NEC XP29 Plus, XM29 Plus - Manuals

Page 2 - CAUTION; WARNING; CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO; DOC compliance Notice; Warnings and Safety Precaution

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET A...

Page 3 - AVERTISSEMENT; ATTENTION; DOC avis de conformation; Mises en garde et précautions de sécurité

MISE EN GARDE: AFIN DE REDUIRE LES RISQUES D’ELECTRO-CUTION, NE PAS DEPOSER LE COUVERCLE, ILN’Y A AUCUNE PIECE UTILISABLE A L’INTERIEURDE CET APPAREIL. NE CONFIER LES TRAVAUXD’ENTRETIEN QU’A UN PERSONNEL QUALIFIE. Ce symbole a pour but de prévenir l’utilisateur de la présenced’une tension dangereuse...

Page 4 - LIMITED WARRANTY; NEC Multimedia Monitor Products

LIMITED WARRANTY NEC Multimedia Monitor Products NEC Technologies, Inc.(hereafter NECTECH)warrants this product to be free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Parts and labor are warranted for (1) One Year and CRT’s for (1) One year from the d...

Page 5 - Part Names and Functions; CONTENTS; This manual covers both the XP

1. Introduction Introduction to the MultiSync XP29 Plus/XM29 Plus ............................................................... 1Feature Highlights ...................................................................................................................... 1 2. Part Names and Functions F...

Page 6 - Introduction; I n t r o d u c t i o n t o t h e M u l t i S y n c X P2 9 P l u s / X M 2 9 P l u s; The features you’ll enjoy include:

1 2 OSM and IPM are trademarks of NEC Technologies, Inc.I B M P C / A T , P S / 2 , V G A , S - V G A , 8 5 1 4 / A a n d X G A a r e r e g i s t e r e dtrademarks of International Business Machines Corporation.Apple and Macintosh are registered trademarks of Apple Computer,Inc.Microsoft is a regist...

Page 7 - Part Names and Functions; Rear View

Multisync PROCEED VIDEO 1 EXIT VIDEO 2 RGB 1 RGB 2 POWER /STANDBY ¥ ¥ | { Part Names and Functions 4 Rear View Front View 3 2 1 3 4 Terminal Board 1 POWER .............................. Press to turn the main power on and off when the AC power is supplied. 2 STANDBY/POWER ........ When this indicato...

Page 8 - Terminal Board

Terminal Board 5 6 A B DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT 75 HIGH INT EXT BNC IN OUT IN R L(MONO) AUDIO THROUGHPUT VIDEO 1 OUT S 1 2 3 4 5 6 7 8 ON 75 HIGH RGB1 PC / EXT CTL 75 HIGH BNC IN OUT IN R L(MONO) AUDIO VIDEO ...

Page 11 - Remote Control Unit

11 12 Remote Control Unit NOTE: When not in use the remote control unit is conveniently stowed in the holder on the rear panel. 1 POWER ON/OFF Press POWER ON to turn the monitor on when the STANDBY/POWER indicator is lit red. Press POWER OFF to turn the monitor off and the monitor will go into the s...

Page 12 - Raster Control; Visual Control

13 14 Raster Control 7 WIDTH ( + / -) Adjusts the horizontal size of the image. 8 HEIGHT ( + / -) Adjusts the vertical size of the image. 9 SIDE PIN ( + / -) Adjusts the curvature of the edges of the left and right side of the display image either inward or outward. The image should be adjusted to a...

Page 13 - Battery Installation and Replacement; Remote Control Cautions

16 15 Battery Installation and Replacement The remote control is powered by two 1.5V AA batteries. Remote Control Cautions • Do not drop or mishandle the remote control unit. • Do not get the remote control unit wet. If the remote gets wet, wipe it dry immediately. • Avoid heat and humidity. • When ...

Page 14 - Functions of DIP SW; Functions and Settings of DIP SW; OPEN

18 17 Functions of DIP SW Functions and Settings of DIP SW This DIP switch is used for Sync. Control, Intelligent Power Manager, External control, wireless control, and OSM control. To change a switch setting use a pointed object, such as a pen or pencil, to push the switch to the desired position. ...

Page 15 - Installation; Wiring Diagram; NEC IDC SERIES

HIROYUK AIZ OUT OUT OUT OUT Multisync PROCEED VIDEO 1 EXIT VIDEO 2 RGB 1 RGB 2 POWER /STANDBY ¥ ¥ | { 19 20 NOTE: The two RGB1 D-Sub 15-pin connectors here can be used to either input or output video to or from a PC or Macintosh computer. Either connector can be used for input or output, however the...

Page 16 - Connecting Your PC or Macintosh Computer; Connecting Your VCR or Laser Disc Player; Connecting Your Document Camera; Connecting Your NEC IDC Series Scan Converter

22 21 Connecting Your PC or Macintosh Computer Connecting your PC or Macintosh computer to your MultiSync XP29 Plus/ XM29 Plus via the MultiCable connection system will enable you to display your computer's screen image. All of these following display standards are supported: VGA 640 x 480 for graph...

Page 17 - Daisy-chaining Your monitors; D-Sub 15 Pin RGB Signal Composition

Pin No. 123 12131415 45678 1110 9 23 24 Daisy-chaining Your monitors The REMOTE IN/OUT terminals allow you to control monitors by one remote control. NOTE: The connection of three XP29 Plus/XM29 Plus monitors or more with THROUGH OUT (VIDEO 1 or 2) terminals may degrade image quality. To do so: When...

Page 18 - External Speaker Connections

26 25 External Speaker Connections External speakers may be connected to the monitor to reproduce sound from VIDEO 1, VIDEO 2, RGB 1 or RGB 2 signal sources. External speakers may be connected directly to the EXTERNAL SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the au...

Page 19 - Operation; Power; Degaussing

27 28 Operation Power This section describes how to select a computer or video source and how to adjust the picture and sound. General Controls Before you turn on your MultiSync XP29 Plus/XM29 Plus monitor ensure that the computer or video source is turned on. 1)To adjust: 1. Turn On The Monitor The...

Page 20 - Direct Control Screen

g. BRIGHT Press to adjust the brightness of video display. h. CONTRAST Press to adjust the contrast of video display. c. HEIGHT Press to adjust the vertical size of the image. d. SIDE PIN Press to adjust the curvature of the edges of the left and right side of the display image either inward or outw...

Page 21 - Accessing OSM; Visual Controls Group

31 32 i. NORMAL( visual) Press to reset all the stored adjustment visual data and recall the factory preset data. When a specific control is selected, this key resets the selected visual adjustments. j. MUTE Press to turn off the sound for a short period of time; press again to restore the sound. k....

Page 23 - RGB Controls Group; OSM Location/OSM Turn Off Time Control; Source Information

36 35 RGB Controls Group The RGB Controls allow you to adjust the color temperature, high contrast and the white balance for RGB input. COLOR TEMP. : Pressing + selects the color temperature: 10500 K, 9300K, 6500K or custom. HIGH CONTRAST : Pressing + or - selects one of the three modes: AUTO, MODE1...

Page 24 - Volume Control; Reset Control

38 37 Volume Control The Volume control allows you to adjust the volume. VOLUME : Pressing + or - increases or decreases the volume. NOTE: When you mutes the sound, the MUTE display appears. Reset Control The Reset control allows you to return image parameters to factory presets. All Raster Settings...

Page 25 - OSM System Control Menu

40 39 OSM windows have the following elements: Right-oriented delta symbol : indicates further choices are available. Use the up or down keys to highlight the item. Pressing proceeds to the selected control screen. Left-oriented delta symbol : indicates that you can exit the current control. Pressin...

Page 27 - PC/External Control Function; PC/External Control Port Pin Assignments; External Control

44 43 1 2 3 4 5 11 12 13 14 15 6 7 8 9 10 PC/External Control Function PC/External Control Port Pin Assignments Pin No. 1627 1112 38945 10131415 D-SUB 15pin (Input/Output) Signal Name 1 No ConnectionReceive DataNo ConnectionTransimit DataNo ConnectionClear to SendNo ConnectionRequest to SendGroundIn...

Page 28 - Command Communication Sequence; Command reference; Control Data Format

Command Communication Sequence When external equipment such as a personal computer gives the command to the XP29 Plus/XM29 Plus, the XP29 Plus/XM29 Plus returns an ACK. So make sure that the external equipment receives this ACK. The XP29 Plus/XM29 Plus returns an ACK if it has received the command c...

Page 30 - Troubleshooting

49 50 Troubleshooting Before arranging for service by the NEC Service Center, check the following to be sure repairs are needed. Problem No Picture or Sound Sound OK; poor picture with VIDEO signal input. Sound OK; poor picture with RGB signal input. Picture OK; poor or no sound. Poor sound from ext...

Page 31 - Specifications

Specifications 52 51 Video Output Terminals THROUGH OUT (Video 1, 2) 1.0Vp-p, 75 Ohms unbalanced (BNC Jack), Composite video signal, Sync-negative. THROUGH OUT (S-VIDEO 1, 2) Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative. C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level. Audio Input Terminals Le...

Page 33 - Dimensions

Multisync PROCEED VIDEO 1 EXIT VIDEO 2 RGB 1 RGB 2 POWER /STANDBY ¥ ¥ | { 21.0'' (533mm) 20.4'' (518mm) 14.94'' (379.5mm) 25.4'' (645mm) 23.27'' (591mm) Dimensions 20.4'' (518mm) 56 55

Page 34 - Input Signal Reference Chart; Timing Charts; HORIZONTAL; HORIZONTAL

57 Input Signal Reference Chart Separate Sync. Timing Charts VIDEO A B C D E O P Q R S VIDEO Sync. Polarity: Positive / Negative HORIZONTAL VERTICAL Composite Sync. A B C D E VIDEO O P Q R S VIDEO Sync. Polarity: Positive / Negative HORIZONTAL VERTICAL 58

Page 35 - Recommended Sync Signal Timing

Composite Sync. & Video (Sync. on Green) Recommended Sync Signal Timing Horizontal Duty should be 3 to 30%. Horizontal sync width should exceed 0.9 µ sec. Horizontal back porch should exceed 2.0 µ sec at sync on green and 1.2 µ sec at others except when at 15KHz. Horizontal blanking should excee...

Page 36 - Typical Input Signal Timing

Typical Input Signal Timing Resolution Horizontal Frequency (A) Horizontal Period (B) Horizontal Pulse Width (C) Horizontal Back Porch (D) Horizontal Active Area (E) Hrizontal Front Porch 640 ~ 350 31.469KHz 31.778 µ sec 3.813 µ sec 1.589 µ sec 26.058 µ sec 0.318 µ sec 720 ~ 400 31.469KHz 31.778 µ s...

Page 38 - Signal Identification for Raster Preset

66 65 NOTE:L=NEG.SYNCH=POS.SYNC"-" or "()" =ignoredFactory:12 (9 preset for XM29 Plus)User:25 (22 preset for XM29 Plus)The modes 11(VESA 1024x768 and MAC 1152x870) and 12 to 15 apply to XP29 Plus only. - - - - - - - - - - - - - - - - - - - - YES-1 YES-2 YES-3 - - - - - - - YES-4 YES-...

Page 39 - Eligibility/Return for Exchange Procedure; Service and Support Policies; DOA Policy

67 Eligibility/Return for Exchange Procedure If a product is suspected of being DOA, customers must call NECTECH VSD Technical Support. A representative will assist in making the product fully functional or verify it as a DOA. VSD Technical Support 1-800-836-0655 NEC technical support will provide a...