Pelco C2410M-1 - Manuals - manualsarea.com

Page 3 - Important Safety Instructions; Only use replacement parts recommended by Pelco.; RISK OF ELECTRIC SHOCK.

C2410M-I (1/06) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 6. Do not install near any heat sources such...

Page 4 - Regulatory Notices; This Class A digital apparatus complies with Canadian ICES-003.; Radio And Television Interference; Reorient or relocate the receiving antenna.

4 C2410M-I (1/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesire...

Page 5 - Description; The 150 Series Camclosure

C2410M-I (1/06) 5 Description The 150 Series Camclosure ® integrated camera system is an in-ceiling dome incorporating a camera and lens package into a small, discreet, high-security enclosure designed for areas subject to heavy vandalism. The system is perfect for a variety of indoor and outdoor ap...

Page 6 - Installation; INSTALL BACK BOX; MOUNTING DIRECTLY TO A WALL OR CEILING; • For 12 VDC, connect the; Attach adapter plate to the

6 C2410M-I (1/06) Installation INSTALL BACK BOX MOUNTING DIRECTLY TO A WALL OR CEILING 1. Cut a hole 3.5 inches (9 cm) in diameter in the ceiling or wall using the adapter plate as a template. 2. Connect the video cable. 3. Connect the power wires. • For 12 VDC, connect the 24 VAC/12 VDC (red) and G...

Page 7 - Using the adapter plate as a; INSTALL CAMERA; Some indoor installations do not require a

C2410M-I (1/06) 7 MOUNTING TO CEILING TILE 1. Remove the ceiling tile. 2. Using the adapter plate as a template, cut a hole 3.5 inches (9 cm) in diameter in the ceiling tile for the back box. Punch four screw holes in the ceiling tile. 3. Attach the back box to the ceiling tile and adapter plate wit...

Page 8 - The camera bracket tab

8 C2410M-I (1/06) 3. If the heater is installed, plug the heater connector from the camera into the mating connector inside the base. Plug the video connector from the camera into the mating connector inside the base. Turn on power to the camera and monitor. 4. If you have a varifocal lens, hold the...

Page 9 - INSTALL DOME AND TRIM RING; transformer, this should solve the problem.

C2410M-I (1/06) 9 INSTALL DOME AND TRIM RING Place the trim ring and dome over the back box. If the dome has a liner, position the viewing window over the lens of the camera. Tighten the tamper-resistant screws with the supplied 1/8-inch hollow screwdriver bit. Note that the screws are installed at ...

Page 10 - AUTO IRIS LEVEL ADJUSTMENT

10 C2410M-I (1/06) AUTO IRIS LEVEL ADJUSTMENT If you have a varifocal lens or fixed focal length lens with an auto iris, you can adjust the level setting to increase or decrease brightness. FOCUS ADJUSTMENT FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS . To adjust the focus, it may be necessary to remo...

Page 12 - SWITCH SETTINGS FOR VARIFOCAL LENS; Switch Number and Position

12 C2410M-I (1/06) SWITCH SETTINGS FOR VARIFOCAL LENS The high resolution camera with varifocal lens and auto iris is confi gured at the factory for automatic exposure. For manually setting and locking the white balance, place a white background in front of camera and turn off switch 1. For gamma co...

Page 13 - Specifications; GENERAL

C2410M-I (1/06) 13 Specifications GENERAL Operating Temperature -50° to 122°F (-46° to 50°C)De-ices to 25°F (-4°C) Pan/Tilt Adjustment Manual; 360° pan; 180° tilt Construction Aluminum with steel camera mounting bracket and poly carbonate dome Finish White polyester powder coat trim ring with charco...

Page 14 - PRODUCT WARRANTY AND RETURN INFORMATION

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic...

Page 15 - REVISION HISTORY

REVISION HISTORY Manual # Date Comments C2410M 11/99 Original version. C2410M 1/00 Revised installation instructions. Added FCC notices. C2410M-A 1/00 Added varifocal lens. Changed format. C2410M-B 7/00 Added information on dome liner. C2410M-C 1/01 Added heater element caution. C2410M-D 7/01 Camera...