Pelco C332M-D - Manuals - manualsarea.com

Page 2 - REVISION HISTORY; CONTENTS; LIST OF ILLUSTRATIONS

2 Pelco Manual C332M-D (10/98) REVISION HISTORY Manual # Date Comments C332M 9/89 Original version. C332M-A 10/91 Rev. A. Revised to include model PT573-24R/HB. C332M-B 5/95 Rev. B. Section 4.4, Connector Assembly, revised. Figures7-9 revised. to reflect new ground wire color (green). Sec-tion 6.3, ...

Page 3 - Only use replacement parts recommended by Pelco.; The product may bear the following marks:; RISK OF

Pelco Manual C332M-D (10/98) 3 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should beobserved. 1. Installation an...

Page 4 - Blanket heater in cover. Allows operation to -50; Agency Compliance Certification; Additional applicable ratings:

4 Pelco Manual C332M-D (10/98) 2.0 DESCRIPTION The PT573R and the PT573-24R are medium duty, indoor/outdoor pan/tilts de-signed for V330APT retrofit applications. Both units feature rugged worm gear finaldrives to minimize backlash and prevent wind drift, and are fully adjustable for wear. They also...

Page 5 - When mounting the pan/; Keep a wiring diagram with the system for later use and reference.; Figure 1 . Sealant Locations

Pelco Manual C332M-D (10/98) 5 NOTE: When mounting the pan/ tilt outdoors in the inverted position(base up), RTV silicone sealant,such as Dow Corning Type 732 orequivalent, should be applied to theareas indicated in Figure 1. 3.0 INSTALLATION The PT573R and PT573-24R are designed to mount onto a hor...

Page 6 - Table A. Requirements to Wire Power to Pan and Tilt Motors; Model

6 Pelco Manual C332M-D (10/98) REQUIRES EXTERNALPOWER SUPPLY Table A. Requirements to Wire Power to Pan and Tilt Motors Model Wire Size Maximum Distance "A" Maximum Distance "B" Maximum Distance "B" (AWG) (5 Conductors*) (6 Conductors**) PT573R 20 5,800 ft (1,768 m)*** 1,045 ...

Page 7 - Figure 2. Connector Assembly; Contacts cannot be re-; OR

Pelco Manual C332M-D (10/98) 7 Figure 2. Connector Assembly 3.3.1 Mating Connector Assembly To assemble the mating connectors, refer to Figure 2 and perform the following steps. The instructions that follow apply to all AMP style connectors regardless of pin sizeor pin number. 1. Slide the connector...

Page 9 - LIMIT STOP ADJUSTMENTS; Loosen the pan limit stops.; Do not; remove or reposition the

Pelco Manual C332M-D (10/98) 9 NOTE: COVER PLATE IS NOT SHOWN. 3.4 LIMIT STOP ADJUSTMENTS To set pan/tilt limit stops, perform the following steps. Refer to Figure 4. 1. Loosen the pan limit stops. 2. Turn the control unit on. Pan the unit to the right until the desired right pan limitis reached. 3....

Page 10 - Figure 5. Frame Scan Adjustment Location; FRAME SCAN ADJUSTMENT; To adjust the frame scan duration:

10 Pelco Manual C332M-D (10/98) Figure 5. Frame Scan Adjustment Location 3.5 FRAME SCAN ADJUSTMENT Frame scan duration is set at the factory for approximately four seconds. You canadjust the scan duration to operate between two and nine seconds. To adjust the frame scan duration: 1. Remove the three...

Page 13 - TIGHTENING DRIVE CHAINS; Loosen the screws securing the motor to the mounting frame.; CHAIN DRIVE LUBRICATION; Apply additional grease if necessary.

Pelco Manual C332M-D (10/98) 13 6.0 MAINTENANCE Inspect the pan/tilt unit every six months to ensure trouble-free operation and anextended product life. Harsh environments and/or continuous motion applicationsmay require more frequent maintenance. Please read all of the instructions that follow befo...

Page 15 - Amp CPC type, mate supplied; Figure 7. Dimension Drawing

Pelco Manual C332M-D (10/98) 15 Connectors: Amp CPC type, mate supplied Motors: Two-phase induction type, continuous duty, instantaneousreversing Limit Switches: Pan and tilt – 5 amp, 10 million cycle rating (external adjust-ment) ConductorRequirements: 6 (7 if two wires are used for motor common) p...

Page 16 - WARRANTY AND RETURN INFORMATION

16 Pelco Manual C332M-D (10/98) 8.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workman-ship for a period of one year after the date of shipment.Exceptions to this warranty are as noted below: • Five years on ...