NEC NEAX 2400 IPX - Manuals

Page 2 - Dial the required extension number.; To Make an Outgoing Call; Dial for outside line access.; To Call the Operator; GENERAL FEATURES

2 My Extension Number is: To Make an Internal Call Dial the required extension number. To Make an Outgoing Call Dial for outside line access. Dial the required number. To Call the Operator Dial . Last Number Redial/Stack Dial To redial any of the last 5 numbers you have dialledinternally or ...

Page 3 - Hold; Note: For exclusive hold – press Hold twice.; To Transfer a Call; †Always dial to make an external call; Conference Call; Any party may hang up to exit conference.

3 Hold To place a call on hold: Press Hold – held line flashes. To retrieve the held call: Lift handset*. Press flashing line. Note: For exclusive hold – press Hold twice. To Transfer a Call Whilst on a call press Transfer. Dial the extension number and announce the call. If call is acce...

Page 4 - Message Key; One touch access to Voice Mail System:; To Program; Enter Voice Mail System extension number.; To allow access to system speed dial numbers:; To Use; Enter number for required speed idal number.; Note: System speed feature needs to be enabled by the

4 Message Key One touch access to Voice Mail System: To Program Press Feature key. Press Message key. Enter Voice Mail System extension number. Press Feature key. To Use Press Message Key. Dterm will automatically connect to Voice MailSystem. Directory Key To allow access to system speed...

Page 5 - SOFTKEYS FEATURES; To Use Soft keys; Hold one call and make a second:; Press Softkey below “C HLD”.; Dial extension or external number; Press “C HLD” to swap between the calls.

5 SOFTKEYS FEATURES To Use Soft keys Softkeys are indicated in the LCD according to thestatus of the Multiline Terminal (telephone). Press the >>> (Scroll) key to scroll the displayuntil the desired feature appears. Press the Softkey under the indicated feature onthe LCD. The service ...

Page 10 - PROGRAMMABLE KEYS FEATURES; Call Forward All

10 PROGRAMMABLE KEYS FEATURES Call Forward All Forwards all calls immediately. SET: Lift handset*. Press Fwd All or dial . Dial extension or external number † to which your calls are to be forwarded. Hang up. CANCEL: Lift handset*. Press Fwd All or dial . Hang up. Call Forward No Answe...

Page 15 - Night Answer; UNIQUE Dterm FEATURES; Press Feature again to save.; Press desired Speed Call button.

15 Night Answer From any phone: Lift handset*. Dial . Caller is connected. UNIQUE Dterm FEATURES Speed Calling (One Touch Buttons) To program (do not lift handset): Press Feature. Press desired Speed Call button. Enter extension or external number † . Press Feature again to save. To ve...

Page 16 - To Store Numbers In Memory; Note: The MIC LED will illuminate when MIC is on.; Lamps

16 To Store Numbers In Memory To store number: List handset. Enter Enter memory number † 0 - 9. Enter number† to be stored. Wait for SPD SET to display. Replace handset. To access number: Press Redial. Enter memory number † 0 - 9. MIC (Microphone) To enable hands free conversation: S...

Page 19 - Power Save Mode

19 A n s w e rWhen the LED is flashing, press the key to answer acall waiting. TransferAllows the user to transfer a call. HoldPress this key to place an internal or external call onhold. Power Save Mode After a predetermined time, this feature dims the LCDand Line Keys. (Not applicable to Dterm IP....

Page 20 - SYSTEM INFORMATION

SYSTEM INFORMATION Main Number: Main Fax Number: Indial Number: Voice Mail Pilot: Voice Mail Indial: System Manager: SPECIAL NOTE: DATA port of DTR-2DT terminal is forMODEM connections only. NOTE: Refer to your detailed user guide (ND-91712) for advanced features. AD-28000801 ISSUE 3 MARCH 2003 Stoc...