Page 4 - Regulatory Notices; RADIO AND TELEVISION INTERFERENCE
4 C1620M-B (9/05) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesire...
Page 5 - Description; PARTS LIST; Qty
C1620M-B (9/05) 5 Description The KBD5000 Series keyboard is the controller for Pelco’s network-based video system products. It is the point from which all user functions can be accessed. The KBD5000 Series is configured with three control modules that are installed in receptacles on the keyboard ba...
Page 6 - PACKAGE CONTENTS; PRODUCT SERIAL NUMBER LABEL; M o d e l
6 C1620M-B (9/05) PACKAGE CONTENTS When installing the KBD5000, refer to Figure 1. Figure 1. Package Components PRODUCT SERIAL NUMBER LABEL A label citing your unit’s product serial number is attached to the bottom of your KBD5000 keyboard base. Should your unit require service, the product serial n...
Page 8 - Installation; INSTALLING THE WRIST SUPPORT AND CONTROL MODULES
8 C1620M-B (9/05) Installation INSTALLING THE WRIST SUPPORT AND CONTROL MODULES The KBD5000 comes with three control modules that fit in three receptacles on the base. You can choose which module will be located in which receptacle, and each module can be rotated ±60 degrees in each receptacle. The ...
Page 9 - ROTATING THE MODULES
C1620M-B (9/05) 9 3. Refer to Figure 5. Select a module. Each receptacle on the base has an attached USB cable. Turn the module upside down. Plug the USB connector cable into the USB port on the bottom of the module. Thread the USB connector cable through the plastic strain reliefs on the module to ...
Page 11 - Operation; KEYS; Keypad
C1620M-B (9/05) 11 Operation The following is only a simple guide. For details on operating the KBD5000, refer to the Pelco VCD5000 Virtual Console Display Operation manual, C1618M. KEYS The callouts in Figure 7 correspond to the reference numbers in Table A. Figure 7. Keyboard Keys NOTE: Not all fu...
Page 13 - Troubleshooting
C1620M-B (9/05) 13 Troubleshooting If the following instructions fail to solve your problem, contact Pelco Technical Support for help at 1-800-289-9100, or 1-559-292-1981 if calling internationally. You should have the serial number from the bottom of the keyboard ready in case it is needed. Do not ...
Page 14 - Specifications; POWER SUPPLY
14 C1620M-B (9/05) Specifications POWER SUPPLY Input Voltage 100-240 VAC, 50/60 Hz Output Voltage 12 VDC Power Output 20 W Input Connector Type Universal, interchangeable Output Connector Type 2.5 mm screw-on barrel Cable Type Supplied with grounded power cord; molded connector, 3 prongs, 6 ft (1.8 ...