Pelco C1968M-A - Manuals

Pelco C1968M-A – Manual in PDF format online.

Manuals:

Manual

Manual Pelco C1968M-A

Summary

Page 2 - CONTENTS; LIST OF ILLUSTRATIONS

2 Pelco Manual C1968M-A (1/02) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS ......................................................................................................................... 3 DESCRIPTION ................................................................................

Page 3 - IMPORTANT SAFEGUARDS AND WARNINGS; Only use replacement parts recommended by Pelco.; late Federal wiretapping laws; Do not attempt to disassemble the unit.

Pelco Manual C1968M-A (1/02) 3 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. Unless the unit is specifical...

Page 4 - DESCRIPTION; FEATURES; 4-Inch Color Quad Observation System Components

4 Pelco Manual C1968M-A (1/02) DESCRIPTION FEATURES • Observe up to Four Camera Images at Once or in Sequence• Programmable Dwell Time for Each Camera During Sequence Mode• Picture-In-Picture (PIP) View in Horizontal or Vertical Format• 2X Digital Zoom and Freeze Functions• Alarm Inputs for Each Cam...

Page 5 - Examples of Camera Locations; MODELS; Additional cameras can be ordered by the following model number:

Pelco Manual C1968M-A (1/02) 5 Figure 2. Examples of Camera Locations CH 1 BACK DOOR CH 2 FRONT DOOR CH 3 STOCK ROOM CH 4 CASH CHECKOUT CH 1 CH 2 CH 3 CH 4 MODELS The 14-Inch Color Quad Observation System is available as a kit with a monitor and one camera assembly. PMCQ14KIT-A PMCQ14A 14-inch color...

Page 6 - INSTALLATION; INSTALLATION TIPS; Camera Box; INSTALLING THE MONITOR AND CAMERAS; The screws provided are intended

6 Pelco Manual C1968M-A (1/02) INSTALLATION INSTALLATION TIPS • Do not locate components or cables where they will get wet.• Lay cables loosely in attic or under floor.• Do not tightly bundle with other wires.• Avoid sharp bends in the cable. • Do not directly staple the cables to any surface. • Try...

Page 7 - Connections at the Back of the Monitor (Supplied Cameras)

Pelco Manual C1968M-A (1/02) 7 3. Run cables. Refer to Installation Tips. 4. Connect cables to cameras. Insert plug with the arrow facing up. Figure 3. Connections at the Back of the Monitor (Supplied Cameras) MAIN A/C INLET CH 1 IN IN/OUT CH 3 CH 4 CH 2 REMOTE * CH 1 CH 2 CH 3 CH 4 TRIG OUT IN OUT ...

Page 8 - Connections at the Back of the Monitor (Optional Video); Place monitor on a stable surface such as a shelf or desk top.

8 Pelco Manual C1968M-A (1/02) INSTALLING THE MONITOR WITH OTHER CAMERAS OR ALTERNATE VIDEO SOURCES Figure 4. Connections at the Back of the Monitor (Optional Video) 1. Place monitor on a stable surface such as a shelf or desk top. 2. Mount cameras or alternate video source using the appropriatemoun...

Page 9 - PROGRAMMING; Programming Menu; Menu Item; Control Locations on Front of Monitor

Pelco Manual C1968M-A (1/02) 9 PROGRAMMING Table A . Programming Menu Press ALT + MENU to toggle in or out of the programming menu. Menu Item Function Procedure [1] Change channel name that ID INPUT appears on the screen. [2] Change date and time that DATE-TIME appears on the screen. [3] Change the ...

Page 10 - CHECK OUT; Check-Out Procedure; OPERATION; DISPLAY; Display Functions

10 Pelco Manual C1968M-A (1/02) CHECK OUT Table B. Check-Out Procedure This procedure assumes that power is on. Step Procedure Results 1 Calibrate cameras. 2 Press the QUAD/MENU button. 3 Press the CH 1 button. 4 Press the CH 2 button. 5 Press the CH 3 button. 6 Press the CH 4 button. 7 Press the PI...

Page 11 - Display Selections; QUAD MODE

Pelco Manual C1968M-A (1/02) 11 Figure 6. Display Selections PIP MODE (HORZ) QUAD MODE SEQUENCE MODE PIP SEQ QUAD MENU SINGLE-CAMERA MODE CH4 VCR MENU MODE CH4 VCR CH3 ZOOM FREEZE CH2 CH1 TALK AUDIO MIC TINT SHARP COLOR BRIGHT CONTRAST VOLUME POWER PIP SEQ QUAD MENU RESET ALT PIP SEQ RESET ALT QUAD ...

Page 12 - INTERCOM; Intercom Activities on Screen; Action; Listen channel X; You can operate the intercom when the other display

12 Pelco Manual C1968M-A (1/02) INTERCOM The intercom operates with one camera at a time. When the monitor is in quad display mode, a little speaker icon appears next tothe channel number to show which camera has the intercom active. Figure 7. Intercom Activities on Screen Table D. Intercom Function...

Page 13 - ALARM; Alarm Function; Alarm occurs at a camera location.; VCR RECORD/VCR PLAYBACK; Alarm Activities on Screen

Pelco Manual C1968M-A (1/02) 13 ALARM The alarm operates with any or all cameras at once. ALM flashes at the top center of the screen and the display automaticallyswitches to show the camera that has the alarm. Table E. Alarm Function Alarm Function Action Alarm occurs at a camera location. Manually...

Page 14 - Back Panel Reference Key; Reference; Monitor Back Panel Controls and Connections

14 Pelco Manual C1968M-A (1/02) Table F. Back Panel Reference Key Reference Number Description Function 1 Power inlet 2 Main power switch 3 75-ohm/High impedance switch 4-7 Video/Audio inputs (6-Pin Mini-DIN) 8-11 Video looping output/Camera input(BNC) 12 Monitor output 13 Alarm input/output connect...

Page 15 - Front Panel Reference Key; Monitor Controls

Pelco Manual C1968M-A (1/02) 15 Table G. Front Panel Reference Key Reference Number Description Function 1 Reset/ALT key 2 Zoom/Freeze key 3 PIP/Sequence key 4 Quad/Menu key 5 Power Indicator LED 6 CH1/UP key 7 CH2/Down key 8 CH3/Left key 9 CH4/Right key/VCR 10 Talk/Audio 11 Microphone 12 Tint 13 Sh...

Page 16 - TECHNICAL SPECIFICATIONS

16 Pelco Manual C1968M-A (1/02) TECHNICAL SPECIFICATIONS ELECTRICAL Monitor Input Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 70 wattsSignal Format: NTSC Scanning System: 2:1 interlace Picture Elements: 512 (H) x 492 (V) Horizontal Resolution: 350 TV lines (center)Linearity: Less than 12% A...

Page 20 - REVISION HISTORY; Date; REGULATORY NOTICES; PRODUCT WARRANTY AND RETURN INFORMATION

20 Pelco Manual C1968M-A (1/02) Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. ©Copyright 2002, Pelco Endura and ExSite are trademarks of Pelco. All rights reserved. REVISION HISTORY Manual # Date Comments C1968M 2/00 Original version. C1968...