NEC P521 - Manuals

English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing coversmay expose you to dangerous shock hazards or other risks.Refer all servicing...

English-4 Contents Power Cord* 1 Setup Manual Clamp x 3 Your new MultiSync monitor box* should contain the following: • LCD monitor • Power cord* 1 • Video Signal Cable • Wireless Remote Control and AA Batteries • Setup Manual • Cable cover • Clamp x 3 • Screw (M4 x 10) x 9 • CD-ROM • Thumbscrew for...

English-5 English This device cannot be used or installed without the TabletopStand or other mounting accessory for support. For properinstallation it is strongly recommended to use a trained,NEC authorized service person. Failure to follow NECstandard mounting procedures could result in damage to t...

English-6 Attaching Mounting Accessories The display is designed for use with the VESA mountingsystem. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attachingaccessories. Mounting accessories can be attached with the monitor inthe face down position. To avoid damaging the s...

English-7 English EXIT button Activates the OSD menu when the OSD menu is turned-off.Acts as EXIT button within the OSD to move to previousmenu. Remote control sensor and Power Indicator Receives the signal from the remote control (when using thewireless remote control). See also page 11.Glows green...

English-8 Terminal Panel Out In Out In R G B H V RGB/HV R G B H V DVD/HD2 Pr Y Pb VIDEO2 VIDEO VIDEO IN connector (BNC and RCA) To input a composite video signal. BNC and RCA connectorsare not available at the same time (Use only one input). VIDEO OUT connector (BNC) To output the composite video si...

English-10 POWER button Switches the power on/standby. INPUT button Selects input signal. DVI: DVIDISPLAYPORT: DPORTVGA: VGARGB/HV: RGB/HVHDMI: HDMIDVD/HD: DVD/HD1, DVD/HD2, SCARTVIDEO: VIDEO1, VIDEO2S-VIDEO: S-VIDEOOPTION: Depends on your connection PICTURE MODE button Selects picture mode, [HIGHBR...

English-11 English Operating Range for the RemoteControl Point the top of the remote control toward the LCD monitor’sremote sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.)from remote control sensor or at a horizontal and verticalangle of within 30° with...

English-12 1. Determine the installation location CAUTION: Installing your LCD display must be done by aqualified technician. Contact your dealer formore information. CAUTION: MOVING OR INSTALLING THE LCD MONITORMUST BE DONE BY TWO OR MORE PEOPLE(P401/P461), BY FOUR OR MORE PEOPLE(P521). Failure to ...

English-14 Connections NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in aloss of the monitor image. NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. Before mak...

English-15 English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image.Some video cards with a pixel clock over 162MHz may not display an image correctly.Your LCD monitor displays proper image by adjusting the factory pr...

English-16 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or thePower Button on the ...

English-17 English NORMAL: Displays the aspect ratio the same as it is sent from the source. FULL: Fills entire screen. WIDE: Expands a 16:9 letter box signal to fill entire screen. ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entire screen with non-linearity. Some of the outside image areawil...

English-18 BRIGHTNESS level setfor the monitor to usewhen ambient lightinglevel is low. BRIGHTNESS level set for themonitor to use when ambientlighting level is high. BRIGHTNESS range IN DARK: BRIGHTNESS level set for the monitor to use when ambient lighting level is low. IN BRIGHT: BRIGHTNESS level...

English-19 English OSD (On-Screen-Display) Controls Press UP or DOWNbutton to selectsub-menu. Press SET. Press UP or DOWN,PLUS or MINUS to selectthe function or setting tobe adjusted. Press MENU or EXIT. Remote Control Press UP or DOWNbutton to select. Press INPUT buttonto decide. Press UP or DOWN, ...

English-20 Setting Default BRIGHTNESS Adjusts the overall image and background brightness. Press + or - to adjust. 70 Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot changed. CONTRAST Adjusts the image brightness in relationship to the background. Press + or - to ad...

English-21 English H RESOLUTION Adjusts the horizontal size of the image. - VGA, RGB/HV inputs only V RESOLUTION Adjusts the vertical size of the image. - VGA, RGB/HV inputs only INPUT RESOLUTION If there is a problem with signal detection, this function forces the monitor to display the AUTO VGA, R...

English-22 SCHEDULE RESET Resets the following settings within the SCHEDULE menu back to factory setting: - OFF TIMER, SCHEDULE SETTINGS. KEEP PIP MODE Allows the monitor to remain in “PIP” and “TEXT TICKER” mode after powering off. OFF When Power is returned, PIP and TEXT TICKER appear without havi...

English-23 English MONITOR INFORMATION Monitor Information. - CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving calculation is based on the OECD (2008 Edition). OSD TRANSPARENCY Set the transparency level of the OSD. TYPE2 OFF TYP...

English-24 POWER SAVE Sets how long the monitor waits to go into power save mode after a lost signal. ON All inputs except for TV* Note: When connecting DVI, video card might not stop sending digital data even if image hasdisappeared. In this case the monitor does not get to power management mode. S...

English-26 NOTE 1: CREATING A SCHEDULE The schedule function allows the display to be set to power on and off at different times. Up to seven different schedules can beprogrammed. To program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons. Press th...

English-27 English REMOTE CONTROL ID FUNCTION REMOTE CONTROL ID The remote control can be used to control up to 100 individual MultiSync monitors usingwhat is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID modeworks in conjunction with the Monitor ID, allowing control of up to 100 individu...

English-29 English This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C” (See page 23). Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between in...

English-30 Connecting to a Network Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. NOTE: When you use this function, EXTERNAL CONTROL should be “LAN” (See page 23). To use a LAN connection, you are required to assign an IP ad...

English-31 English Preparation Before Use Connect the monitor to a commercially available LAN cable before engaging in browser operations. Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the settingmethod. Although the type of proxy ser...

English-32 Alert Mail Setting http://<the Monitor’s IP address>/lanconfig.html Type in the hostname of the network connected to the monitor.Up to 60 alphanumeric characters can be used. Type in the domain name of the network connected to the monitor.Up to 60 alphanumeric characters can be used...

English-33 English Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. ...

English-34 No picture • The signal cable should be completely connected to thedisplay card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch shouldbe in the ON position. • Check to make sure that a supported mode has beenselected on ...

English-35 English Specifications - P401 Product Specifications LCD Module 40" /101.6 cm diagonal Pixel Pitch: 0.461 mm Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video card used) Brightness: 650 cd/m 2 (Max.), 500 cd/m 2 (Typ.) @25°C Contrast Ratio: 3000:1 Viewing Angle...

English-36 Specifications - P461 Product Specifications LCD Module 46" /116.8 cm diagonal Pixel Pitch: 0.530 mm Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video card used) Brightness: 650 cd/m 2 (Max.), 500 cd/m 2 (Typ.) @25°C Contrast Ratio: 4000:1 Viewing Angle: 89° (t...

English-37 English Specifications - P521 Product Specifications LCD Module 52" /132.1 cm diagonal Pixel Pitch: 0.6 mm Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video card used) Brightness: 700 cd/m 2 (Max.), 500 cd/m 2 (Typ.) @25°C Contrast Ratio: 2000:1 Viewing Angle: ...

English-38 1) RS-232C input/output Pin No Name 1 connected to 7&8 2 RXD 3 TXD 4 connected to 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC 1 6 5 9 D-SUB 9P This LCD monitor uses RXD, TXD and GND lines for RS-232C control. 2) REMOTE IN Pin Assignment 3) REMOTE OUT Do...

English-39 English NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help de...