Pelco C2969M-B (8/10) - Manuals

Page 3 - Contents

C2969M-B (8/10) 3 Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 4 - Product Overview

4 C2969M-B (8/10) Product Overview Figure 1. Camera Connections and Features

Page 6 - Installation; ORIENTING THE CAMERA

6 C2969M-B (8/10) Installation This guide provides instructions on installing the IE or IEE Series network dome camera in a suspended ceiling or a fixed ceiling/wall. For detailed instructions, refer to the IE Series Installation/Operation manual or the IEE Series Installation/Operation manual. Both...

Page 7 - BACK BOX AND LENS

C2969M-B (8/10) 7 BACK BOX AND LENS 1. Prepare the mounting surface: a. Cut a 6-inch diameter hole in the ceiling. b. Pull all wiring through the hole and terminate all wires (if not already terminated). 2. Install the lens on the back box: NOTE: Megapixel lenses are designed and tested to deliver o...

Page 10 - DOME LINER AND LOWER DOME INSTALLATION

10 C2969M-B (8/10) 9. Focus the lens: a. View the camera image using the service port or a Web browser. b. Press the auto back focus button once to center the focus mechanism. The button is located on the rim of the back box. c. Manually adjust the zoom and focus of the lens to the desired field of ...

Page 13 - Operation; IP ADDRESS SETTINGS

C2969M-B (8/10) 13 Operation Once the camera is installed, apply power to the camera. The camera will start a configuration sequence: the green LED flashes five times per second for approximately two minutes, and then turns solid after the boot cycle is complete and the camera is on line. IP ADDRESS...

Page 14 - IEE SERIES

14 C2969M-B (8/10) MINIMUM SYSTEM REQUIREMENTS IE SERIES Processor: Intel ® Pentium ® 4 microprocessor, 1.6 GHz Operating System: Microsoft ® Windows ® XP, Windows Vista ® , or Mac ® OS X 10.4 (or later) Memory: 512 MB RAM Network Interface Card: 100 megabits (or greater) Monitor: Minimum of 1024 x ...

Page 15 - LOGGING ON TO THE CAMERA; LIVE PAGE ICONS

C2969M-B (8/10) 15 LOGGING ON TO THE CAMERA 1. Open the Web browser. 2. Type the camera’s IP address in the browser address bar. NOTE: If you do not know the cameras IP address, you can locate it using the Pelco Device Utility software. 3. Click the Login button in the navigation bar; a dialog box a...

Page 16 - SETTINGS PAGE; SYSTEM TAB

16 C2969M-B (8/10) SETTINGS PAGE Depending on user permissions, the Settings page allows you to manage camera system settings, set up users and groups, and control the camera. To access the camera settings: 1. Log on to the camera. 2. Click the Settings link in the navigation bar located in the uppe...

Page 17 - IMAGING TAB

C2969M-B (8/10) 17 IMAGING TAB General: Includes camera orientation and digital processing settings. The orientation settings allow for standard or inverted installation of the camera. The digital processing settings adjust the sharpness, saturation, and contrast of the scene. Exposure: Adjusts scen...