Series, high-quality digital video recorder (DVR). Your new system combines thefunctions of a recorder and multiplexer into a product with versatile recording and playback functions. The following equipment is supplied with the DX7000 ...

Page 5 - Rack Ear Installation; MOUNTING; FLAT SURFACE MOUNTING; To install the unit in an equipment rack:

C664M-B (8/02) 5 Figure 1. Rack Ear Installation IMPORTANT: Slots and openings in the cabinet provide ventilation and prevent it from overheating. Do not block these openings. Never place the DVR near or over a radiator or heat register. Do not place it in a built-in installation, such as a rack,unl...

Page 6 - BACK PANEL LAYOUT; Back Panel Layout

6 C664M-B (8/02) BACK PANEL LAYOUT Figure 2. Back Panel Layout 1 Camera Inputs – 8 or 16 BNC camera inputs 2 Alarm Inputs – 8 normally closed dry contact inputs 3 Analog Monitor Output – One BNC output (sequencing only) 4 Relay Outputs – 8 normally open dry contact outputs 5 VGA Monitor Output – 15-...

Page 7 - BASIC INSTALLATION; Extended Installation; Basic Equipment Installation; before; Connect the keyboard to the bottom PS/2 input.; Maximum Distance

C664M-B (8/02) 7 BASIC INSTALLATION Basic installation covers all the equipment necessary to program and operate the system. Refer to the Extended Installation section for PTZ, alarm, sensors, and network connections. 115 230 OR DS P C olo r C CD C am era DSP Color CCD Camera 1 1 2 2 7 7 Verify that...

Page 8 - Extended Equipment Installation; EXTENDED INSTALLATION; PTZ Installation

8 C664M-B (8/02) Power Analog (spot) Monitor Network 1 1 2 2 3 3 4 4 5 5 NOTE: A standard European plug is attached to the power adapter. To convert the adapter to the USA standard loosen the Phillips head screw and remove the European plug. RX TX TX - + - RX RX TX TX + - + - RX RX TX TX + - + - PTZ...

Page 10 - SPECIFICATIONS; GENERAL

10 C664M-B (8/02) SPECIFICATIONS ELECTRICAL/VIDEO Input Voltage: 100-240 VAC switchable, 50/60 Hz Signal System: NTSC/PAL CPU and RAM DX7008: Celeron ® , 128 MB DX7016: Pentium ® III, 128 MB Resolution NTSC: 320 x 240 PAL: 384 x 288 Compression: M-JPEG Compressed Image Size: 352 x 240; average 6 KB ...

Page 11 - WARRANTY AND RETURN INFORMATION; REVISION HISTORY; REGULATORY NOTICES; Reorient or relocate the receiving antenna.

C664M-B (8/02) 11 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material orworkmanship for a period of one year after the date of shipment. Exceptions to this warranty areas noted below: • Five years on Pelco manufactured c...