NEC NLT-17WF - Manuals - manualsarea.com

Page 2 - Warnings; Service; Contents

Warnings 4 Service Never remove the back cover of the TV, this can expose you to high voltage andother hazards. If the TV does not operate properly, unplug it and call your nearestNEC Service Centre.Connect the antenna cable to the connection marked Ant. (on the rear). For bestreception, use an outd...

Page 3 - Supplied Accessories; Controls

6 Supplied Accessories L Make Sure the following accessories are provided with Product. 1. AC/DC adaptor 3. Remote controller 5. Owner’s manual 6. PC IN cable 7. PC Audio IN cable 4. Batteries (type AAA) 2. AC Cord TV/AV I/II LIST SLEEP Q.VIEW MENU PC/ * PSM SSM ARC/ * REVEAL TEXT MIX SIZE HOLD INDE...

Page 4 - Remote controller; xy; Battery installation; Ïq; TELETEXT buttons

22 Controls All the functions can be controlled with the remote controller. Some functions canalso be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby ...

Page 5 - Basic Operation; On Screen Menus and Displays

22 Turning the TV On and Off Standby Setup: The AC-DC adapter and the AC power cordmust be set up and connected to have the TV in standby modeready to be turned on. Press the ON/OFF button on the side panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the POWER button on...

Page 6 - Auto Programme; Setting up TV Programme; Manual Programme

Setting up TV Programme Once you have preset the programmes, you will be able touse the PR xy or NUMBER buttons to scan the programmes you programmed.Programmes can be tuned using automatic or manualmodes. Auto Programme All programmes that can be received are stored by thismethod. It is recommended...

Page 7 - Picture Control; Auto Picture Control; Dynamic; Manual Picture Control

Setting up TV Programme Deleting a programme 1. Select a programme to be deleted with the PR xy or VOL Ïq button. 2. Press the RED button once. The selected programme is deleted, all the following programme is shifted up one position. Naming a programme 1. Select a programme to be named with the PR ...

Page 8 - Sound Control; Auto Sound Control; Flat

Sound Control You can select your preferred sound setting; Flat , Music , Movie or Speech . You can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level evenif you change programmes. 1. Press the MENU button. 2. Select t...

Page 9 - Other functions

18 Other functions You can control other functions; Clock , Blue Back , Auto Sleep , Childlock , Radio , ARC and SLEEP TIMER menu. Clock Setting the clock is necessary in order to use the various timer features of the TV. You can set automatic TV On or Off time. 1. Press the MENU button. 2. Press th...

Page 10 - Radio Control; TELETEXT; TOP text

Radio Control 20 This function is possible only when the set is in Radio mode.(Radio mode is displayedwhen the Setting for special menu is radio On.) 1. Use TV/AV button on remote controller to select Radio mode . 2. Press the MENU button to set Radio Setup menu. 3. Press the VOL Ïq button repeatedl...

Page 11 - Functions; External Equipment Connection

TELETEXT Special TELETEXT functions Changes Teletext mode Only Teletext mode, text mode superimposed on theTV picture, TV mode Selects double height text.Press this button to enlarge the top half of the page.Press this button again to enlarge the bottom half ofthe page.Press this button again to ret...

Page 12 - Headphone jack; Connecting PC as monitor

22 External Equipment Connection S-VIDEO INPUT If using an S-VIDEO source, the picture quality will be improved over a video source. 1. Connect the S-VIDEO output of a VCR to the S-VIDEO input on the TV. 2. Connect the audio cables from the S-VIDEO VCR to the L (MONO), R inputs on the TV. 3. Select ...

Page 13 - Sound adjustment; Position Adjustment

Connecting PC as monitor Sound adjustment 1. Press the MENU button. 2. Select the Sound menu, then press VOL Ïq . 3. Press the PR xy button to select the desired sound item; Equalizer, Balance, AVL, Surround or Sound Mode . 4. Press the VOL Ïq button to make desired adjustment. 5. Press the VOL Ïq b...

Page 14 - Picture adjustment; Product Specifications; Model

28 Connecting PC as monitor TV/AV I/II LIST SLEEP Q.VIEW MENU PC/ * PSM SSM ARC/ * REVEAL TEXT MIX SIZE HOLD INDEX UPDATE TIME MENU Picture Ș Sound Ș H/V Position Ș AutoReset 1280 x 768 60Hz Position : ƇƉ Next : ȖȘ Exit : TV/AV Picture Contrast 60 Brightness 80 Temperature 6500K Clock 50 Phase 34 AR...

Page 15 - Troubleshooting; Check item; NEC Service Centres; New South Wales

Troubleshooting No picture on screen and no soundfrom speakers No picture/No picture from AVterminal Picture is displayed, but no soundfrom the speakers. Picture is too light There are stripes on the screen orcolors fade. Picture is too dark. Remote control does not work. The picture is not sharp.Th...