Pelco C1603M - Manuals

C1603M (6/04) 5 Prepare the Unit OPEN THE UNIT CHASSIS WARNING: The chassis assembly includes parts with sharp edges. To avoid injury, use caution when working in and around the DX8000’s chassis and components. 1. If the DX8000 is mounted in a rack, remove it and transport it to an area that will pr...

C1603M (6/04) 7 COMPONENT LAYOUT Figure 6 shows the location of your DX8000 Series DVR’s major components. Certain cables and components have beenomitted from the illustrations in this manual for the purpose of clarity. Figure 6. DX8000 Interior POWER SUPPLY DIMM SOCKETS (RAM) CPU VGA CARD PCI SLOT ...

8 C1603M (6/04) REMOVE THE REAR CROSS-BRACE 1. Using a Phillips-head screwdriver, remove the two flat-head screws that secure the rear cross-brace. Then liftoutthe cross-brace. Refer to Figure 7. Figure 7. Removing Rear Cross-Brace

10 C1603M (6/04) Install the DX8000-ISCI SCSI Card 1. Locate PCI Slot 1 on the system motherboard. This is the expansion slot that is closest to the system’s VGA card.Refer to Figure 9. Figure 9. Location of PCI Slot 1

14 C1603M (6/04) Reassemble the Unit 1. Replace the rear cross-brace, and secure it with the flat-head screws you set aside earlier. Refer to Figure 13. Figure 13. Replacing Front Cross-Brace