Pelco C494M-E - Manuals

6 C494M-E (9/06) Installation Before installing the HS2000 to a wall, make sure that the mounting surface is able to support four times the full weight of the enclosure, camera, and lens. The tilt table and tilt table mounting brackets may be removed to provide adequate clearance for mounting the en...

C494M-E (9/06) 7 REPLACEMENT TAMPER SWITCH INSTALLATION The HS2000 enclosure comes with a tamper switch installed. If you need to install a replacement switch, refer to Figure 1 for the correct position of the switch and perform the following steps: 1. Remove the front cover. 2. Install the switch a...

8 C494M-E (9/06) Maintenance Maintenance performed at regularly scheduled intervals will help prolong the operational life and appearance of the equipment. Clean the window with a mild nonabrasive detergent in water and a soft cloth regularly to help maintain picture clarity. For a heavily soiled wi...

C494M-E (9/06) 9 Exploded Assembly Diagram Figure 2. HS2000 Exploded Assembly Diagram Table A. Mechanical Parts List Item No. Qty Description Part Number 1 Bracket, switch, break-in HS10004313COMP 1 Window, 8" x 7" x 0.25" drilled MR10 clear Lexan thermoplastic MF00-0250-001A 1 Plate, mo...

10 C494M-E (9/06) Specifications Mechanical Camera Mounting Adjustable tilt table Maximum Camera/Lens Size Accepts camera/lens combinations (including BNC connector) up to3.0" H x 3.0" W x 6.0" L (7.62 x 7.62 x 15.24 cm) Enclosure Mounting Four 0.390-inch (0.99 cm) diameter holes on prot...